Ba（Mg1／3Ta2／3）O3微波陶瓷的损耗研究

本工作用ＸＲＤ，ＥＰＭＡ，ＳＥＭ等测试技术计算和示出了用不同活性粉料制备的Ｂａ（Ｍｇ１／３Ｔａ２／３）Ｏ３微波陶瓷晶格中Ｂ位离子有序度和元素的面分布情况，对它们在Ｘ面下的电行为作了探讨。实验结果表明，ＢＭＴ陶瓷的微波损耗主要与其密度有序度和微观结构的均一度有关。     

变形温度和变形程度对Ti－31合金性能和组织的影响

通过高温和室温拉伸试验，研究了变形温度和变形程度对Ｔｉ－３１合金板材性能和组织的影响。结果表明，合金在７５０～８５０℃的温度下变形５％～２０％空冷后，其室温机械性能均能达到材料的技术指标要求。并发现了材料在９００℃的临界变形区。     

对遂昌金矿采场结构参数的探讨

对于遂昌金矿合理的采场结构参数，目前没有理想的确定方法。本文联系上盘围岩的构造裂隙，矿房的支护形式等提出采场稳定跨度判断指标。经４０个采场的检验，值信度达９７．５％。     

Automating the identification and analysis of protein {beta}-barrels

ßBarrels are widespread and well-studied featuresof a great many protein structures. In this paper an unsuper-visedmethod for the detection of P-barrels is developed based ontechniques from graph theory. The hydrogen bonded connectivityof ß-sheets is derived using standard pattern recognitiontechniques and expressed as a graph. Barrels correspond to topologicalrings in these connectivity graphs and can thus be identifiedusing ring perception algorithms. Following from this, the characteristictopological structure of a barrel can be expressed using a novelform of reduced nomenclature that counts sequence separationsbetween successive members of the ring set These techniquesare tested by applying them to the detection of barrels in anon-redundant subset of the Brookhaven database. Results indicatethat topological rings do seem to correspond uniquely to ß-barrelsand that the technique, as implemented, finds the majority ofbarrels present in the dataset.     

Use of inverse gas chromatography to quantify interactions in amine cured epoxy resins

Flory–Huggins interaction parameters, λ, were determined for a series of probes in an amine cured epoxy resin matrix (433–493 K) and its precursors (324–363 K) by inverse gas chromatography (IGC). Hildebrand–Scatchard theory was combined with Flory–Huggins theory in order to estimate infinte dilution solubility parameters (δ₂) for the matrix and its precursors at 298 K. It was shown that the value of the solubility parameter for the cured resin matrix lies between those of its precursors. Compared to the majority of published work, an unusual aspect of this application of IGC is that solubility parameters have been determined when the stationery phases are (i) small molecules and (ii) a highly crosslinked polymer. Moreover, all possible attempts have been made to ensure equilibrium conditions between probe and stationary phase, and compensation for asymmetry of peak profile has been applied in determining δ₂. The solubility parameters estimated by IGC are in good agreement with those calculated by other methods.     

低电阻率气层测井评价方法

粘土矿物成份是造成气层电阻率低的主要原因。用灰色静态模型计算孔隙度，用BP神经网络计算束缚水饱和度等参数。与岩心分析结果比较，储层参数计算结果精度有所提高。用储层参数建立气层和水层的判别式，判别结果与试油有较好的一致性。综合数字处理结果建立了气层产能评价模型，处理结果与试油结果比较，符合率82％。     

A Novel Topological Index F and Its Correlation With Standard Formaton Enthalpies of AB_n(g) Molecules

The topological index F* is defined and obtained by the method of a non-dimensional unit calculation in which three matrices multiply with each other. These matrices represent the connective cases of atoms in a molecule, the structural features of atoms on top and the bonded cases of the adjacent atoms respectively. The standard formation enthalpies of ABn(g) molecules were correlated with F'* (A = C, Al, Si, Ti, Zr, B = F, Cl, Br, I, H, n=1 -4) and these correlation coefficients are all more than 0.96. Some molecules (e.g CH4, SiH4,etc. )can be preferably handled by F* but can not be dealt with by other topological indices. By contrast to traditional hydrogen suppressed graph, the contribution of hydrogen atoms to structures and properties of molecules is considered.     

汽油辛烷值智能调合系统

采取一种能够在线学习、不断提高、建立一系列模型的策略，提出了一种具有学习功能的汽油辛烷值智能调合系统。该系统可以根据成品汽油辛烷值指标、生产成本和市场价格等因素提供一个较好的油品调合调度方案。实际应用结果表明，利用参数学习的方法计算调合汽油辛烷值是可行的。     

大孔距小排距的孔网参数在中深孔爆破中的应用

天铁集团的石矿厂多年来爆破效果不理想，粉矿率高，通过对爆破孔网参数的优化，采用大孔距、小排距的孔网参数在中深孔爆破中取得了较好的效果。     

孔板—均速管组合法测量汽—水两相流双参数

利用孔板与均速管组合在线测量汽—水两相流双参数，解决了稠油热采中同时测量蒸汽流量与干度的难题。其工作程序用Mcs-51单片机汇编语言编制而成，主程序由初始化、数据采集处理，热物理参数生成、汽—水两相流量、干度、质量流量、热量计算以及累计运算等模块组成。通过在现场进行标定；干度用化验CI^-法进行标定，流量用锅炉入口的涡轮流量计标定。经胜利和新疆两油田进行的大量试验可知，该仪表测量水蒸汽流量和干度其均方差皆小于7%，满足了工业应用要求。