Gas Phase Catalytic Oxidation of β-Picoline to Nicotinic Acid: Catalysts,Mechanism and Reaction Kinetics

An overview of the fundamental studies on a new method of nicotinic acid synthesis by the gas phase catalytic oxidation of β-picoline by oxygen is presented. The nature of active component in vanadia catalysts and reactivity of vanadium species are considered. Common features and differences in the mechanistic steps of nicotinic acid formation on various catalysts investigated by in situ FTIR spectroscopy are discussed. Effects of the reaction mixture components on the yield of nicotinic acid are considered in detail. Attention is paid to the kinetic equations of β-picoline oxidation on vanadia-titania catalysts.     

Performance evaluation of poly (methacrylic acid) as corrosion inhibitor in the presence of iodide ions for mild steel in H2SO4 solution

The inhibition performance of poly (methacrylic acid) (PMAA) and the effect of addition of iodide ions on the inhibition efficiency for mild steel corrosion in 0.5 M H₂SO₄ solution were investigated in the temperature range of 303–333 K using electrochemical, weight loss, scanning electron microscopy (SEM), and water contact angles measurements. The results show that PMAA is a moderate inhibitor for mild steel in 0.5 M H₂SO₄ solution. Addition of small amount of KI to PMAA significantly upgraded the inhibition efficiency up to 96.7%. The adsorption properties of PMAA and PMAA + KI are estimated by considering thermodynamic and kinetic parameters. The results reveal that PMAA alone was physically adsorbed onto the mild steel surface, while comprehensive adsorption mode characterized the adsorption of PMAA + KI. Adsorption of PMAA and PMAA + KI followed Temkin adsorption isotherm. The SEM and water contact angle images confirmed the enhanced PMAA film formation on mild steel surface by iodide ions.     

Tuned interactions of silver nanoparticles with ZSM-5 zeolite by adhesion-promoting poly(acrylic acid) deposited by electrospray ionization (ESI)

The electrospray ionization (ESI) method was used for deposition of thin films of poly(acrylic acid) (PAA) on Cu/ZSM-5 (5 wt.% Cu) and Ag–Cu/ZSM-5 (1 wt.% Ag and 4 wt.% Cu) composites. For comparative purposes, the ZSM-5 zeolite was synthesized under hydrothermal conditions and loaded with PAA under the same treating conditions as the composites. This method allowed the formation of uniform polymer films of controlled thickness on conductive substrates. The structural characteristics were characterized by X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, atomic force microscopy and X-ray diffraction (XRD). The deposited PAA layer over ZSM-5 acts as a common dispersing and stabilizing agent through coordination-driven guest-templated polymer via interaction of Ag⁺ and Cu²⁺ with carboxylic acid groups, thus increasing and controlling the adhesion and the release of metallic species. A short exposure to light and temperature has reduced the metal ions to Cu⁰ and Ag⁰ metallic nanoparticles. The results of XRD analysis let suggest that the interaction of Cu and Ag with carboxylic groups of PAA inhibits the formation of large metallic silver particles. These samples were being studied for their potential as antibacterial agents toward the bacterial strains such as Staphylococcus pneumonia, Bacillus subtilis, Escherichia coli and Pseudomonas aeruginosa as Gram positive and Gram negative bacteria, respectively. Aspergillus fumigatus and Candida albicans as Fungi were also evaluated. The Cu/ZSM-5 and Ag–Cu/ZSM-5 nanocomposites coated with a 10 nm thick PAA layer exhibit significant antibacterial activity.     

The surface energy as an indicator of miscibility of SAN/EDPM polymer blends

Surface properties of blends prepared of styrene-acrylonitrile and ethylene-propylene-diene changing the homopolymer proportions and compatibilized by high impact polystyrene have been studied by contact angle measurement. The surface free energy of interphase of homopolymers pairs, work of adhesion, and wetting coefficient were calculated using Wu’s geometric mean method and the total surface free energy and acid–base components of the blends by using van Oss, Good and Chaudhury method. Blends were also characterized by dynamic mechanical analysis and by scanning electron microscopy. The miscibility of studied blends was estimated through changes of surface free energy, energy of interface and through the shifts of glass transition temperature and changes in morphology. From the results, it can be seen that added compatibilizer reduces the interface energy and provides more homogenous system by interfacial segregation and rearrangements of molecules at the blend surface. The results of morphological observations reveal that the addition of a small percentage of compatibilizer decreases the domain size of the dispersed phase and enhances the compatibility of the blends.     

Experimental and theoretical study on amino acid derivatives as eco-friendly corrosion inhibitor on mild steel in hydrochloric acid solution

Amino acid derivatives, namely, 2-(2-oxo-2-phenothiazin-10-yl)ethylamino)-3-mercaptopropanoic acid (OPEM) and 2-(2-oxo-2-phenothiazin-10-yl)ethylamino)acetic acid (OPEA) were synthesized and investigated as inhibitors for mild steel corrosion in 15% HCl solution using the weight loss, polarization, and electrochemical impedance spectroscopy (EIS) techniques. The inhibition efficiency of both the inhibitors increased with increasing the temperature and concentration of inhibitor. The inhibitors OPEM and OPEA show corrosion inhibition efficiency of 97.5 and 95.8%, respectively, in 200?ppm concentration, at 333?K. Polarization studies showed that both studied inhibitors were of mixed type in nature. The adsorption of inhibitors on the mild steel surface obeys Langmuir adsorption isotherm and the surface of inhibited and uninhibited specimens were analyzed by scanning electron microscopy (SEM). The semiempirical AM1 method was employed for theoretical calculations and the obtained results were found to be consistent with the experimental findings.     

Editorial of the Special Issue Antimicrobial Polymers

The special issue “Antimicrobial Polymers” includes research and review papers concerning the recent advances on preparation of antimicrobial polymers and their relevance to industrial settings and biomedical field. Antimicrobial polymers have recently emerged as promising candidates to fight microbial contamination onto surfaces thanks to their interesting properties. In this special issue, the main strategies pursued for developing antimicrobial polymers, including polymer impregnation with antimicrobial agents or synthesis of polymers bearing antimicrobial moieties, were discussed. The future application of these polymers either in industrial or healthcare settings could result in an extremely positive impact not only at the economic level but also for the improvement of quality of life.     

The Key Enzyme of the Sialic Acid Metabolism Is Involved in Embryoid Body Formation and Expression of Marker Genes of Germ Layer Formation

The bi-functional enzyme UDP-N-acetyl-2-epimerase/N-acetylmannosamine kinase (GNE) is the key enzyme of the sialic acid biosynthesis. Sialic acids are negatively charged nine carbon amino sugars and are found on most glycoproteins and many glycolipids in terminal positions, where they are involved in a variety of biological important molecular interactions. Inactivation of the GNE by homologous recombination results in early embryonic lethality in mice. Here, we report that GNE-deficient embryonic stem cells express less differentiation markers compared to wild-type embryonic stem cells. As a result, GNE-deficient embryonic stem cells fail to form proper embryoid bodies (EB) within the first day of culture. However, when culturing these cells in the presence of sialic acids for three days, also GNE-deficient embryonic stem cells form normal EBs. In contrast, when culturing these cells in sialic acid reduced medium, GNE-deficient embryonic stem cells proliferate faster and form larger EBs without any change in the expression of markers of the germ layers.     

Analysis of the Binding Sites of Porcine Sialoadhesin Receptor with PRRSV

Porcine reproductive and respiratory syndrome virus (PRRSV) can infect pigs and cause enormous economic losses to the pig industry worldwide. Porcine sialoadhesin (pSN) and CD163 have been identified as key viral receptors on porcine alveolar macrophages (PAM), a main target cell infected by PRRSV. In this study, the protein structures of amino acids 1–119 from the pSN and cSN (cattle sialoadhesin) N-termini (excluding the 19-amino acid signal peptide) were modeled via homology modeling based on mSN (mouse sialoadhesin) template structures using bioinformatics tools. Subsequently, pSN and cSN homology structures were superposed onto the mSN protein structure to predict the binding sites of pSN. As a validation experiment, the SN N-terminus (including the wild-type and site-directed-mutant-types of pSN and cSN) was cloned and expressed as a SN-GFP chimera protein. The binding activity between SN and PRRSV was confirmed by WB (Western blotting), FAR-WB (far Western blotting), ELISA (enzyme-linked immunosorbent assay) and immunofluorescence assay. We found that the S107 amino acid residue in the pSN N-terminal played a crucial role in forming a special cavity, as well as a hydrogen bond for enhancing PRRSV binding during PRRSV infection. S107 may be glycosylated during PRRSV infection and may also be involved in forming the cavity for binding PRRSV along with other sites, including W2, Y44, S45, R97, R105, W106 and V109. Additionally, S107 might also be important for pSN binding with PRRSV. However, the function of these binding sites must be confirmed by further studies.     

Immobilization of pamidronic acids on the nanotube surface of titanium discs and their interaction with bone cells

Self-assembled layers of vertically aligned titanium nanotubes were fabricated on a Ti disc by anodization. Pamidronic acids (PDAs) were then immobilized on the nanotube surface to improve osseointegration. Wide-angle X-ray diffraction, X-ray photoelectron microscopy, and scanning electron microscopy were employed to characterize the structure and morphology of the PDA-immobilized TiO₂ nanotubes. The in vitro behavior of osteoblast and osteoclast cells cultured on an unmodified and surface-modified Ti disc was examined in terms of cell adhesion, proliferation, and differentiation. Osteoblast adhesion, proliferation, and differentiation were improved substantially by the topography of the TiO₂ nanotubes, producing an interlocked cell structure. PDA immobilized on the TiO₂ nanotube surface suppressed the viability of the osteoclasts and reduced their bone resorption activity.