Stability of impulsive stochastic functional differential systems in terms of two measures via comparison approach

Comparison principles for general impulsive stochastic functional differential systems are established.Employing the comparison principles and the theory of differential inequalities,stability and instability,involving two measures,of impulsive stochastic functional differential systems are investigated.Several stability and instability criteria are obtained,and two examples are also given to illustrate our results.     

黄河干流白银市水川段水面线计算方法对比分析

为克服能量方程逐段试算方法在河道水面线计算上存在的不足与局限,本文以黄河干流白银市水川段为例,采用二维水动力数值计算模型,对4种洪水频率工况下黄河干流白银市段的水面线高程进行计算,并将二维数值计算结果与能量方程计算结果进行复核和评价。经计算可知两种计算方法在计算结果上存在偏差,能量方程在河道水面线计算上是一种近似成果,而二维数值计算能够更加真实反映河道的实际情况,因此在水面线计算时推荐二维数值计算方法。     

Optimal Performance in Tracking Stochastic Signal Under Disturbance Rejection

The analysis method of optimal tracking performance is proposed for multiple‐input multiple‐output (MIMO) linear time‐invariant (LTI) systems under disturbance rejection. An H₂ criterion of the error signal between the output of the plant and the reference signal is used as a measure for the tracking performance. Spectral factorization is applied to obtain the optimal solution of the system tracking error. The explicit expressions are derived for this minimal tracking error with respect to random reference signals under disturbance rejection. It is shown that the nonminimum phase zeros, the zero direction, the unstable poles, the pole direction of a given plant, statistical characteristics of the reference input signal, and disturbance signal have a negative effect on a feedback system's ability to reduce the system error with disturbance rejection. The results show that the optimal tracking performance will further be damaged because of disturbance rejection. Some typical examples are given to illustrate the theoretical results.     

建立加气砼直观数理模型的探索

若视加气砼为细观的“两相”材料,则可建立起其细观几何结构的随机直观数理模型,本文应用随机几何的方法探索了加气砼最佳合理内部细观几何结构模型的建立,及其计算机随机模拟,由细观角度讨论了改善加气砼性能的可能性。     

温度对Ni—P化学镀层结合力影响的研究

用弯曲法、划痕法研究了镀后加热温度对Ni-P化学镀层结合力的影响,结果表明:镀后退火温度越高,镀层结合力越好,但温度过高时,镀层硬度将下降。用金相观察及电子探针分析,探讨了镀后退火温度影响结合力的机理。结果指出:退火时将在镀层和基体界面上发生Ni与Fe的互扩散,形成Ni-Fe合金扩散层,从而提高了结合力。为了能在保证镀层硬度的前提下提高结合力,本文提出了二次镀覆的设想,获得较好试验结果。     

基于单片机和DSP的数字化IGBT逆变焊机研究

主要讨论了在IGBT逆变焊机数字化改造中如何用单片机来实现面板事务管理，用DSP来实现焊接动态过程的控制问题，阐述了其硬件与软件的设计方法，论述了DSP和单片机之间通信的有关问题。     

基于电网电力设备“两态”管理体制的安全生产责任体系建设的研究与应用

介绍了安全生产责任体系建设的基本内容,分析了电网电力设备安全生产现状及存在问题,并结合相关实践经验,分别从强化电网电力设备状态检修等多个角度与方面,探讨了电网电力设备安全生产责任体系建设策略。     

Pressure drop for single and two‐phase flow of non‐newtonian liquids in helical coils

New experimental results on pressure loss for the single and two‐phase gas‐liquid flow with non‐Newtonian liquids in helical coils are reported. For a constant value of the curvature ratio, the value of the helix angle of the coils is varied from 2.56° to 9.37°. For single phase flow, the effect of helix angle on pressure loss is found to be negligible in laminar flow regime but pressure loss increases with the increasing value of helix angle in turbulent flow conditions. On the other hand, for the two‐phase flow, the well‐known Lockhart‐Martinelli method correlates the present results for all values of helix angle (2.56‐9.37°) satisfactorily under turbulent/laminar and turbulent/turbulent conditions over the following ranges of variables as: 0.57 ≤ n′ ≤ 1; Re′ < 4000; Re_l < 4000; Re_g < 8000; 8 ≤ x ≤ 1000 and 0.2 ≤ De′ ≤ 1000.     

城市污水处理厂污泥中温两相厌氧消化的研究

采用中温两相厌氧消化处理西安市污水处理厂污泥,结果表明,污泥可在较短的停留时间(296 h,产酸相30 h,产甲烷相266 h),较高的有机负荷(约2.65 kg VS/m3.d)下稳定运行,系统VS去除率38.87%,pH≈7.5,产气速率6.33 L/L.d,单位VS产气率3.00 L/g。与单相厌氧消化处理结果对比,两相厌氧消化系统的停留时间可减少一半,而污泥有机负荷提高2倍,且有机物的去除率大,处理效果好,稳定性高,抗冲击负荷能力强,产气性良好。