Time and Temperature Factors in Construction of Rock Strength Criteria

Using the synthesis of the kinetic concept on solid strength and the Coulomb - Mohr strength theory as the base, the failure conditions taking into account the time and temperature factors are obtained.     

钢样成分化验分析结果网络传输系统的开发与应用

钢样成分化验分析结果网络传输系统将碳硫分析仪、光谱分析仪和相应的计算机控制系统按以太网络结构组联,形成"炉前分析网络",采用分析网主服务器系统软件和网络分析系统软件实现网络传输。该系统可将炉前钢样化验分析结果实时传输到炉前大屏,具有传输速度快、准确率高的特点,提高了工作效率和产品合格率,降低了生产成本。     

Influence of growth rate on the structural and morphological properties of TiN, ZrN and TiN/ZrN multilayers

The effect of the deposition rate on the structural and morphological properties of TiN and ZrN single layers and TiN/ZrN multilayers deposited by radiofrequency reactive magnetron sputtering has been studied. The total pressure was kept constant and the growth rate variation was obtained by small difference of nitrogen concentration in the fed gas. The decreasing deposition rate results in a structural change in the thin films from (111) orientation to (100) one. As consequence the surface morphology becomes smoother. Films roughness is strongly related with texture and it decreases with an increase in the (100) X-ray diffraction line intensity. In order to achieve a clear interpretation of our experimental results, the ratio between the N⁺ ions of the plasma and the atoms number reaching the substrate was considered. At high deposition rate with respect to the N⁺ concentration, the chemical potential of transition metal on (100) growth surface is higher than (111) one favouring the (111) orientation of the films. On the contrary, when the growth rate is low with respect to the nitrogen concentration, the chemical potential of transition metal on (111) growth surface is higher than the (100) one leading to a preferential growth in the (100) direction.     

Ensuring primary realization of pressure unit in the vacuum range without typically utilized static expansion system

After the break-up of Czechoslovakia in 1993 the primary metrological standards authority almost fully remained in Slovakia. So we had to build our primary vacuum metrology anew. But we could do it using uptodate techniques that are more effective and they enable us to fulfil our task more effectively and in a shorter time.The steady demand to widen the lower pressure range and a steady demand for maximal accuracy collide with the financial possibilities open to a small country. So it is impossible to follow the classical pattern for the vacuum standards: liquid columns, static expansion system and dynamic expansion system. But it is possible to utilize contemporary progress in construction of piston manometers. This enables us to discard liquid column and static expansion techniques in favour of piston technique [Tesar J, Prazak D. Vacuum 2002; 67: 311, Tesar J, Prazak D, Krajicek Z. In:Proceedings of international symposium on Pressure and Vacuum, 2003. p. 169, Tesar J, Repa P, Prazak D, Krajicek Z, Peksa L. Vacuum 2004; 76: 491.]. Such system fulfils all the needs of a little industrial country and is economically acceptable.     

Strategic appraisal of energy models for Mozambique

The needs that an energy supply system must meet are constantly changing, due to technological, social and political reasons. Effective energy planning is a dynamic process that is repeated periodically and adjusts to changing conditions. Energy decision makers and planners are no longer able to rely on inductive decision making since they have to investigate the effect of various decision parameters and possible future changes. To help in this process, models have been developed where estimates of future load growth, candidate power plants, fuels and other key factors can be introduced, from which the planners can evaluate decision parameters and the available alternatives. The paper presents the different methodologies and practices that are used by 11 energy models for energy demand forecasting, supply side management and generation expansion planning, demand side management and integrated resource planning. The paper concludes to the presentation of a strategic appraisal of the examined energy models appropriate for energy planning in Mozambique. Three models are proposed for conducting demand forecasting, generation expansion planning and demand side management. Copyright © 2002 John Wiley & Sons, Ltd.     

煤粉粒度对高炉风口前燃烧性能的影响

安钢炼铁厂在喷吹瘦煤后，将小于0．074mm的比例由70％放宽到30％，使磨煤能力提高了21％。采用自行设计的风口取样器，研究了风口前气体成分和煤粉燃烧率的变化。当煤粉粒度变粗后，风口前循环区变长，放宽煤粉粒度与高富氧、高风温配合，能使高炉得到较好的经济效益。     

Delay discounting of real and hypothetical rewards.

The degree to which real and hypothetical rewards were discounted across delays ranging from 6 hr to 1 year was explored in a within-subjects design. An adjusting-amounts procedure was used to estimate the subjective value of real and hypothetical rewards at each delay. A hyperbolic discounting function provided a significantly better fit to individual participants' preferences than did an exponential function. No significant effect of reward type on degree of hyperbolic discounting or area under the discounting curves was detected. These findings offer some support for the validity of using hypothetical rewards to estimate discounting rates in substance-abusing and other populations, but caution is suggested because this support is gleaned from a failure to detect an effect of reward type. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

曼型气柜支柱的安装方法

通过对曼型气柜关键部位之一的基柱的安装和找正过程的分析，表明基柱安装前对基础进行预处理、安装时测量跟踪找正、安装后定位加固，是保证基柱安装精度的三个重要步骤。     

Prediction of the energy dissipation rate in ductile crack propagation

In this paper, energy dissipation rate D vs. Δa curves in ductile fracture are predicted using a ‘conversion’ between loads, load‐point displacements and crack lengths predicted by NLEFM and those found in real ELPL propagation. The NLEFM/ELPL link was recently discovered for the DCB testpiece, and we believe it applies to other cracked geometries. The predictions for D agree with experimental results. The model permits a crack tip toughness R(Δa) which rises from J_c and saturates out when (if) steady state propagation is reached after a transient stage in which all tunnelling, crack tip necking and shear lip formation is established. J_R is always greater than the crack tip R(Δa) and continues to rise even after R(Δa) levels off. The analysis is capable of predicting the usual D vs. Δa curves in the literature which have high initial values and fall monotonically to a plateau at large Δa. It also predicts that D curves for CCT testpieces should be higher than those for SENB/CT, as found in practice. The possibility that D curves at some intermediate Δa may dip to a minimum below the levelled‐off value at large Δa is predicted and confirmed by experiment. Recently reported D curves that have smaller initial D than the D‐values after extensive propagation can also be predicted. The testpiece geometry and crack tip R(Δa) conditions required to produce these different‐shaped D vs. Δa curves are established and confirmed by comparison with experiment. The energy dissipation rate D vs. Δa is not a transferable property as it depends on geometry. The material characteristic R(Δa) may be the ‘transferable property’ for scaling problems in ELPL fracture. How it can be deduced from D vs. Δa curves (and by implication, J_R vs. Δa curves) is established.     

Influence of Ni Interlayers on the Mechanical Properties of Ti6Al4V/(WC-Co) Friction Welds

Ni interlayers were introduced prior to dissimilar friction welding of Ti6Al4V base material to three cemented carbide substrates. The fracture strength of Ti6Al4V/(WC-6 wt% Co) welds were poor and were markedly improved when 20-µm thick Ni interlayers were introduced prior to dissimilar friction welding. These results were only produced when the (WC-6 wt% Co) cermet was electroplated prior to friction welding. When the Ti6Al4V alloy was electroplated prior to friction welding, fractured WC particles and cracking were observed in the (WC-Co) carbide substrate. The fracture strengths of Ti6Al4V/(WC-11 wt% Co) and Ti6Al4V/(WC-24 wt% Co) welds were not improved when 20-µm thick Ni interlayers were introduced prior to friction welding. During mechanical testing, the Ni layer retained at the dissimilar joint interface created a region of weakness.