聚己二酸1,2-环己二醇酯的合成

采用正交实验方法,分别以钛酸四丁酯和对甲苯磺酸为催化剂,合成了聚己二酸1,2 环己二醇酯,对其合成工艺条件进行了研究,得出了最佳工艺条件。并以所得聚酯合成了具有透明度高、硬度大、耐磨、玻璃化温度高等优异性能的聚氨酯材料。     

3-D hydrodynamics generated in a stirred vessel by a multiple-propeller system

The aim of this study is to optimize the position and the number of propellers in a non-standard tall vessel. Laser sheet flow visualization experiments were carried out for selected geometrical arrangements which produced stable flow patterns and good transport between the propellers. Four double-propeller arrangements corresponding to frequent industrial cases and a three-propeller system have been chosen. Comparison of LDA measurements in the r-z plane, dimensionless global parameters N_Qp, Nt_m, N_p, E_p and spatial distribution of local energy dissipation rate ? shows that a three-propeller system is the most efficient.     

Telerobot-enabled HUB-CI model for collaborative lifecycle management of design and prototyping

The HUB-CI model is investigated in a telerobotic system in a client/server network to manage the lifecycle of engineering design and prototyping. The purpose of this platform is to support collaborative engineering design and proof of concept to enhance distributed team collaboration and resource utilization. The suggested platform is exemplified in two collaboration support tools and a physical prototyping platform. Structured Co-Insight Management is developed to support innovative idea exchanges and the consensus decision-making during the design process. Conflict/error detection management helps preventing conflicts and errors during the lifecycle of design and development. Physical collaboration over the network occurs when a team controls the telerobot operation during prototyping and testing in design cycles. A pilot system is implemented with a group project for the design of an electronic circuit (including both hardware and software designs). The functional assessment method is used to compare this platform to other collaborative design tools. The system presented offers unique qualitative advantages as an integrated collaboration support system.     

TESTS FOR FRACTIONAL INTEGRATION:A MONTE CARLO INVESTIGATION

Abstract. The performance of the Geweke-Porter-Hudak (GPH) test, the modified rescaled range (MRR) test and two Lagrange multiplier (LM) type tests for fractional integration in small samples is examined using Monte Carlo methods. Both the GPH and MRR tests are found to be robust to moderate autoregressive moving-average components, autoregressive conditional heteroskedasticity effects and shifts in the variance. However, these two tests are sensitive to large autoregressive moving-average components and shifts in the mean. It is also found that the LM tests are sensitive to deviations from the null hypothesis. As an illustration, the GPH test is applied to two economic data series.     

声频谱测井仪器的研制和野外实验

研制成功的声频谱测井仪器在井下发射和接收三种频率的声波信号,其中发射和接收20kHz声波信号的声系有一个发射和四个接收探头,源距为2．1～2．568m,间距为0．156m;发射和接收40kHz声波信号的声系由一个发射和两个接收探头组成,源距1．0—1．5m,间距0．5m;发射和接收10kHz声波信号的声系由一个发射和两个接收探头组成,源距为2．168—2．668m,间距0．5m．用三种不同的频率的声波进行测量记录目的是获得井壁径向深度不同处介质的声学信息,而且不同频率的声波信号在岩石中传播过程中频谱变化也是井壁岩层的可用声学信息．在井下的信息采集、数据传输、地面记录和监控全部由计算机控制．该仪器已经在大庆油田的三口井中成功的进行了野外实验．     

锡崖沟瀑布景观工程水力模型试验研究

根据锡崖沟景区规划设计,沿锡崖沟水库溢洪道下部开凿底洞引水,在水库下游红岩大峡谷常年形成20 m宽大瀑布.以满足瀑布流的重力和紊动阻力相似的原则进行了其正态模型设计.通过模型放水试验表明：流量变化对瀑布水流流态影响很大,溢流槽空间狭小,加之上游进口扇形扩散段扩散角偏大,水流扩散不充分,堰顶溢流不均匀,瀑布景观效果差.将模型的溢流堰顶修改为T型复式断面后,顺应了水流的流动特性,在各级流量下均能获得比较好的瀑布景观效果.     

一维炉系统的测试实验

一维炉是一种研究煤的热解燃烧和结渣等方面的实验系统,可用于模拟电厂煤粉的燃烧特性。以元宝山褐煤为燃料,介绍了一维炉的结构和功能,并对系统的可靠性进行了验证,利用烟气分析仪及热重分析仪对燃烧后的尾部烟气及灰渣进行了分析测定。结果表明:尾部烟气含氧量与灰渣可燃部分剩余量均在理论计算值的误差允许范围内,说明一维炉密封良好,系统内各部分正常运行,对维炉的调试和研究具有一定的参考意义。     

汽车构造实验网络教学辅助系统设计

为切实提高汽车专业教学水平,建立全方位教学体系,设计基于网络的汽车构造实验教学辅助系统。系统充分利用学校现有计算机网络平台,利用多媒体和网络开发技术,开发或整合多媒体资料,开辟学习交流平台,依据课程学习规律和认知特点,建立起方便快捷、生动有趣的实验教学辅助系统。该系统基于现有教材,又高于教学内容,不仅对于传授汽车zai新技术和剖析专业难点,调动学习积极性,具有重要补充和推动作用,而且对于教学示范中心创建工作,也具有重要意义。     

桃汛试验对万家寨水库冲淤影响分析

通过对桃汛试验前后两个时段对比分析,认为桃汛试验没有增加万家寨库区淤积;库区淤积形态有所调整,淤积三角洲向坝前推进,库尾段平均河底高程没有抬升.     

低碳能效型水利数据中心的规划与建设

围绕对低碳能效型水利数据中心的认识与理解,从数据中心基础设施规划与建设的角度,对基本内涵、设计理念、实施方法、最佳实践、核心技术等展开分析和讨论,以期在新建或改造水利数据中心的过程中发挥一定作用,满足数据中心建设绿色环保、节能减排的要求,顺应未来新一代数据中心发展的趋势。