用铸造废砂制备磷酸盐泡沫陶瓷的研究

以经过活化处理后的铸造废砂为主要原料，以磷酸和磷酸盐为发泡固化剂，再配以必要的添加剂，通过混合搅拌、浇注成型、烧结强化工艺制造的磷酸盐泡沫陶瓷具有高强和多孔特征。研究表明：影响材料性能的主要因素有废砂活性、磷酸、添加剂、烧结工艺以及混合料中的铝硅比等。技术经济分析表明了这项工艺技术具有废物利用量大．生产过程简单，产品用途广泛，对铸造行业的废弃物资源化具有积极意义。     

黄金冶炼厂污染源治理技术

本文阐述了采用加温加压无氰解吸、金电解精炼，活性炭酸洗、火法再生产工艺，所产生污染物的治理技术。     

浅谈无剥离微负压废旧轮胎热解技术产业化

结合工程实践，详细介绍了无剥离、微负压废旧轮胎热解技术的技术特点、工艺流程、主要设备选型及主要技术指标。并分析了废旧轮胎热解技术产业化的前景。     

Effect of ground rubber powder and devulcanizates on the properties of natural rubber compounds

Ground rubber powder (GRP) and devulcanized rubber (Dev.R) waste through a continuous shear‐flow reaction were used as fillers for virgin natural rubber. A Horikx plot and the gel fraction proved that both main‐chain scission and crosslink scission occurred during the devulcanization. The cure characteristics, swelling behavior, crosslink density, and mechanical properties were studied. GRP and Dev.R, generated from passenger car and light truck tires, showed applicable mechanical properties in the new rubber compounds, and the compounds containing Dev.R demonstrated better properties than those containing GRP. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 208–217, 2005     

Lead recovery from aqueous environment by using porous carbon of citrus fruits waste: equilibrium,kinetics and thermodynamic studies

ABSTRACT

The mixture of citrus fruits (orange, grapefruit, mandarin, and lemon) wastes was utilized to obtain high surface area activated carbon (AC) by H₃PO₄ activation. The production conditions were optimized and the optimum conditions were determined. The optimal-activated carbon (CFWAC) was characterized by various physicochemical techniques. CFWAC was also used as a sorbent for Pb (II) ions from water. Batch experiments were performed to explore the adsorption capacity and mechanism. The Langmuir isotherm and pseudo-second-order kinetic model showed good fitness to the experimental data. The maximum Pb (II) adsorption capacity of CFWAC was found to be 163.93 mg/g.     

活性炭吸附法处理麦麸膳食纤维废水的研究

采用活性炭吸附的方法来处理麦麸膳食纤维废水。实验结果表明,当活性炭的投入量为160 g/L,接触时间为20 m in,温度为55℃,pH值在小于5的条件下能有效处理该废水,CODC r的去除率最高达96.89%,BOD5的去除率最高达96.61%。     

Fenton试剂处理苯酚和甲醛废水的研究

用H2O2同Fe^2 结合的Fenton试剂处理有机废水是一种经典的催化氧化法，这种方法适合于处理废水中高浓度、难降解的有机物质。主要研究了Fenton试剂处理含苯酚和甲醛有机废水样的反应机理和影响因素，试验结果表明：废水中苯酚和甲醛的去除率均可达到95％以上，COD去除率达到85％以上，表明用Fenton法处理含苯酚和甲醛的有机废水是一种非常有效的方法。     

糖蜜酒精废液处理技术

介绍了甘蔗制糖生产中国内外糖蜜酒精废液的处理方法，对不同处理技术的特点进行了分析，认为焚烧法既能彻底处理糖密酒精废液，又能把废液处理和资源回收相结合，并概述了国内外废液焚烧技术。     

焚烧法处理含酚废水

铸造粘结剂生产中排出的污水含酚浓度高达６％,ＣＯＤｃｒ浓度高达１７８５００ｍｇ／Ｌ,采用萃取、吸附等方法均能达标排放。采用焚烧法处理浓度高、水量小的含酚废水,焚烧尾气中的有害物远远低于《大气污染排放标准》,本文介绍了废水焚烧所需的条件及焚烧炉运行的技术参数。