Continuous precipitation of calcium sulfate dihydrate from waste sulfuric acid and lime

Precipitation of calcium sulfate dihydrate, gypsum, from (i) a pure sulfuric acid/lime suspension and (ii) a waste sulfuric acid/lime suspension in a continuous pilot plant in the temperature range from 40 °C to 80 °C was studied. It was observed that in the case of waste sulfuric acid with a high content of Mg²⁺ and Fe²⁺ ions, several hours after the beginning of the precipitation, partial dissolution of the product and modification of the crystals from needle‐ and plate‐like to agglomerated structures occurred. It is suggested that the secondary changes occur due to the increased concentration of Mg²⁺ and Fe²⁺ ions in the reactor. Below 60 °C, and above 70 °C plate‐like and needle‐like single crystals respectively were formed. The mean size (d₅₀) of the crystals was found to increase with increasing temperature and decrease with the initial concentration of lime. Gypsum produced between 70 °C and 80 °C is suitable for further processing for construction plaster. In a precipitation process with pure sulfuric acid only single perfect needle‐like crystals occurred. Copyright © 2005 Society of Chemical Industry     

泡沫酸化工艺对川中低压裂缝性油藏适应性的认识

针对川中油田经过多年的消耗式开采,各主产油田压力很低,增产改造的难度增大的发展现状,提出应用泡沫酸化工艺技术在川中低压油层增产改造的技术方案,其中分析了泡沫酸的物理特性、其在地层优良的渗流特性(滤失小、酸岩反应速度慢、返排迅速等优点),并进行了泡沫酸液体系的室内配方研究,提出了工艺设施的矿场配套研究内容.得出了泡沫酸化工艺对川中低压裂缝性油藏改造具有很强的适应性,具有推广应用的价值.     

JETS,PLUMES AND BUOYANT JETS IN STATIC ENVIRONMENT

Turbulence represents an essential aspect in atmospheric and oceanic circulations.In particu-lar,it is a preponderant factor in the dispersion of pollutants of artificial or natural origin.Thevertical turbulent jets,plumes and buoyant jets discharging into static environment is one of themost important and basic flow patterns related with the environment pollution.These flows havenumerous important applications,for example,thrust augmentors,waste disposal plumes fromstacks and combustion systems,and significant problems of turbulent diffusion.     

Coliphage prevalence in high school septic effluent and associated ground water

At the present time, somatic and male-specific coliphage and human enterovirus groups are being considered as indicators of possible pathogenic human enteric virus contamination from fecal contamination. A primary attribute for any indicator of fecal contamination is its prevalence at the source and in associated ground water. It must be consistently found in the source material at concentrations that are measurable with available techniques. Over a period of ten months, male-specific and somatic coliphage ranged from 7000 to 4,000,000 PFU/L in the effluent from a multi-user septic-tank. Unlike the values determined for septic-tank effluent, coliphage concentrations measured in ground water over this same period only varied by five-fold. Coliphage concentration in ground water under the down-gradient edge of the drainfield contained 1000 PFU/L. This concentration decreased at −1 log₁₀/5 m during 17.4 m of ground-water transport. From these data, coliphage concentrations in septic-tank effluent seem sufficient to allow their use as indicators of fecal contamination in ground water.     

用废旧橡胶生产精细胶粉的空气涡轮制冷低温粉碎法

利用先进的空气涡轮制冷系统，在低温条件下，将废旧橡胶进行冷冻，粉碎，制成60目以上细度的精细胶粉，此法简称ATCG法，它的冷冻能耗成本仅为国际上通用的液氮法的十分之一，整个工艺过程不产生二次污染，为精细胶粉的制取开辟了一条新途径。     

聚氨酯泡沫夹克管生产材料的代用

介绍一种用于生产聚氨酯泡沫夹克管保温层的新材料聚酯聚醚，报道选用这种材料生产泡沫夹克管的工艺及工要工艺参数和产品达到的技术指标及现场应用情况。     

以废钡渣为原料制取氯化钡的研究

本文研究了以直接耐晒黑Ｇ染料生产中的废钡渣为原料制取氯化钡的方法，氯化钡的得率达到废钡渣量的７０．９９％，产品质量达到一级品的标准。     

利用含钨废催化剂生产钨酸的工业实践

笔者较为详细地阐述了利用含钨废催化剂生产钨酸的工艺流程、各工序反应原理及其操作工艺实践、产品质量情况、原辅材料单耗等。实践证明 ,该工艺实用性强 ,具有显著的经济效益、社会和环保效益。     

Mechanical and microstructure studies on the modification of CA film by blending with PS

DriedMusa paradiciaca (banana) stem and veins of the leaves, which were hitherto discarded as a waste, were collected and used as starting material for the preparation of cellulose and cellulose acetate. This cellulose acetate was mixed with polystyrene to form blend of cellulose acetate-polystyrene in order to provide enhanced stability and extended utility to the end products. The films of these composites or their individual partners were made separately and studied for their mechanical properties, chemical modification and morphological changes. We report here that banana stem is good source of cellulose and that cellulose completely undergoes modification upon esterification.     

Effect of the degree of crosslinking on penetrant transport in polystyrene

The effect of the degree of crosslinking of glassy polymers on the transport mechanism of penetrants was investigated using a series of divinyl benzene (DVB)-crosslinked polystyrenes of nominal crosslinking ratio X from 0.001 38 to 0.060 mol DVB/mol styrene. The number average molecular weight between crosslinks, $\text{M}\text{?}{}_{\mathrm{<mtext>c</mtext>}}$, was determined from equilibrium swelling experiments in cyclohexane. Dynamic swelling experiments with cyclohexane at 30°C showed that the mechanism of penetrant transport was anomalous. An overshoot in the penetrant uptake was observed, characteristic of macromolecular relaxations and of changing solubility of the cyclohexane in the continuously swelling polystyrene. Photographs of various samples during the swelling process showed that solvent crazing occurred predominantly in loosely crosslinked samples.