Biogas and biomass technology: Energy generation from biomass and waste in the Netherlands

Within the European Community, the interest in energy generation from biomass and waste is increasing. A brief overview is given of several thermal conversion technologies, of biomass production and waste availability in the Netherlands. Based on this, the possibilities for energy generation from biomass and waste in the Netherlands are evaluated.     

恒运电厂5号机抽汽供热改造

介绍半高压单缸凝汽式汽轮机改造为抽汽拱热式组的设计思路及施工改造过程，对改造中出现的新问题进行了分析并提出解决办法，改造后，机组抽气直接供给热网，社会效益和经济效益明显。     

含氚废水水泥固化实验研究

研究用水泥固化处理氚废水,并选择了最佳配方:水与灰的重量比=0.45～0.5,水泥与石膏重量比=5∶1。用IAEA推荐的方法做浸出实验。为了减少水泥固化体中氚的浸出量,实验了几种涂层材料。沥青涂层可将固化体氚的浸出率降低1～2个量级。     

Temperature and pressure effects on supercritical CO2 extraction of tomato seed oil

Tomato seed oil was extracted with supercritical carbon dioxide in a semibatch-flow extractor within the temperature range 313–343 K and the pressure range 10.8–24.5MPa. The extraction rates increased with pressure, but decreased with temperature increase because of the variation in solvent density and resultant differences in oil solubility. The fatty acid composition of the extracted oil was similar to that of soybean oil.     

余热利用系统多目标优化模型及应用

以炭黑生产中的余热利用系统为背景建立了余热利用系统多目标优化规划数学模型;阐述了模型的求解方法;给出了实例分析。     

脱苯工艺的节能改造

焦化厂富油脱苯工艺中，管式炉法较蒸汽法节能。本溪钢铁公司焦化厂产焦１８０万ｔ／ａ的装置，其富油脱苯工艺由蒸汽法改为管式炉法后，每年可节煤７０００ｔ。     

热采水平井整体开发草13块砂砾岩薄层特稠油

热采水平井技术是科学有效开发稠油油藏的重要手段。以胜利油田草13块为例，系统论述了利用热采水平井整体开发具有边底水的砂砾岩薄层特稠油油藏的开发程序和研究方法。在油蒇精细描述的基础上，通过热采筛选、产能评价、直井和水平井数值模拟、开发方式优化及指标预测等油藏工程研究技术方法，综合论证了利用热采水平井整体开发草13块的必要性和可行性，总结了砂砾岩薄层特稠油油藏水平井油藏工程设计中应遵循的原则，并在生产实践中见到明显效果，为胜利油田其它区块和类似油田的开发提供了借鉴和指导。     

稠油油藏的注汽量预测

利用HCZ预测模型，可对已开发油田的年产量和累计产量进行全程预测，并且在实际应用中取得了较好的预测结果。本文结合稠油田的实际情况，推导出HXZ预测模型在热采中注汽参数的预测公式。结合曙光油田曙1－7－5块的开发数据进行了预测，效果较好。     

A guided wave inspection technique for nuclear steam generator tubing

The utility of guided ultrasonic waves for increasing the efficiency and sensitivity of nuclear steam generator tubing evaluation by nondestructive means is explored. The basic theoretical background of guided waves in tubes is presented, with major emphasis placed on those results with direct relevance to NDE applications. The possibility of increasing the inspection range of the guided wave modes as well as their sensitivity to defects by proper choice of mode and frequency is also discussed.     

含钒废水净化回收技术研究

本文讨论了五氧化二钒生产过程中所排出废水的处理方法。认为采用焦亚硫酸钠及硫酸亚铁联合还原中和法为最佳,其技术关键为联合还原剂投料比、pH值、时间及含钒污泥提钒。年处理18万吨废水,可消除80余吨Cr~(+6)、V、Cu等重金属离子污染黄浦江上游水源,能回收粗红钒和含钒污泥提钒,使金属回收率提高4％。