本体聚合中的预热和过滤

讨论了本体聚合中预热和过滤的顺序，对冷过滤、热过滤的优缺点进行了探讨，提出了建议     

原位聚合制备尼龙6/纳米SiO2复合材料研究

对原位聚合制备尼龙6／纳米SiO2进行研究。结果表明，无论是否对纳米SiO2复合材料进行偶联化处理，其表面均将在原位聚合过程中与尼龙6产生接枝；SiO2表面接枝物的生成，可在某种程度上造成体系结晶程度的降低，但复合体系的力学性能主要由SiO2粒子的分散程度、粒子和其体之间的相界面性质等因素决定；采用经偶联剂处理并具有较小粒径和较大比表面积的SiO2对尼龙6进行复合，可使复合体系的力学性能指标达到较高的水平，且硅烷偶联剂的最佳用是为SiO2的3％左右。     

Synthesis of Super-Microporous Aluminosilicate Having Excellent Water Vapor Adsorption Property as an Adsorbent for an Adsorption Heat-Pump

The synthesis of super-microporous aluminosilicate with a pore diameter of 14.6 Å has been achieved, by means of synthesis under specified conditions with a skeletal material comprising TMOS and a small quantity of sodium aluminate, and a conventional alkyl-trimethylammonium halide (C₁₀TMABr) as a template. This super-microporous aluminosilicate has an adsorption capacity of 0.2 ml/g at a relative water vapor pressure of 0.2, and thus is promising as an adsorbent for an adsorption heat-pump.     

Experiments of a prototype wind-driven reverse osmosis desalination system with feedback control

A prototype wind-powered reverse osmosis desalination system was constructed and tested on Coconut Island off the northern coast of Oahu, Hawaii, for brackish water desalination. The system has four major subsystems: a multi-vaned windmill/pump, a flow/pressure stabilizer, a reverse osmosis module, and a control mechanism. The feedback control mechanism, developed by this study, allowed this prototype system to be operated satisfactorily under mild ambient wind of 5 m/s or less. No auxiliary power source was needed. The system operational data showed that at an average wind speed of 5 m/s, brackish feedwater at a total dissolved solids concentration of 3000 mg/1 and at a flow rate of 13 1/min could be processed by this system. The average rejection rate of this prototype system was 97% and the average recovery ratio was 20%. The energy efficiency of the system was measured at 3 5%, which is comparable to the typical energy efficiency of well-operated multi-vaned windmills. Generally, the system's energy efficiency decreases as wind speed increases.     

筏板基础在自贡地区高层建筑设计中的应用研究

文章结合工程设计经验对自贡地区的高层建筑在选用天然筏板基础的设计过程中,对高层建筑基础设计中涉及到的重要的地基沉降计算、结构设计和地下水等有关问题的处理进行了具体分析,对在一般高层建筑中采用天然筏板基础的实用性和可行性从设计和施工两个方面进行了相关的工程探讨。     

工业酚水稀释的RBF神经网络预测控制

针对酚水稀释过程中酚水流量不便测量的工程情况,提出了一种基于RBF（径向基）神经网络的预测控制方法.在酚水罐每个液位变化周期内使用计算机定时测量液位高度,并将这些高度值作为目标输出,在每个循环结束时训练RBF网络,利用RBF网络的逼近能力来实时预测酚水流量,从而控制清水的配比,实现酚水质量浓度的稳定.该方法可避免测量误差带来的干扰,提高控制精度.     

用金属卟啉络合物引发合成高分子量聚醚

介绍了用四苯基卟啉铝络合物催化体系合成高分子量聚醚的方法。该聚合过程显示出一种持续特性。产物具有均一的链长和极窄的分子量分布，且数均分子量Ｍｎ可通过改变单体与引发剂的摩尔比来控制。     

Well-defined polymer precursors synthesized by RAFT polymerization of N,N-dimethylacrylamide/N-acryloxysuccinimide: random and block copolymers

N,N-dimethylacrylamide (DMA) and N-acryloxysuccinimide (NAS) were copolymerized by the reversible addition–fragmentation chain transfer (RAFT) polymerization technique, to obtain random and block copolymer precursors onto which different side-groups may be statistically grafted via the reactive NAS units. These reactive copolymers have interesting applications in various fields such as coatings and paints, water purification and biology. Random poly(DMA-co-NAS) copolymer chains were synthesized with a 75/25 molar ratio, high conversion, an excellent molecular weight (MW) control from 5000 to 130 000 g mol⁻¹, and low polydispersity index (M_w/M_n<1.1). Poly(DMA-b-NAS) block copolymers were synthesized by a two step method, in which a poly(DMA) homopolymer was prepared first and then used as macro-chain transfer agent to polymerize NAS. For example, a poly(DMA-b-NAS) sample was obtained with an average molecular weight of 44 300/7400 g mol⁻¹ corresponding to 447 DMA and 44 NAS units. Such block copolymers had not yet been synthesized by any controlled polymerization technique. They can be used to prepare polymers with exactly the same backbone and an increasing number of different side groups (e.g. hydrophobic, ionic or fluorescent).     

4－氨基安替比林比色法测定水中苯胺类

基于苯胺与４－氨基安替比林的显色反应提出一种新的苯胺测定方法。本方法可以测定浓度为０．０２～４０ｍｇ／ｌ的苯胺水样，方法的回收率为９５．９％～１０２％，相对标准偏差为０．６３％～１．９７％。