纳米Fe_2O_3作为润滑油添加剂的摩擦磨损性能

采用烧结方法制备得到纳米α-Fe_2O_3,利用X射线衍射仪(XRD)和透射电镜(TEM)对样品进行了表征,研究了纳米α-Fe_2O_3作为液体石蜡添加剂的摩擦磨损性能。结果表明,添加纳米添加剂后,润滑油摩擦系数改变不明显,但磨损率显著降低。磨损率与纳米α-Fe_2O_3添加剂的表面积和添加量密切相关,当纳米材料的表面积为47m~2/g时磨损率最低,磨损率值降低为3.78×10~(-15) m~2/g;添加量为1.0wt%,润滑油磨损率最低。     

品味童装——看图案设计在童装中的应用

图案是所有设计专业的学生在学校学习时所必修的一门专业基础课。纵观中华五千年的文明,哪一朝哪一代都有自己独特的图案风格。那么,在今天的图案设计特别是儿童服装的图案设计与应用中,怎样为孩子营造一个童话的世界,展现孩子的童真与童趣?一名优秀的童装图案设计师,应该充分利用自然环境,社会环境,民族心理和传统文化结构所赋予的条件,来解决这个问题,从而构思出独特完美而富有表现力的童装图案设计作品。     

Optimal replacement policy for a two-dissimilar-component cold standby system with different repair actions

In this paper, a cold standby repairable system consisting of two dissimilar components and one repairman is studied. When failures occur, the repair of both component 1 and component 2 are not ‘as good as new’. The consecutive operating times of component 1 after repair constitute a decreasing geometric process, while the repair times of component 1 are independent and identically distributed. For component 2, its failure is rectified by minimal repair, and the repair time is negligible. Component 1 has priority in use when both components are good. The replacement policy N is based on the failure number of component 1. Under policy N, we derive the explicit expression of the long-run average cost rate C(N) as well as the average number of repairs of component 2 before the system replaced. The optimal replacement policy N*, which minimises the long-run average cost rate C(N), is obtained theoretically. If the failure rate r(t) of component 2 is increasing, the existence and uniqueness of the optimal policy N* is also proved. Finally, a numerical example is given to validate the developed theoretical model. Some sensitivity analyses are provided to show the influence of some parameters, such as the costs for replacement and repair, and the parameters of the lifetime and repair time distributions of both components, to the optimal replacement policy N* and corresponding average cost rate C(N*).     

On detecting active worms with varying scan rate

Active worms have posed a major security threat to the Internet and many research efforts have focused on them. However, defending against them remains challenging due to their continuous evolution. In this paper, we study a new class of defense-oriented evolved worms, the Varying Scan Rate worm (the VSR worm in short). In order to circumvent detection by existing worm detection schemes, the VSR worm deliberately varies its scan rate according to these schemes’ weaknesses. To counteract the VSR worm, we design a new worm-detection scheme, the attack-target Distribution Entropy-based Dynamic detection scheme (DED detection for short). DED detection utilizes the attack-target distribution and robust statistical feature in conjunction with dynamic decision adaptation to distinguish worm-scan traffic from non-worm-scan traffic. We present a comparatively complete space of detection schemes and conduct extensive performance evaluations on the DED detection scheme compared with other schemes, using real-world Internet traces as background scan traffic. Our data clearly demonstrate the effectiveness of the DED detection scheme in detecting both the VSR worm and the traditional worm.     

On the estimation of adequate test set size using fault failure rates

Test set size in terms of the number of test cases is an important consideration when testing software systems. Using too few test cases might result in poor fault detection and using too many might be very expensive and suffer from redundancy. We define the failure rate of a program as the fraction of test cases in an available test pool that result in execution failure on that program. This paper investigates the relationship between failure rates and the number of test cases required to detect the faults. Our experiments based on 11 sets of C programs suggest that an accurate estimation of failure rates of potential fault(s) in a program can provide a reliable estimate of adequate test set size with respect to fault detection and should therefore be one of the factors kept in mind during test set construction. Furthermore, the model proposed herein is fairly robust to incorrect estimations in failure rates and can still provide good predictive quality. Experiments are also performed to observe the relationship between multiple faults present in the same program using the concept of a failure rate. When predicting the effectiveness against a program with multiple faults, results indicate that not knowing the number of faults in the program is not a significant concern, as the predictive quality is typically not affected adversely.     

Online face recognition system based on multi-view algorithm and Kernel PCA

An online face recognition system is presented in the paper. To online face recognition system, we should consider the recognition rate, the image compression and image size. In the paper we researched the innovation technologies for face recognition system, including Kernel Principal Component Analysis （Kernel PCA）, Delta low-pass wavelet filter, and face recognition algorithm using multiple images. Kernel PCA is derived to classify the characteristics of training images in the database. Delta low-pass wavelet filter is used to reduce the image size. A face recognition algorithm using multiple images is presented to improve the recognition rate. Simulation experiment shows that in the case of packet loss recognition rate is improved highly.     

"Publishing opinions: A note on the usefulness of commentaries": Comment.

Comments on J. J. Christensen-Szalanski and L. R. Beach's (see record 1984-21471-001) conclusion that the attention given to commentaries and replies to articles did not justify the extra space and argues that citation indexes do not measure the major usefulness of these commentaries. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

熔体流动时间法测定PBT树脂特性粘数的研究

开发了一种新的特性粘数分析方法 ,该方法采用熔体流动时间计算特性粘数 ,与经典特性粘数分析方法有很好的相关性且具有分析时间短、费用低、无污染等优点。     

水利对粮食生产贡献率的认识与思考

针对目前很多人对农业科技进步贡献率和水利对粮食生产贡献率的不同认识,从发展历程、概念内涵、测算思路方法等方面,剖析了二者差异,认为二者在测算范围上存在大口径与小口径的差异,在测算对象上存在增量与总量的差异,在测算指标上存在产值与产量的差异,在测算方法上存在余值法与有无对比法的差异,为正确认识这两个指标提供了参考。