Effect of structural period and ground motion parameters on the earthquake response of asymmetric buildings

The results of a parametric study of torsional coupling effects in the response of asymmetric buildings to a grouped selection of 45 strong motion earthquakes from Europe, North America, the Middle East and Southern Pacific are presented. The period dependency of the key response parameters is studied in relation to the site dependent criteria employed by certain earthquake-resistant design codes for specifying the lateral shear forces to be resisted by the structural frames and/or walls. Unlike lateral forces, the torsional response is relatively insensitive to the ration of peak ground accelaration to velocity, which has been used in previous studies as a measure of the effect on earthquake ground motions of site soil conditions and epicentral distance. The results show that the effect of torsional coupling on edge displacement response is more pronounced in stiff, short period structures. However, the dynamic shear and torque responses are relatively insensitive to variations in structural period. Codified design provisions for torsional effects specified in the United States, Canadian and European seismic building regulations are assessed, along with alternative proposals, in relation to the analytical results. It is concluded that in some cases special provisions are needed for short period asymmetric systems, a feature which has been neglected by the codes and inadequately accounted for in previous proposals.     

ZG3Cr13钢经长期时效后组织及硬度的研究

研究了ZG3Cr13钢在550℃～600℃的工作温度区间经2500h长期时效后的硬度及组织的变化。结果表明，在时效1000h内，硬度有明显的下降，之后趋于稳定；组织变化与正常处理后的组织均匀化程度有关，原始组织越均匀组织稳定性和热强性越高。     

柔性植物阻流特性研究

河流中的植物不仅影响河流的泄洪能力而且在生态的修复中起重要作用,因此对含植物明渠水流的阻力特性及紊流特性的研究显得非常重要。将河道中含柔性植物的水流视为充分发展了的紊流,在实验室中用特定材料模拟柔性植物,通过水槽试验用三维ADV对淹没柔性植物段紊流特性进行了测量研究,分析了含淹没柔性植物明渠水流的水力学特性及阻力特性并得出其曼宁糙率n的变化规律。对试验结果分析表明,含淹没柔性植物的垂向流速分布不再符合指数分布;其紊流具有明显的各向异性特性;植物冠层交界处,水流紊动交换强烈,该处紊流强度及雷诺应力出现最大值。     

注入氮离子的SiC涂层阻氢性能研究

利用离子束混合－离子注入（Ar^ ）和磁控溅射相结合的实验技术在HR－1不锈钢基体上制备了注入N^ 的SiC涂层，并用表面分析手段对所制备涂层的表面形貌，剖面形貌、相结构，表面成分，表面元素的化学态进行了分析，结果表明：制备的涂层结构致密，表面平整、膜层成分均匀；涂层与基体之间形成了一明显的过渡层，增强了涂层和基体之间的结合力，用二次离子质谱（SIMS）对充氘涂层的阻氢性能进行了定性分析，结果表明，涂层元素与氢形成稳定的化学键，抑制了氢的扩散和迁移，使得涂层具有一定的阻氢能力。     

1999年三峡大坝混凝土温控防裂研究与实践

1999年，为三峡工程二期施工阶段由开挖为主转入混凝土浇筑高峰期的关键一年，面临混凝土浇筑强度高、进度紧、温控设计要求严、高温季节浇筑基础约束区混凝土和施工设备投产晚的严峻局面。长江委设计院对1999年高温季节浇筑大坝基础约束区混凝土进行了专题研究。通过对大坝温度应力仿真研究和夏季各种温控措施效果分析，提出了夏季浇筑基础约束区混凝土的综合温控防裂措施。通过三峡工程参建各方共同努力，全面实施综合温控防裂措施，达到了预期效果，避免了大坝基础约束区产生危害性贯穿裂缝，并为顺利完成混凝土年度计划和形象面貌创造了有利条件。     

耐火纤维喷涂技术的优越性及应用

详细介绍了耐火纤维喷涂技术及施工等各方面的优越性。同时说明耐火纤维喷涂技术,在大庆石化公司炼油厂润滑油白土装置扩建改造中加热炉炉衬上的应用及取得的明显节能效果。     

Synthesis of diamond crystals and films using an oxygen-acetylene flame under atmosheric pressure

Diamond growth with rates up to 100 to 140 μm/hr was achieved using an oxygen-acetylene combustion spraying technique in an atmospheric environment. Investigations on the processing indicated that the gas flow ratio, substrate position, substrate temperature, temperature distribution, and substrate pretreatment were the most important factors affecting the growth of diamond crystals. Evaluation by means of X-ray diffraction, Raman spectroscopy, scanning electron microscopy, and electron probe microanalysis showed that the synthesized diamond was nearly perfect in morphology, structure, and purity.     

进口与国产高强度耐磨钢板的组织及力学性能

观察了进口、国产高强度耐磨钢板的组织，测试了它们的力学性能及耐磨性能。结果表明，国产准贝氏体钢耐磨板具有良好的强韧性配合，耐磨性能超过进口耐磨钢板，能够替代进口板作为高强度耐磨板。     

Simulation of the Forming Behaviour of a Boron Modified P91 Ferritic Steel

The forming behaviour at high temperature of a modified 9%Cr‐1%Mo (P91) ferritic steel containing B and Ti for elevated temperature service was investigated. The microstructure of the as‐received material is mainly martensite at room temperature, but special etching revealed prior austenite grains of about 25 μm in size. Torsion tests were conducted at temperatures in the range 850 to 1250 °C to simulate the hot rolling process under comparable conditions of temperature, strain rate and strain. The deformation data obtained from these tests were correlated with the Garofalo equation with a stress exponent of 4.6 and an activation energy of 315 kJ/mol. This equation was used to predict the formability behaviour for the rolling process and also to determine the maximum forming efficiency and stability of the steel. A temperature of 1200 °C is recommended to conduct the forming process.     

石墨电极高温抗氧化技术研究现状

概述石墨电极抗氧化技术的研究现状，重点介绍选择抗氧化涂层体系的要求及涂层制备方法，包括包埋浸渗法、化学气相沉积法、等离子喷涂法及溶胶--凝胶法．展望了石墨电极材料高温抗氧化涂层研究的方向．