La对ZA27合金组织,机械性能及摩擦磨损特性的影响

研究了Ｌａ对ＺＡ２７合金组织、常温机械性能的影响，并测定了ＺＡ２７（Ｌａ）合金的摩擦磨损特性。结果表明：Ｌａ可以细化合金初生ａ′相，改善共晶相的形貌与分布，提高合金的塑性和韧性指标；ＺＡ２７（Ｌａ）合金的摩擦磨损特性优于ＺＱＳｎ６－６－３     

Effects of molten aluminum on H13 dies and coatings

The effects of molten aluminum casting alloy A390 on a commercially heat treated H13 die steel and two wear-resistant coatings, Cr₂₃C₆ and TiN, were investigated by an accelerated corrosion test. The H13 steel suffered severe corrosion due to the rapid formation of intermetallic compounds. The formation of multilayer intermetallic compounds and the simultaneous dissociation of the intermetallic compound τ6 (Al₄FeSi) were attributed to the fast dissolution of H13 steels into the melt. This dissolution of the H13 steel was accelerated dramatically by turbulence and an increase in melt temperature. Significant improvement in corrosion resistance was achieved for the H13 steel coated by Cr₂₃C₆ via a pack cementation process.     

稀土硅铁对TBCs梯度热障涂层组织与性能影响的研究

通过低压等离子喷涂技术在Ni基合金表面制备了Y2O3－CeO2-TZP/NiCoCrAlY梯度热障涂层，采用光学显微镜、X射线衍射仪、扫描电镜、电子探针等方法研究了稀土硅铁对Y2O3－CeO2-TZP/NiCoCrAlY梯度热障涂层的组织和性能的影响。结果表明，在涂层中加入适量的稀土硅铁，能改善涂层的组织结构，提高其抗热震性能和抗高温氧化性能。     

耐磨钢铁件的市场与生产

国内已经形成了耐磨钢铁件产业.目前国内耐磨钢铁件市场约200万t,其中磨球约110万t,衬板约22万t,预计耐磨件市场还将稳中有升.已经产业化的耐磨钢铁材料有5大类、100余个牌号,多品种小批量是耐磨件行业特点.单品种规模化与多品种专业化生产是适合国情的两种企业模式.调整产品结构、加强产品和技术开发以及尽快进入国际市场是国内耐磨件企业发展的方向.     

Effect of heat treatment on thermal stability of Ti40 alloy

Five new heat treatment processes were designed, which were divided into three groups by their characteristics. The microstructures and mechanical properties of the alloy after the five heat treatments and thermal exposure at 500, 550℃ for 100 h were tested. The results indicate that a little differences exist in the performance of mechanical properties at room-temperature after the five heat treatments, and the thermal stability is the key factor for determining heat treatment process. Among the three groups of heat treatment processes, the best thermal stability is achieved after the first group of heat treatment. After annealing treatment at intermediate temperature, some defects and uneven grain boundaries are remained, which leads to the reduction fractions of precipitations on unit grain boundary and the harmful effect of precipitations on grain boundary is weakened. The process of annealing at 650 ℃for 4 h is recommended the best heat treatment process for Ti40 alloy.     

铸造金属耐磨材料研究的进展

详细介绍了耐磨材料奥氏体锰钢、低合金钢和白口铸铁的成分、组织、性能及其应用进展,还对耐磨钢结材料和耐磨铸造复合材料以及新开发的高硼铸造耐磨合金进行了评述,期待为科学选择耐磨材料提供参考。     

火力发电锅炉用高铬铁素体钢焊接材料

为了降低危害环境气体的排放量，一种观点认为这可以通过提高蒸汽状态来解决，并由此开发出了火力发电锅炉用高Cr铁素体耐热钢。为使这种高Cr铁素体耐热钢得到应用，选取合适的焊接材料是非常必要的。对火力发电锅炉用高Cr铁素体耐热钢焊接材料及其近来趋势做了概述。     

高强度耐候钢焊接性分析与研究

通过对高强度耐候钢焊接性分析，采用与之匹配的焊接材料，对高强度耐候钢与不同钢种间焊接接头进行低温抗裂性、力学性能、耐大气腐蚀性能和焊接工艺性等进行试验，并对焊接接头金相组织进行分析，提出了高强度耐候钢焊接工艺及适宜的焊接材料。     

高Si/C值在低铬耐热铸铁阀体上的应用

提高低铬耐热铸铁化学成份中的Si/C值 ,在稳定获得较高强度的同时降低了铸铁的残余应力 ,提高了强度 /应力比 ,具有较强的抗裂纹能力有效防止了矩形阀体的裂纹。分析了Si对提高铸铁耐高温性能的良好效果 ,增加Si量可适当的提高含铬量。     

无铬及含铬电镀锌耐指纹钢板的性能对比研究

为满足环保需求,宝钢冷轧厂在国内率先成功实现了电镀锌无铬耐指纹薄板的产品稳定化生产.首先简要介绍了宝钢电镀锌耐指纹有机膜钢板的生产状况、主要用途.为了解产品性能,采用多种实验方法重点研究了宝钢新型无铬耐指纹钢板的特性,并与原有含铬产品进行了对比.结果表明,宝钢无铬耐指纹有机膜产品各项性能与原含铬产品性能基本相当,满足用户的使用需求.