盾构穿越沉降敏感区段的沉降监测及分析

在盾构穿越复合地层沉降敏感区段时,对该区段的施工沉降进行了严密观测,并对监测数据进行了全面分析,总结出上软下硬复合地层的沉降变形的一般规律.在工程实施中采取有针对性的沉降控制措施,确保敏感区段的沉降控制在允许范围之内.     

浅埋暗挖地铁车站管棚的数值模拟及其加固效果分析

以北京地铁十号线黄庄站126 m超前大管棚一次性施作作为研究背景,在对管棚作用效果和作用机理分析的基础上,比较了现有管棚计算模型的优劣,提出了在数值计算中采用桩单元模拟管棚的思路;对车站导洞施工过程中管棚变形的动态过程以及管棚注浆和管棚直径对地表沉降的控制效果进行了分析研究.监测数据表明:北京地铁十号线黄庄站管棚施作后,四导洞开挖完成后地表沉降控制在30 mm左右,与四号线黄庄站四导洞完成后地表80 mm的沉降值相比大大减小,起到了良好的控制作用.     

兆瓦级风电球铁件低温冲击韧性的影响因素

为了获得具有良好低温冲击性能的兆瓦级风电球铁铸件,对实际生产中的附铸试件-20℃ V型缺口冲击性能进行了测试,并对其成分、基体组织、石墨球大小及分布情况进行分析,研究了兆瓦级风力发电机组球铁件低温冲击韧性影响因素.结果表明：在低P、S的前提下,通过合理的熔炼工艺控制,终Si量在2.3%时可以使单位面积的石墨球数量增加,石墨球细小,低温冲击值最佳;Mn在0.2%~0.3%之间变化时对低温冲击韧性影响并不明显;基体组织中珠光体在5%以下时,低温冲击值无明显变化,珠光体大于12.5%时,低温冲击值急剧下降.     

隧道埋深及开挖方法对于二衬支护时机的影响

为了研究隧道埋深和施工方法对二衬支护时机的影响,以广梧高速公路牛车顶隧道为工程背景,建立数值计算模型,分别改变隧道埋深和施工方法,得到相应的隧道二衬支护时机.结果表明：通过数值计算,可定量得到二衬及掌子面之间的允许距离和埋深的关系;当埋深较小时,二衬与掌子面的允许距离随着埋深的增加而增加;当埋深超过某一限值时,隧道二衬与掌子面的允许距离基本不变;开挖工法对二衬与掌子面间的允许距离影响比较显著,而对仰拱与掌子面的允许距离影响很小.随着开挖断面分部的增加,开挖对围岩的扰动减小,因而可以适当延缓构筑二衬时机.若选取Ⅲ级围岩中的全断面开挖法作为参考基准,则围岩中二衬与掌子面的允许距离将由于选择不同工法需进行修正,相应的修正值为：全断面法1.0,上下台阶法和中隔壁法均为1.5.     

Numerical study on the restriction speed of train passing curved rail in cross wind

The results of numerical investigations of aerodynamic forces and moment coefficients of flow passing a simplified train geometry under different wind speeds are summarized. To compute numerically the different coefficients, the three-dimensional Reynolds-Averaged Navier-Stokes (RANS) equations, combined with the k-ε turbulence model, were solved using finite volume technique. The pres-sure-velocity fields were coupled using the SIMPLE algorithm. At each iteration the pressure correction was obtained by sol...     

考虑风力发电的电力系统小干扰稳定性分析

建立了适合小干扰稳定分析的风力发电机组的数学模型,用于研究含风电电力系统的小干扰稳定性,推导了考虑同步发电机励磁调节系统动态行为的全系统状态矩阵公式。利用特征值分析法,分析系统的小干扰稳定性。通过算例分析,表明风电场接入系统时,对系统中同步发电机强相关振荡模式的频率影响不大,但当风电出力增加时,相关振荡模式的阻尼增强,有利于系统小干扰稳定性。风电场接入受电端区域时,区域间振荡模式阻尼特性相对差一些,更容易发生振荡。     

副井提升系统安全回路及上位机优化改造

针对煤矿副井提升系统安全回路软硬件及上位机中存在的不足进行了优化改造,改进了过卷试验方式,将闸系统紧停信号引入安全回路,并将安全回路各节点状态信号引入RSView32人机界面,实时显示安全回路状态;根据现场检修需要,在上位机增加了复位显示功能及行程偏差大报警信号。实际应用表明,该优化改造可迅速定位故障节点,实现软硬件互查。     

Characterization of Pheromone Blend for Grapevine Moth, Lobesia botrana by Using Flight Track Recording

The behavioral responses of Lobesia botrana males to calling females, pheromone gland extracts, and synthetic sex pheromones were recorded in a wind tunnel. Gland extracts and synthetic pheromones were released from a pheromone evaporator. The numbers of males reaching the source and their flight tracks in response to calling females and pheromone gland extracts were compared to those of synthetic blends. Upwind flights to natural sex pheromone were straighter and faster than to a three-component blend of (E)-7,(Z)-9-dodecadienyl acetate (E7,Z9–12:Ac), (E)-7,(Z)-9-dodecadien-1-ol (E7,Z9–12:OH), and (Z)-9-docecenyl acetate (Z9–12:Ac) (100:20:5). The optimum ratio of E7,Z9–12:OH and Z9–12:Ac to E7,Z9–12:Ac was found to be 5% and 1%, respectively. An additional seven compounds identified in the sex pheromone gland were investigated for their biological activity. Two unsaturated acetates, i.e., (E)-9-dodecenyl acetate (E9–12:Ac) and 11-dodecenyl acetate (11–12:Ac), increased the number of males reaching the source as well as straightness, linear velocity, and decreased the track angle of upwind flight. Optimum response was obtained by releasing 10 pg/min E7,Z9–12:Ac in a mixture with 0.5 pg/min E7,Z9–12:OH, 0.1 pg/min Z9–12:Ac, 0.1 pg/min E9– 12:Ac and 1 pg/min 11-12–Ac. The saturated acetates previously identified in the female glands were biologically inactive.     

The impact of CCT on driving safety in the normal and accident situation: A VR-based experimental study

Correlated color temperature (CCT) of the light source inside the road tunnel plays a crucial role in ensuring driving safety, which is demonstrated by previous studies that CCT influences not only visual effects but also non-visual effects. Although conventional laboratory experiments could simulate the CCT environment inside the tunnel to some extent, they fail to restore driving experience, let alone simulate driving behavior in the accident situation. It has largely remained unclear whether and how CCT would influence visual/non-visual performance of the subjects who are performing driving tasks, especially in the accident situation. Motivated by this gap, a virtual-reality-based framework for assessing the influence of CCT on the visual and non/visual performance in normal driving situation and in accident situation was proposed. In this study, tunnel models under seven different CCTs were created and a rear-end accident was designed in the tunnel. By integrating analog driving equipment, all participants were required to perform virtual driving tasks both in the normal situation and in the accident situation. The non-visual performance (driving fatigue) and the visual performance (reaction time) of the participants were collected and analyzed. Results show that the CCT of light source inside the tunnel was significant on the driving fatigue of the driver who was performing driving task, and it also had a significant impact on the visual performance when the driver was faced with a rear-end accident. Detailed experimental methodology, behavioral explanations underlying these findings, validity of results and practical implications are also discussed in the paper.     

新型风力/洋流涡轮气动及引射特性

为高效开发利用低品位风能和洋流能,采用涡扇发动机喷管引射技术,设计含有单级涡轮和波瓣引射器结构的低品位风力/洋流涡轮,给出一种波瓣引射器的参数化方法,并基于CFX软件RANS方程和k-ε湍流模型数值研究涡轮气动和引射特性.结果表明:含单级涡轮和波瓣引射器结构的低品位风力/洋流涡轮可将其转子四周流过的能量通过波瓣引射器引入涡轮后侧,通过流向涡和正交涡共同产生的抽吸作用,降低涡轮转子后侧被压,使有效做功速度增大约1.4倍,等效于提升了能量的品位.在2~6 m/s的风能和2~4 m/s的洋流能利用方面,含单级涡轮和波瓣引射器结构的风力/洋流涡轮功率曲线与来流速度成指数增长,流通能力增大32.70%~35.33%,在低速工况能量利用率可达66%~77%.