带有光放大的波分复用技术在光纤通信中的应用

本文论述了波分复用技术的优点及其应用；介绍了波分复用技术与光纤放大器相结合后的发展概况２；评述了波分复用技术发展中的主要问题及其在当前实用系统中的解决方案和今后的发展方向。     

不连续增强镁基复合材料的界面行为

综述了近年来国内外关于Ａｌ２Ｏ３短纤维、ＳｉＣ晶须、ＳｉＣ颗粒、Ｂ４Ｃ颗粒增强镁基复合材料的界面结构及其对复合材料性能影响的研究进展，并对今后的研究提出了一些看法。     

布喇格光纤光栅反射特性及制作的理论研究

在对光纤光栅折射率分布进行合理假设的基础上,运用耦合模理论计算了光纤光栅的反射特性,对其反射特性与相关参数的关系进行了分析,并且还推导出了用相位掩模法制造光纤光栅的理论根据,得到了一些有益于光纤光栅制造的结论和有用公式。     

长途传输波分复用系统的设计

随着波分复用（WDM）技术的广泛应用，在工程调测和系统的运行过程中出现了由于系统的适应能力较差和灵活性不够而引起系统优化时间过长的问题，给运营商带来了许多不便，同时，WDM已经由一般的长途应用向超长距离传输和城域网方面发展，适应性和灵活性成为WDM系统网络应用的主要要求，本文将介绍WDM系统的关键技术，重点论述WDM网络设计的一些原则，最后提出WDM系统设计的注意事项。     

分离有机/有机混合物的PVA、CA系列膜及其渗透汽化性能研究(Ⅱ) 成膜条件对渗透汽化性能的影响

用溶剂完全蒸发法制备了PVA复合膜 .经对MTBE/MeOH混合物的分离实验得到了PVA复合膜的最佳成膜条件 ,即 :铸膜液中PVA、马来酸浓度分别为 7%、3% ,热处理温度130～ 15 0℃ .在 1%～ 2 %丙酮水溶液中浸泡处理 4～ 8h ,CTA中空纤维RO膜被改性成渗透汽化膜 .CTA中空纤维膜的分离性能优于其它醋酸纤维素系列膜 ,PVA/CA复合膜的性能优于PVA/PAN复合膜和CA/PAN复合膜     

氩离子激光掺铒光纤的双稳态

分析了掺铒光纤双稳态（ＥＤＦＯＢ）的工作原理、工作条件和特性，并利用氩离子激光（５１４．５ｎｍ）实现了ＥＤＦＯＢ的低功率（＜１０ｍＷ）运转。实验与理论结果基本相符。     

SiCf/O′-SiAlON composite: properties and oxidation retained properties

A composite of O′SiAlON (Si_2-xAl_xN_2-xO_1+x, with x 0.14) reinforced with 20 vol.% SiC monofilaments was fabricated by hot-pressing, at 1600°C, for 2 h under 34 MPa pressure. The mechanical and interfacial properties of the composites, as-fabricated as well as post-oxidized, were, investigated. The composite exhibited a significant improvement in ultimate flexure strength (640 MPa) and work of fracture (42 kJ m⁻²) compared with that (350 MPa and 1.8 kJ m⁻², respectively) of the monolithic material. These mechanical properties were slightly increased after the composite was heat treated for 24 h in air at 1200 and 1300°C. However, the composite exhibited a significant degradation in ultimate strength, while the work of fracture (WOF) remained unchanged after exposure in air at temperatures beyond 1400°C. The as-fabricated composite revealed a low interfacial shear strength (6.2 MPa) and a frictional sliding stress (3.2 MPa). After the composite was oxidized at elevated temperatures, the interfacial bonding and sliding stresses were reduced to noticeable extents, resulting from the degradation of the carbon coating layer of the SiC monofilaments.     

光纤温度传感器综述

本文阐述了温度传感器的概况和使用要求，详细地论述了目前国外各类光纤温度传感器的原理、结构、特点、技术水平和发展状况。     

Silicon doped carbon/Cu joints based on amorphous alloy brazing for first wall application

Amorphous ribbon-type filler-metals represent a promising selection for joining heterogeneous materials together. In this work, rapidly solidified ribbon-type Ti based amorphous filler with a melting temperature of 850 °C and a thickness up to 20 μm is used to join silicon doped carbon to pure copper. SEM examinations demonstrate that a high quality brazed joints could be acquired. The brazed seam has a uniform structure and pore free along its entire length. TiC and ZrC are formed near the interface of carbon and filler-metal when the brazing holds enough time. Using very thin Mo and Cu foil (0.2 mm in thickness) as multiple interlayer are very effective to mitigate the thermal stress occurred in the interface between carbon and copper. The shear strength of this carbon-multiple interlayer-copper joint is more than 20 MPa, and the rupture is mainly occurred on the carbon side.     

甲壳素纤维/毛/绒双层织物的设计

通过分析甲壳素纤维各项性能,将其引入山羊绒产品中,对双层织物的设计进行探讨,并经过纺纱和织物试制,提出了设计与生产中应注意的问题,开发出了具有永久抗菌性的表层为羊绒、里层为甲壳素与改性羊毛混纺的系列产品.