Effects of Trace Zinc on Toughening and Strengthening of Steels

ＥｆｅｃｔｓｏｆＴｒａｃｅＺｉｎｃｏｎＴｏｕｇｈｅｎｉｎｇａｎｄＳｔｒｅｎｇｔｈｅｎｉｎｇｏｆＳｔｅｅｌｓＳｈｉＣｈｏｎｇｚｈｅ①ＡＢＳＴＲＡＣＴＩｍｐａｃｔｂｅｎｄａｎｄｓｔａｔｉｃｔｅｎｓｉｌｅｃｏｍｐａｒｉｓｏｎｔｅｓｔｓａｒｅｃａｒｒｉｅｄｏ...     

Production and properties of micro‐porous glas bubble zinc and aluminium composites

Micro‐porous syntactic foams were produced by means of integration of glass bubbles into aluminium and zinc matrices. Preforms of glass bubbles were pressure infiltrated with the alloys AlSi9Cu9 ans ZnAl4Cu using squeeze casting. The preforms were sintered thermically without the use of bonding agents. Using the combination of different sintering steps syntactic foams with locally different densities could be produced. The mechanical properties of the foams were tested indicating a high compression strength of the foams and a very good compression energy absorption. Furthermore, corrosion behaviour and behaviour at higher temperatures were investigated.     

硫化钠在黑白钨加温精选中的应用研究

介绍了柿竹园黑白钨混合粗精矿加温精选中 ,添加硫化钠与水玻璃混合剂比单一添加水玻璃能更有效地使白钨矿与萤石等含钙矿物及脉石矿物分离。论述了硫化钠在加温精选中的作用效果并探讨了其作用机理     

Vinyl acetate monomer—a pilot plant study

The kinetics of the reaction of acetic acid and acetylene over zinc acetate-activated carbon catalyst was investigated over a wide range of process variables in a pilot reactor. Although various catalytic reaction mechanisms were postulated, the rate of reaction was most satisfactorily correlated by a mechanism of surface reaction between charged adsorbed acetic acid and acetylene, which assumes that the rate controlling step was the irreversible charged adsorption of acetylene and acetic acid.     

Hysys软件在分析精丙烯硫化物来源中的应用

气体分馏装置原料液化石油气 (LPG)中有机硫化物形态复杂 ,考察分析工业装置精丙烯硫化物含量变化难度大。利用Hysys模拟 ,分析判断LPG中小分子有机硫化物在气体分馏产品的分布并提出了控制措施。考虑操作条件对精丙烯硫含量的影响 ,并对工业装置精丙烯总硫超标原因进行了分析。     

低碳钢热浸Zn-0.15%Ni合金镀层组织及第二相粒子

采用热浸Zn-Ni合金镀锌方法，在含0.03%-0.36%Si的低碳钢上获得Zn-Ni合金镀层，研究了镀浴中Ni含量和钢中Si含量对镀层中δ相和ζ相生长速率的影响，以及Zn-Ni合金镀层η相中的第二相粒子即Zn-Fe-Ni三元化合物Γ2相粒子的形成和长大过程，结果表明，在Zn-0.15%Ni镀浴中，含硅0.03%-0.215%钢镀层的ζ相明显受到抑制，δ相厚度略有增加，Γ2相粒子的形成和长大过程包括ζ相的溶解，Γ2相的形核和成比例吸收铁，镍而长大。     

镀锌层银盐黑色钝化工艺

在含ＡｇＮＯ３０．５～１ｇ／Ｌ，ＣｒＯ３５～１０ｇ／Ｌ，Ｈ２ＳＯ４０．５～１ｍｌ／Ｌ，光泽控制剂１０～２５ｍＬ／Ｌ的钝化液中处理镀锌层，可获得结合力良好、光亮的黑色钝化膜。     

换热器防腐蚀方法介绍

文章对换热器的不同保护方法进行了介绍 ,重点讨论了渗铝、渗锌两种方法。在室温～ 80℃自来水和 3.5 %NaCl水溶液中 ,与碳钢基体相比 ,渗铝层的电位发生了反转 ,因而在针孔部位会形成大阴极小阳极的局面 ,易发生点蚀 ;而在相同条件下渗锌层不出现上述点蚀现象 ,更适宜在换热器的应用     

Procedure for Measuring Low Concentrations of H2 and H2S Above a Water Surface

A simple measuring procedure for low concentrations of H₂ and H₂S (at the level of ppm fractions) above the surface of water by using sensitive gas analyzers is suggested. The procedure is easily accomplished in conditions outside the laboratory (under field conditions).     

卤素置换反应用氯化锌催化剂的再生

研究了用于催化卤素置换反应后的氯化锌催化剂的再生方法。其过程包括：用石灰乳中和，沉淀出氢氧化锌，用氢氧化锌中和氯化锌废液至pH值为5—6，通入氯气氧化氯化锌废液中的有机物，蒸发至必要的浓度。