电子束辐照对尼龙66纤维结构和力学性能的影响

研究了室温空气条件下电子束辐照剂量(范围0~1000 k Gy)对尼龙66纤维结构和力学性能的影响。利用广角X射线衍射仪、差示扫描量热仪、扫描电镜以及YG065型织物强力仪等测试方法研究了不同辐照剂量尼龙66的特性黏数、晶型结构、取向度、结晶和熔融行为,以及表面形貌和力学性能。研究结果表明,在设置的辐照剂量范围内,随着剂量的增加,纤维原有的晶型结构不变,但是,伴随辐照诱导非晶区分子链的重排,纤维的结晶度提高,取向有所改善,而结晶和熔融温度向低温偏移,熔融峰出现宽化。说明辐照主要导致尼龙66分子链氧化降解,降低其热稳定性,在电子束的撞击下,纤维表面产生了微裂纹,增加了应力集中,破坏了纤维的力学性能。     

微波辐照聚合物及其复合材料应用的研究进展

介绍了微波辐照作用机理,综述了近年来聚合物及其复合材料的微波固化研究进展,着重讨论了环氧树脂及其复合材料微波固化与热固化作用的对比、影响微波固化速率的因素以及微波固化对材料结构、性能的影响,简要介绍了其他聚合物及其复合材料的微波辐照固化研究,最后探讨了微波辐照技术未来的发展趋势。     

EVA-g-GMA的制备及其对PLA/PHBV共混物性能的影响

通过熔融聚合法先制备了乙烯-醋酸乙烯酯接枝甲基丙烯酸缩水甘油酯(EVA-gGMA),采用红外光谱仪和核磁共振对EVA-g-GMA的结构进行了表征。然后将不同质量分数的EVA-g-GMA加入到聚乳酸/聚(3-羟基丁酸酯-co-3-羟基戊酸酯)(PLA/PHBV)共混物中,对共混物的性能进行研究。结果表明:GMA成功接枝到EVA上,随着EVA-g-GMA加入量的增加,PHBV与PLA的Tg升高,结晶度逐渐下降;分散相在PLA基体中的分散逐渐均匀,粒径减小,相界面渐渐模糊;在EVA-g-GMA加入后,共混物粘度升高,断裂伸长率和冲击强度分别可达290.9%和43.5KJ·m-2,三元共混物的水蒸气阻隔性相对于PLA/PHBV略有下降。综合考虑各种因素,EVA-g-GMA的加入使得PLA/PHBV的整体性能得到极大改善。     

Detwinning through migration of twin boundaries in nanotwinned Cu films under in situ ion irradiation

The mechanism of radiation-induced detwinning is different from that of deformation detwinning as the former is dominated by supersaturated radiation-induced defects while the latter is usually triggered by global stress. In situ Kr ion irradiation was performed to study the detwinning mechanism of nanotwinned Cu films with various twin thicknesses. Two types of incoherent twin boundaries (ITBs), so-called fixed ITBs and free ITBs, are characterized based on their structural features, and the difference in their migration behavior is investigated. It is observed that detwinning during radiation is attributed to the frequent migration of free ITBs, while the migration of fixed ITBs is absent. Statistics shows that the migration distance of free ITBs is thickness and dose dependent. Potential migration mechanisms are discussed.     

Nanoscale Lacing by Electrons

The ability to harness the optical or electrical properties of nanoscale particles depends on their assembly in terms of size and spatial characteristics which remains challenging due to lack of size focusing. Electrons provide a clean and focusing agent to initiate the assembly of nanoclusters or nanoparticles. Here an intriguing route is demonstrated to lace gold nanoclusters and nanoparticles in string assembly through electron‐initiated nucleation and aggregative growth of Au(I)‐thiolate motifs on a thin film substrate. This size‐focused assembly is demonstrated by controlling the electron dose under transmission electron microscopic imaging conditions. The Au(I)‐thiolate motifs, in combination with the molecularly mediated alignment, facilitate the interstring electrostatic and intrastring aurophilic interactions, which functions as a molecular template to aid electron‐initiated 1D lacing. The findings demonstrate a hierarchical route for the 1D assemblies with size and spatial tunable catalytic, optical, sensing, and diagnostic properties.     

一种求解度约束最小生成树问题的优化算法

为求解大规模结点度约束最小生成树问题,提出一种带有嫁接和剪接算子操作的优化算法.通过借鉴花草果树种植技术,建立一种以基本遗传算子为基础、带有加速和调节算子作为激励的进化计算体系;嫁接以一种贪婪的思想加速搜索,按收益最大化原则进行剪接.对可能陷入局部极值引起冲突的现象及冲突检测的方法进行分析,并提出了冲突的若干解决方法.针对DCMST问题求解中的复杂性,提出了几种有效的嫁接和剪接的策略,并对算法的收敛性和计算复杂度进行了分析.通过该算法对结点数为50~500之间的Euclidean问题和按均匀随机方式产生的non-Euclidean度约束最小生成树问题进行求解.与现有文献的实验结果对比表明,该方法在求解最好解的精度和收敛速度上均有一定的优势.     

Optimum design of electromagnetic shielding rooms with minimum usage of absorbing materials

In this article, a novel method has been proposed to optimize the electromagnetic shielding rooms. This method is based on using minimum electromagnetic absorbing materials on the inner surface of the rooms. The positions of the absorbing materials are found optimally to produce a “best” performance for the shielding rooms. The ray‐tracing method is used to predict the shielding effectiveness (SE) of the electromagnetic shielding rooms with apertures. The performance of the proposed method is verified by a comprehensive example. © 2009 Wiley Periodicals, Inc. Int J RF and Microwave CAE 2010.     

CRT and LCD monitor and process materials evaluated for environmental improvement

Decision rules have been developed and applied to the bills of materials of a color cathode‐ray tube (CRT) and a liquid‐crystal‐display (LCD) desktop monitor to determine which product and process materials will be evaluated in an environmental life‐cycle assessment. Materials of significant mass, of technological importance, and of potential environmental impact are targeted. The list of materials identified are those for which life‐cycle inventory data will be obtained for the materials extraction and materials processing life‐cycle stages of a CRT and an LCD. Additionally, materials identified will also be used to represent life‐cycle impact in terms of resource consumption, as well as surrogates for occupational health impacts.     

工程火警监测的计算机自动处理

阐述了采用红外摄象及计算机自动处理技术,对工程火警进行监测。采用图值,面积、形状智能识别和实时行程编码技术,系统的识别可靠性大为提高。