Direct electroless Ni-P deposition on AM50 magnesium alloy from sulfate bath

A bright electroless Ni-P deposition on AM50 magnesium alloy in a sulfate plating bath was proposed by using direct plating process with non-chromate pretreatment. The electroless Ni-P plating on AM50 magnesium alloy has an admirable appearance and good adhesion. The results indicate that the electroless Ni-P deposition with non-chromate pretreatment has better adhesion than that of zinc immersion coating. Anodic polarization curves indicate that the electroless Ni-P deposition obtained from the sulfate bath has similar corrosion-resistance to that obtained from basic nickel carbonate bath. The deposition process generates less pollutant by a non-chromate plating bath and is suitable for the magnesium alloys manufacture because of its low cost. The hardness of the electroless Ni-P plated AM50 is about HV 720.6 and HV 969.7 after heat treatments at 180℃ for 2 h. The wear resistance of Ni-P plated magnesium alloy specimens is about 5 to 9 times as high as that of bare magnesium alloys.     

38CrMoAl钢异状断口及其锻造裂纹的电镜研究

<正> 我厂碱性平炉冶炼的38CrMoA1钢,在锻造时产生裂纹,其纵向断口是变形能力较差、呈致密而较平坦的灰白色大块岩石形异状断口,使横向机械性能(尤其是δ、φ、α_k值)显著降低。通过对异状断口二次复型进行了大量透射电子显微镜观察,发现异状断口区存在大量非金属夹杂引起沿晶断裂;经选区电子衍射分析,确定其为AIN夹杂。这     

D2与Cr12MoV钢热加工性能的区别

<正> 目前在国际上,认为较好的热作模具钢为美国标准中的H13;而冷作模具钢典型钢号是D2。为了使D2钢在我国广泛的生产和使用,现介绍D2钢与Cr12MoV钢的锻造及热处理性能特点。