立光之美 净化妆容 LUNASOL春季妆容光芒现身

散发三棱镜折射之光——闪光颗粒演绎更光彩化妆效果的关键就是闪光颗粒。通过添加闪光颗粒，产生如穿透三棱镜般的炫目光芒，在唇边、眼触目、指尖营造了生动的立体感。另外，在唇彩中还精心添加了美容液，可以长时间地保持光泽和滋润。     

PNY GeForce 7600GS显卡

1985年．PNY创建于美国，“PNY”的名字取自于英文单词的巴黎和纽约（PARIS and NEW YORK）。这款GeForce 7600GS显卡就是PNY进入中国显卡市场的敲门砖。     

激光粒度仪分析黄河泥沙粒度初步试验

泥沙粒径是进行泥沙研究的重要参数。本次研究选用英国马尔公司生产的激光精度分析仪，对黄河中、下游部分站粗、中、细沙样进行了初步试验分析，分析结果表明：该仪器测定泥沙颗粒级配的准确性，重复性较好；采用超声分散不会破坏泥沙颗粒的原形，测试泥沙粒径范围宽，下限可延伸到纳米级，从而为激光粒度仪在黄河上的应用提供了广阔前景。     

明渠湍流床面附近跃移层面颗粒浓度垂线分布

本文以动理学理论的Boltzmann方程为基础，考虑明渠湍流床面附近猝发喷射和清扫运动对跃移层内运动颗粒的不同作用，分析了明渠中泥沙颗粒浓度垂线分布问题，得到了适用于包括跃移层、悬移层在内的统一浓度垂线分布公式。文中着重研究了跃移层内运动颗粒的浓度垂线分布，并将本文结果与实测跃移层内浓度垂线分布及实测跃移层顶部浓度进行了对比，结果表明理论与实验两者符合较好。     

Electrorheological Fluids Based on Titania Particles Coated with Silica and Their Application in Smart Windows

The electrorheological (ER) fluids are colloidal suspension of highly polarizable particles in a non-conducting solvent.Chains of submicron-sized particles formed along an applied DC electric field by the so-called electrorheological effect.According to the obvious change of transmittance of the ER fluids in a DC electric field when the polarized particles arranged along the field,the model of smart window was proposed by sandwiching the ER fluids based on titania particles coated with silica between a pair of In-Sn oxide (ITO) coated glasses.The solar transmittance change as much as 48.0% was obtained with the wavelength of 500 nm at the maximum on applying and removing the electric field of 500V/mm.     

颗粒橙汁的加工工艺

颗粒橙汁就是橙汁中含有一定量的甜橙汁囊颗粒,这种饮料在日本、美国均有相当的市场,深受消费者欢迎。我国台湾、香港也制造和销售这种水果饮料。颗粒橙汁与一般橙汁不同,各种营养成份含量丰富,含有一定量的汁囊,吃起来有一定的脆度,而且无残渣感,由于带有汁囊皮,又能为人体提供部份半纤维素和纤维素。因而颗粒橙汁是一种较高档的营养型饮料。我市盛产柑橙桔,有条件生产这种颗粒的柑桔橙汁之类的饮料。其加工工艺流程大致为:     

颗粒活性炭在饮用水深度处理中的应用

概括介绍了国内外活性炭水处理的发展和应用情况、活性炭深度处理的机理及处理效果。针对当前水源有机污染现状和发展趋势 ,论述了采用活性炭进行饮用水深度处理的必要性 ,给出了颗粒活性炭吸附池设计的参数及要求。最后介绍了北京市城子水厂炭吸附池设计及特点。     

喷射造型机射砂过程数值模拟研究

本文应用颗粒动力学方法，对型砂的喷射过程进行数值模拟，并对喷射筒结构进行实验计算，计算结果可以解释原始设计的缺陷，据此改进了喷射筒性能。     

Influence of melt superheat on breakup process of close-coupled gas atomization

In close-coupled gas atomization（CCGA）, the influences of melt superheat on breakup process are fundamental to obtain desired or finer powder. Based on a series of Cu atomization experiment under different superheating conditions, the influences of melt superheat on breakup process were studied. Experimental results indicate that as the melt superheat is increased to 150, 200, 250 and 300 K, the mean particle size （D50） decreases consequently to 34.9, 32.3, 30.9 and 19.7 μm. Theoretical analysis reveals that the primary breakup and secondary breakup processes are close coupled, and the melt superheat radically influences the melt properties, and plays a crucial role on governing the filming process of primary breakup and the atomization modes of secondary breakup. There exists a strong nonlinear decrease of contact angle of melt to nozzle orifice wall when the superheat is increased fi＇om 250 K to 300 K, leading to a marked fall of the film thickness formed in primary breakup, and D50 of copper powders is therefore sharply reduced. However, the log-normal distribution feature of particle size has not been substantially improved.