新型镍基粉末高温合金动态再结晶的数学模型

采用Gleeble 15 0 0热模拟试验机对新型镍基粉末高温合金在 10 70℃～ 1170℃ ,应变速率为 5× 10 - 4s- 1～2× 10 - 1s- 1的条件下进行了轴向压缩试验。通过加工硬化率和应变的关系曲线确定稳态应变εs,并绘制了该合金的动态再结晶图。结果表明 ,Zener Hollomon参数变化对动态再结晶的临界应变量影响较小 ,对稳态应变量影响较大 ,并建立了该合金的动态再结晶动力学模型和晶粒尺寸模型     

16MnR 容器板性能不合格的原因

运用扫描电镜、金相检验和力学检验对不合格的16MnR容器板进行了检验分析。结果表明，材料中的条状MnS夹杂物和少量的马氏体、贝氏体组织是导致钢板延伸、冲击性能不合格的主要原因。     

化学镀钴-磷基多元合金的研究现状

由于钴－磷基合金膜具有优异的磁性能和较高的耐蚀性，能有效的用于数字存储装置，已引起人们的极大关注。     

镁合金及其复合材料超塑性的研究现状

以等通道角挤压和粉末冶金等方法为例，讨论了镁合金晶粒细化的处理工艺。在室温下晶粒细化可使镁合金同时具有较高的强度和韧性，而在较高的应变速率或较低的温度下，晶粒细化的镁合金具有一定的超塑性，这说明晶粒细化对改善镁合金的力学性能十分重要。镁合金超塑性变形的主要机制仍然是晶界滑移，但晶界滑移总会在晶界三叉区或材料增强相与基体的相界处产生应力集中，使晶界滑移受到阻碍，这就需要有另外的协调机制来协调晶界进一步滑移。镁合金在超塑性变形过程中更容易发生动态再结晶使晶粒细化，使晶界滑移能够继续进行。镁基复合材料中增强体颗粒很细小且弥散分布，稳定了镁合金在高温下的组织，颗粒与晶粒界面可以充当原子扩散通道，很好地协调了晶界滑移。     

Carbon segregation and inclusions effects on surface fracture morphology of a 12% chromium stainless steel

Martensitic 12% chromium stainless steel is generally used for the manufacture of water vapour turbine blades. This material, under these environmental conditions, develops fatigue corrosion with failure as a result of the segregation of certain constituent elements such as phosphorus (P) and sulphur (S),^[1–3] or the presence of some types of inclusions.^[2–4] To be able to understand and explain these phenomena, in situ characterization of the fractured surfaces were performed for two types of samples: steel 1 as manufactured turbine material whose fracture mode is intergranular and steel 2 issued from last stage turbine blades after 100 000 h service at 40 °C whose fracture mode is transgranular. The techniques used for characterization were scanning electron microscopy (SEM) coupled with the x-ray analysis by energy dispersive spectroscopy (EDS), and auger electron spectroscopy (AES). The Auger results enabled the understanding of the brittle to ductile transition for the material by showing the simultaneous diffusion of carbon from grain boundaries (GB) to grains (G) and chromium from G to GB. Furthermore, the heavy segregation of phosphorus at the GBs could explain the intergranular crack rupture traces observed in steel 2. SEM observations coupled with EDS analysis showed the presence of different types of non-metallic inclusions such as silicon-based complex inclusions and manganese sulfides (MnS). The presence of silicon-based complex inclusions at GB could explain the intergranular fracture mode previously reported. The characterization of the fracture appearance suggests also that MnS inclusions can act as nucleation sites for secondary microcracks at the GB level that were observed after service.     

Flow stress and softening behavior of wrought magnesium alloy AZ31B at elevated temperature

1　INTRODUCTIONThewroughtmagnesiumalloyshaveexcellentspecificstrengthandstiffness ,machinability ,dampcapacity ,dimensionalstability ,lowmeltingcostsandare ,hence ,veryattractiveinsuchapplicationsasau tomobile ,aviation ,electronicandcommunicationin dustry[16 ] .Investigationsontheflowstressandsofteningbehaviorofmagnesiumalloysathigherformingtem peratureandstrainratehavebeenanimportantsub jectinwroughtmagnesiumalloysforming[710 ] .InthispapertheflowstressandsofteningbehaviorofAZ31Bdeform…     

Effects of can parameters on canned—forging process of TiAl base alloy（Ⅱ）——Mechanical behavior

1　ＩＮＴＲＯＤＵＣＴＩＯＮＴｉＡｌａｌｌｏｙｈａｓｌｏｎｇｂｅｅｎｃｏｎｓｉｄｅｒｅｄａｓａｐｒｏｍｉｓ ｉｎｇｍａｔｅｒｉａｌｆｏｒｈｉｇｈｔｅｍｐｅｒａｔｕｒｅａｐｐｌｉｃａｔｉｏｎ ,ｄｕｅｔｏｉｔｓｅｘｃｅｌｌｅｎｔｈｉｇｈｔｅｍｐｅｒａｔｕｒｅ ｐ     

热处理对Ti-Al-Sn-Zr-Mo-Si-X系合金性能的影响

研究了热处理对3种Ti-Al-Sn-zr-Mo-Si-X（X为ⅤB，ⅥB族一种或几种元素）系合金（A、B、C）室温拉伸性能的影响，对优化合金的热处理制度及优选热处理制度下3种合金的疲劳裂纹扩展行为也进行了探讨。结果表明，优选热处理制度下A、C合金的裂纹扩展速率差别不大，B合金560℃时效处理后，裂纹扩展速率比540℃时效处理的小。在相同热处理制度下，比较3种合金裂纹扩展速率的结果表明，IgΔK在1．2～1．5范围内B合金的抗疲劳裂纹扩展性能较优。     

回火处理对Fe-Mn基合金剪切模量的影响SCIEI

研究了回火温度和时间对两种成分Fe-Mn基合金剪切模量的影响。结果指出,附加Cr,Ti的合金在回火状态下ΔG G-T曲线有极小和极大两个极值,而附加Cr,Ni,W,C的合金只呈现极大值特征。这是由于Ni,W,C降低反铁磁转变点T_N造成的, 随着回火温度升高或回火时间增加,ΔG_λ效应逐渐增加。     

埋弧自动焊在大口径钢卷管焊接上的应用

为把埋弧焊应用在大口径钢卷管焊接上,分析了焊接工艺设计、焊接工装设计和纵缝、环缝焊接的施工要点,经过实际施工验证了这种方法是成功的,效益是高的。