Simulation study on the gasification process of Ningdong coal with iron-based oxygen carrier

Chemical looping gasification (CLG) of Ningdong coal by using Fe₂O₃ as the oxygen carriers (OCs) was studied, and the gasification characteristics were obtained. A computation fluid dynamics (CFD) model based on Eulerian‐-Lagrangian multiphase framework was established, and a numerical simulation the coal chemical looping gasification processes in fuel reactor (FR) was investigated. In addition, the heterogeneous reactions, homogeneous reactions and Fe₂O₃ oxygen carriers' reduction reactions were considered in the gasification process. The characteristics of gas flow and gasification in the FR were analyzed and it was found that the experiment results were consistent with the simulation values. The results show that when the O/C mole rate was 0.5:1, the gasification temperature was 900 ℃ and the water vapor volume flow rate was 2.2 ml·min^-1, the mole fraction of syngas reached a maximum value of the experimental result and simulation value were 71.5% and 70.2%, respectively. When the O/C mole rate was 0.5:1, the gasification temperature was 900 ℃, and the water vapor volume flow was 1.8 ml·min^-1; the gasification efficiency reached the maximum value was 62.2%, and the maximum carbon conversion rate was 84.0%.     

Corrosion inhibition of carbon steel in hydrochloric acid by cationic arylthiophenes as new eco-friendly inhibitors: Experimental and quantum chemical study

This study describes the adsorption behavior of three arylthiophene derivatives namely: 2-(4-amidino-3-fluorophenyl)-5-[4-methoxy phenyl] thiophene dihydrochloride salt (MA-1217), 2-(4-amidinophenyl)-5-[4-chlorophenyl] thiophene dihydrochloride salt (MA-1316) and 2-(4-amidino-3-fluorophenyl)-5-[4-chlorophenyl]thiophene dihydrochloride salt (MA-1312) at C-steel in 1.0 mol·L^-1 HCl interface using experimental and theoretical studies. Electrochemical and mass loss measurements showed that the inhibition efficiency (IE) of the arylthiophene derivatives increases with increasing concentrations and exhibited maximum efficiency 89% at 21×10^-6 mol·L^-1 (MA-1217) by mass loss method. The investigated arylthiophene derivatives obey the Langmuir adsorption isotherm. From polarization studies the arylthiophene derivatives act as mixed-type inhibitors. Surface analysis were carried out and discussed. The mode of orientation and adsorption of inhibitor molecules on C-steel surface was studied using molecular dynamics (MD) simulations. Quantum chemical parameters as well as the radial distribution function indices and binding energies confirm the experimental results.     

3D Prussian blue/Pt decorated carbon nanofibers based screen-printed microchips for the ultrasensitive hydroquinone biosensing

Nowadays,water pollution has become more serious,greatly affecting human life and healthy.Electrochemical biosensor,a novel and rapid detection technique,plays an important role in the real-time and trace detection of water pollutants.However,the stability and sensitivity of electrochemical biosensors remain a great challenge for practical detections in real samples to the strong interferences derived from complex components and coagulation effects.In this work,we reported a novel three-dimensional architecture of Prussian blue nanoparticles (PBNPs)/ Pt nanoparticles (PtNPs) composite film,using 3D interweaved carbon nanofibers as a supporting matrix,for the construction of screen-printed microchips-based biosensor.PtNPs with diameters of～2.5 nm was highly dispersed on the carbon nanofibers (CNFs) to build a 3D skeleton nanostructure through a solvothermal reduction.Subsequently,uniform PBNPs were in-situ self-assembled on this skeleton to construct a 3D architecture of PB/Pt-CNF composite film.Due to the synergistic effects derived from this special feature,the as-prepared hydro-quinone (HQ) biosensor chips can synchronously promote both surface area and conductivity to greatly enhance the electrocatalysis from enzymatic reaction.This biosensor has exhibited a high sensitivity of 220.28 μA·L·mmol-1·cm-2 with an ultrawide linear range from 2.5μmol·L-1 to 1.45 mmol·L-1 at a low potential of 0.15 V,as well as the satisfactory reproducibility and usage stability.Besides,its accuracy was also verified in the assays of real water samples.It is highly expected that the 3D PB/Pt-CNF based screen-printed microchips will have wide applications in dynamic monitoring and early warning of ana-lytes in the various practical fields.     

A panoramic view of Li7P3S11 solid electrolytes synthesis,structural aspects and practical challenges for all-solid-state lithium batteries

The development of an inorganic electrochemical stable solid-state electrolyte is essentially responsible for future state-of-the-art all-solid-state lithium batteries (ASSLBs). Because of their advantages in safety, working temperature, high energy density, and packaging, ASSLBs can develop an ideal energy storage system for modern electric vehicles (EVs). A solid electrolyte (SE) model must have an economical synthesis approach, exhibit electrochemical and chemical stability, high ionic conductivity, and low interfacial resistance. Owing to its highest conductivity of 17 mS·cm^-1, and deformability, the sulfide-based Li₇P₃S₁₁ solid electrolyte is a promising contender for the high-performance bulk type of ASSLBs. Herein, we present a current glimpse of the progress of synthetic procedures, structural aspects, and ionic conductivity improvement strategies. Structural elucidation and mechanistic approaches have been extensively discussed by using various characterization techniques. The chemical stability of Li₇P₃S₁₁ could be enhanced via oxide doping, and hard and soft acid/base (HSAB) concepts are also discussed. The issues to be undertaken for designing the ideal solid electrolytes, interfacial challenges, and high energy density have been discoursed. This review aims to provide a bird's eye view of the recent development of Li₇P₃S₁₁-based solid-state electrolyte applications and explore the strategies for designing new solid electrolytes with a target-oriented approach to enhance the efficiency of high energy density all-solid-state lithium batteries.     

磷酸二苯酯催化的2-吲哚甲烷胺衍生物的合成

以磷酸二苯酯为催化剂,3-甲基吲哚类化合物与亚胺通过Friedel-Crafts加成反应一步合成了具有广泛药理活性的2-吲哚基甲烷胺类化合物,对反应条件进行优化。结果表明,当n(3-甲基吲哚类)∶n(亚胺)∶n(磷酸二苯酯)=1.0∶2.0∶0.1,其中,磷酸二苯酯0.0025 mmol,1 mL无水二氯甲烷作溶剂,室温下反应0.5 h时,即可得到高收率2-吲哚基甲烷胺类衍生物（85%~90%）。产物经 1HNMR、13CNMR 和 HRMS 进行了结构确定。     

金属陶瓷防腐蚀涂层替代镀镉或镉−钛工艺的研究

针对钢制零件采用镀镉、镀镉?钛工艺存在氢脆、镉脆风险及不利于环境保护的现状,研究采用涂覆IPcote9183或IPcote9183+IPseal9184形成金属陶瓷防腐蚀涂层(MCAC)的替代工艺。对比结果表明:上述2种金属陶瓷涂层的氢脆性和耐蚀性优于镉及镉?钛镀层,其他性能相当,能够完全替代它们应用于起落架钢制零件的表面防护。     

采用不同模型预测低碳Fe–Ni合金等离子熔覆层的冲击韧性

采用等离子熔覆法在Mn13高锰钢上制备了低碳Fe-Ni合金层。以熔覆电流、喷头移动速率、离子气流量和热处理温度作为输入参数,以冲击韧性作为输出参数,建立了BP(误差反向传播)神经网络模型和粒子群算法优化(PSO)BP神经网络模型,并跟冲击韧性与热处理温度之间的线性回归模型进行对比。结果表明,线性回归模型、BP神经网络模型和PSO-BP模型的平均相对误差分别为7.06%、6.12%和3.03%。PSO-BP模型的预测结果与实测值的误差较小。     

The Antithrombotic Agent Pterostilbene Interferes with Integrin αIIbβ3-Mediated Inside-Out and Outside-In Signals in Human Platelets

Platelets play a crucial role in the physiology of primary hemostasis and pathological processes such as arterial thrombosis; thus, developing a therapeutic target that prevents platelet activation can reduce arterial thrombosis. Pterostilbene (PTE) has remarkable pharmacological activities, including anticancer and neuroprotection. Few studies have reported the effects of pterostilbene on platelet activation. Thus, we examined the inhibitory mechanisms of pterostilbene in human platelets and its role in vascular thrombosis prevention in mice. At low concentrations (2–8 μM), pterostilbene strongly inhibited collagen-induced platelet aggregation. Furthermore, pterostilbene markedly diminished Lyn, Fyn, and Syk phosphorylation and hydroxyl radical formation stimulated by collagen. Moreover, PTE directly hindered integrin α_IIbβ₃ activation through interfering with PAC-1 binding stimulated by collagen. In addition, pterostilbene affected integrin α_IIbβ₃-mediated outside-in signaling, such as integrin β₃, Src, and FAK phosphorylation, and reduced the number of adherent platelets and the single platelet spreading area on immobilized fibrinogen as well as thrombin-stimulated fibrin clot retraction. Furthermore, pterostilbene substantially prolonged the occlusion time of thrombotic platelet plug formation in mice. This study demonstrated that pterostilbene exhibits a strong activity against platelet activation through the inhibition of integrin α_IIbβ₃-mediated inside-out and outside-in signaling, suggesting that pterostilbene can serve as a therapeutic agent for thromboembolic disorders.     

Evidence for a Negative Correlation between Human Reactive Enamine-Imine Intermediate Deaminase A (RIDA) Activity and Cell Proliferation Rate: Role of Lysine Succinylation of RIDA

Reactive intermediate deaminase (Rid) proteins are enzymes conserved in all domains of life. UK114, a mammalian member of RidA subfamily, has been firstly identified as a component of liver perchloric acid-soluble proteins (L-PSP). Although still poorly defined, several functions have been attributed to the mammalian protein UK114/RIDA, including the reactive intermediate deamination activity. The expression of UK114/RIDA has been observed in some tumors, arousing interest in this protein as an evaluable tumor marker. However, other studies reported a negative correlation between UK114/RIDA expression, tumor differentiation degree and cell proliferation. This work addressed the question of UK114/RIDA expression in human non-tumor HEK293 cell lines and in some human tumor cell lines. Here we reported that human RIDA (hRIDA) was expressed in all the analyzed cell line and subjected to lysine (K-)succinylation. In HEK293, hRIDA K-succinylation was negatively correlated to the cell proliferation rate and was under the control of SIRT5. Moreover, K-succinylation clearly altered hRIDA quantification by immunoblotting, explaining, at least in part, some discrepancies about RIDA expression reported in previous studies. We found that hRIDA was able to deaminate reactive enamine-imine intermediates and that K-succinylation drastically reduced deaminase activity. As predicted by in silico analysis, the observed reduction of deaminase activity has been related to the drastic alterations of hRIDA structure inferred by K-succinylation. The role of hRIDA and the importance of its K-succinylation in cell metabolism, especially in cancer biology, have been discussed.     

Nicotinamide Phosphoribosyltransferase as a Key Molecule of the Aging/Senescence Process

Aging is a phenomenon underlined by complex molecular and biochemical changes that occur over time. One of the metabolites that is gaining strong research interest is nicotinamide adenine dinucleotide, NAD⁺, whose cellular level has been shown to decrease with age in various tissues of model animals and humans. Administration of NAD⁺ precursors, nicotinamide mononucleotide (NMN) and nicotinamide riboside (NR), to supplement NAD⁺ production through the NAD⁺ salvage pathway has been demonstrated to slow down aging processes in mice. Therefore, NAD⁺ is a critical metabolite now understood to mitigate age-related tissue function decline and prevent age-related diseases in aging animals. In human clinical trials, administration of NAD⁺ precursors to the elderly is being used to address systemic age-associated physiological decline. Among NAD⁺ biosynthesis pathways in mammals, the NAD⁺ salvage pathway is the dominant pathway in most of tissues, and NAMPT is the rate limiting enzyme of this pathway. However, only a few activators of NAMPT, which are supposed to increase NAD⁺, have been developed so far. In this review, we will focus on the importance of NAD⁺ and the possible application of an activator of NAMPT to promote successive aging.