一种基于FPGA的高精度同步信号生成设计与实现

针对特定通信系统中需要实现快速、高精度的时间同步需求,设计了一种基于 FPGA 同步信号生成的系统方案。系统以C/A码码片为最小时间刻度,通过对信号中码片数计数输出秒脉冲信号,并在同源情况下,根据码相位累加器溢出后残余值的特点,调整秒脉冲信号的输出位置。结果表明,调整后的秒脉冲信号同步精度能达到纳秒级,在工程上具有一定的应用价值。     

一种门限可追踪的匿名签密方案

为解决匿名签密算法中签密者身份的追踪问题,提出了一种门限可追踪的匿名签密方案.该方案借助范德蒙行列式生成成员的公钥和私钥,通过在匿名签密过程中附加一些与签密者身份相关的额外信息,实现签密者身份的门限追踪.在不可分模型下,证明了该方案满足匿名性、门限可追踪性、不可伪造性和不相关性.     

思想政治理论课教学改革x+1模式探索与思考

高校思想政治理论课理论教学与实践教学的严重脱节,已成为当前高校思想政治理论课教学改革面临的突出问题,严重影响教学效果的有效提升。结合理工科院校思想政治理论课教学实际状况,尝试构建x+1教学新模式,通过重置思想政治理论课教学体系,融课堂实践教学于理论教学过程之中,并辅以社会实践教学,有效提高思想政治理论课教学的针对性和实效性。     

纳米晶Li7Si3合金的制备与性能表征

为研究纳米结构锂电池阳极材料的特性,试制了纳米晶Li-Si合金.采用优化的纳米晶合金块体材料制备工艺,即熔炼制备粗晶Li7Si3合金铸锭、高能球磨得到Li7Si3非晶粉末,结合放电等离子烧结(spark plasma sintering,SPS)制备得到了纳米晶Li7Si3合金,并对其进行了Rietveld结构精修和杨氏模量测定.结果表明:纳米晶Li7Si3单胞结构参数为a=b=0.4452 nm(比粗晶增加0.38%),c=1.8239 nm(比粗晶增加0.58%),单胞体积Vo=0.313 070nm3(比粗晶增加1.35%).利用纳米压痕法测定纳米晶Li7Si3合金的杨氏模量为(30.6±2.4)GPa.     

A Novel Fluorescence Probe 9-（4-（1,2-diamine）benzeneN 1-phenyl）acridine for Nitric Oxide Determination

A novel fluorescent probe 9-(4-(1,2-diamine)benzene-N1-phenyl)acridine(DABPA) was synthesized for the detection of nitric oxide(NO) and characterized by IR, 1H-NMR and EI-MS spectroscopy. Based on a photoelectron transfer mechanism, the fl uorescence intensities of DABPA were investigated with the different concentrations of NO. Under the optimal experimental conditions, the fl uorescence intensity of DABPA had a good linear relationship(R2=0.9977) with NO concentration in the range from 1×10-7 to 1.5×10-6 mol/L with a detection limit of 1×10-8 mol/L. The cytotoxicity induced by DABPA was evaluated by the MTT(3-(4,5-dimethylthiazol-2-yl)-2,5diphenyl tetrazolium bromide) assay for biological application. Furthermore, the probe DABPA had also been successfully applied to real-time image NO produced in PC12 cells in the presence of L-arginine.     

PLD preparation of GeS6 amorphous film and investigation on its photo-induced darkening phenomenon

GeS6 chalcogenide amorphous fi lm was deposited on glass substrate via PLD（pulsed laser deposition） technique. The performance and structure of the fi lm was characterized by XRD（X-ray diffraction）, SEM（Scanning Electron Microscopy）, EDS（Energy Dispersive Spectroscopy）, optical transmission spectra, and Raman spectra, etc. The GeS6 amorphous fi lm was irradiated by 532 nm linearly polarized light, and its photoinduced darkening was investigated. The results showed that the GeS6 chalcogenide amorphous fi lm was smooth and compact with uniform thickness and combined with the substrate fi rmly, and its chemical composition was in consistency with the bulky target. When laser energy was fi xed, the transparence of the fi lm declined with the increase of the laser irradiation time. Obvious photo-induced darkening and relaxation phenomenon of the fi lm after laser irradiation were observed in this investigation.     

Effect of Mg-film thickness on the formation of semiconductor Mg2Si films prepared by resistive thermal evaporation method

Mg fi lms of various thicknesses were deposited on Si(111) substrates at room temperature by resistive thermal evaporation method, and then the Mg/Si samples were annealed at 40 ℃ for 4 h. The effects of Mg fi lm thickness on the formation and structure of Mg2Si fi lms were investigated. The results showed that the crystallization quality of Mg2Si fi lms was strongly infl uenced by the thickness of Mg fi lm. The XRD peak intensity of Mg2Si(220) gradually increased initially and then decreased with increasing Mg fi lm thickness. The XRD peak intensity of Mg2Si(220) reached its maximum when the Mg fi lm of 380 nm was used. The thickness of the Mg2Si fi lm annealed at 400 ℃ for 4 h was approximately 3 times of the Mg fi lm.     

(2+1)维广义5阶KdV方程N-孤子解

利用Hirota双线性方法研究了(2+1)维广义5阶KdV方程,得到了单孤子解、双孤子解和三孤子解.通过进一步分析得到N-孤子解析解的表达式.借助计算机符号计算得出多孤子演化图形,展示了多孤子之间的相互作用.     

Anodic behavior and microstructure of Al/Pb-Ag-Co anode during zinc electrowinning简

In order to study the anodic behavior and microstmctures of A1/Pb-Ag-Co anode during zinc electrowinning, by means of potentiodynamic investigations, scanning electron microscopy （SEM） and X-ray diffraction （XRD） analyses, the mechanism of the anodic processes playing on the surface of A1/Pb-0.8%Ag and A1/Pb-0.75%Ag-0.03%Co anodes prepared by electro-deposition from methyl sulfonic acid bath for zinc electrowinning from model sulphate electrolytes have been measured. On the basis of the cyclic voltammograms obtained, information about the corrosion rate of the composite in PbO2 region has been concluded. The microstructures were also observed by means of SEM and XRD which showed Pb-0.75%Ag-0.03%Co alloy composite coating has uniform and chaotic orientation tetragonal symmetry crystallites of PbSO4, but Pb-0.8%Ag alloy composite coating has well-organized orientation crystallites of PbSO4 concentrated in the certain zones after 24 h of anodic polarization. It is important that Al/Pb-0.75%Ag-0.03%Co anode oxide film consists of non-conductive dense MnO2 and PbSO4 and a, fl-PbO2 penetrated into which, in fact, are the active centers of the oxygen evolution after 24 h of anodic polarization.     

Research of 6-DOF Serial-Parallel Mechanism Platform for Stability Training of Legged-Walking Robot

The concept of legged-robot stability training with a training platform is proposed and a serial-parallel mechanism platform with 6 degrees of freedom is designed for this target. The designed platform is composed of 4-DOF parallel mechanism with spherical joints and prismatic pairs, and 2-DOF serial mechanism with prismatic pairs. With this design, the platform has advantages of low platform countertop, big workspace, high carrying capacity and high stiffness. On the basis of DOF analysis and computation of space mechanism, weight supporting auxiliary mechanism and raceways-balls supporting mechanism are designed, so as to improve the stiffness of designed large platform and payload capacity of servo motors. And then the whole structure design work of the platform is done. Meanwhile, this paper derives the analytical solutions of forward kinematics, inverse kinematics and inverse dynamics. The error analysis model of position and orientation is established. And then the simulation is done in ADAMS to ensure the correctness and feasibility of this design.