利用单片机80c196kc实现等间隔采样及采样值的回显

本文主要介绍以单片机80c196kc为CPU对模拟信号进行等间隔采样以及实现对采样值回显的问题。详细介绍了测频软件及电路的实现，对等间隔采样软件实现进行了详细论述：详尽讨论了对于MG-12864-2液晶显示器的电路连接与软件控制方法；对MG-12864-2液晶显示器应用的独特之处做了细致的分析。     

Microstructural changes accompanying repair welding in 5xxx aluminium alloys and their effect on the mechanical properties

At the shipyards, the aluminium alloy 5083 is welded with a multi-pass sequence using the metal inert gas technique. If, while checking the weld integrity either after welding or during service, defects are detected in the vicinity of the weldment, repairs are usually employed to extend the service life.

The repair method involves removal of the upper passes, depending on the thickness and re-welding under the same conditions.

Purpose of this paper is to examine the microstructural changes accompanying repair welding, define their effect on properties of primary importance and set, if possible, an upper limit as far as the number of repairs is concerned.     

Microstructural investigation of the breakdown of the protective oxide scale on a 304 steel in the presence of oxygen and water vapour at 600 °C

This article focuses on the detailed microstructural investigation of the oxide scale formed on a 304 steel in the presence of oxygen and water vapour (40%) at 600 °C. The work has been carried out using a combination of microanalytical techniques including FIB, TEM, EDX and electron diffraction. The local breakdown of the initially protective oxide scale and the growth of island/crater oxide morphology are described. Special consideration is given to the influence of the microstructure of the steel and the oxide scale on the breakdown behaviour.     

Ecophysiology of ochratoxigenic Aspergillus ochraceus and Penicillium verrucosum isolates. Predictive models for fungal spoilage prevention - a review

Ochratoxin A (OTA) is a secondary metabolite produced by several species of Aspergillus and Penicillium; among them Aspergillus ochraceus and Penicillium verrucosum are two ochratoxigenic species capable of growing in different climates and thus contamination of food crops with OTA can occur worldwide. OTA can be found in a wide range of foods such as cereals, coffee, cocoa, spices, beer, wine, dried vine fruit, grapes and meat products. OTA is toxic to animals, it presents neurotoxic, immunotoxic and nephrotoxic effects. It has been implicated in a human kidney disorder known as Balkan Endemic Nephropathy. This review focuses on the ecophysiology of ochratoxin-producing Aspergillus ochraceus and Penicillium verrucosum, the effect of environmental factors on their germination, mycelial growth, and OTA production. Knowledge of environmental conditions required for sucessive stages of fungal development represent the first step towards preventing mycotoxin formation. Predictive models for different stages of fungal development are presented, which allow prediction of the time before spoilage as a function of the abiotic factors. Finally, the implications of these studies in management of barley, coffee and grapes are described. This can help to identify the critical control points in their production, storage and distribution processes.     

Structure evolution of conductive polymer composites revealed by solvent vapor induced time-dependent percolation

The authors of this paper synthesized a series of amphiphilic triblock copolymers of polystyrene-b-poly(ethylene glycol)-b-polystyrene (PS-PEG-PS) having different PEG/PS ratios with nearly identical molecular weights of the entire copolymers. The interfacial interactions in the composites consisting of carbon black and the copolymers can thus be tailored. When these conducting composites are exposed to certain solvent vapors, their electrical resistances greatly increase, showing the gas sensitivity. The present work indicated that this switching behavior is controlled by the structural relaxation of the composites because matrix swelling acts as the main mechanism. The response time has been correlated with absolute temperature by Arrhenius equation, and the estimated activation energy reflects mobility of the fillers involved in the solvent induced expansion of the surrounding polymer. Therefore, by using the gas sensibility of the conductive composites, the structure evolution of the composite materials in solid state and the effect of filler/matrix interfacial interaction on the relaxation property of the matrix polymer has been inspected. It was found that lower activation energy represents stronger interfacial interaction in case good solvent of the matrix was used for the test.     

Surface characteristics of fluorine-modified PAN-based carbon fibers

Different fluorination methods were applied to modify the surface properties of carbon fibers. The relationship between the degree of fluorination and the physicochemical properties of carbon fibers was studied using a combination of mechanical tests, elemental analysis (EA), X-ray photoelectron spectrometry (XPS), and X-ray diffraction (XRD). EA and XPS analyses of fluorinated carbon fibers showed that treatment with mixtures of F₂/O₂ introduced a much higher fluorine concentration than that with F₂ only. However, XRD analysis showed that there was no increase in the interlayer distance, due to the mild fluorination condition applied. Consequently, the oxyfluorination was one of the more effective methods to increase surface polarity of carbon fibers, which probably played an important role in improving the tensile properties of the fibers in the epoxy resin system.     

基于MPEG-4标准的VOD业务探讨

MPEG-4是动态图像专家组(MPEG)标准家庭中的一员，是国际化标准组织为多媒体通信制定的一种解决方案。介绍了MPEG-4支持的新功能和特点，并阐述了MPEG-4的关键技术，在此基础上对MPEG-4在视频点播业务中的应用问题进行了探讨。     

基于EWB的D/A数模转换器的仿真研究

阐述了D／A转换器的仿真原理，给出了T形电阻网络D／A转换器仿真模型的构造方法，并采用EWB进行了系统仿真，仿真结果表明该方法是合理、可行的。     

A Study of AlN Films Prepared by Arc Ion Plating

Hexagonal AlN films have been obtained by arc ion plating at different negative biases ,X-ray diffraction and scanning electron microscopy results show that AlN films with smooth surfaces and (002) preferred orientation are obtained at low biases ,whereas those with coarse surfaces and (100) preferred orientation are obtained at high biases,The formation mechanism of AlN is analyzed and the experiment results are discussed,The effect of bias on adhesion strength has also been examined.