AA3流动分析仪检测地表水总氰的可行性研究

总氰是一个重要的水质指标,该文旨在研究AA3流动分析检测总氰的稳定性与准确性。通过采用AA3流动分析测定了总氰标准物质、地表水样、加标水样,结果表明,AA3流动分析仪的测定结果稳定性高、准确性好。同时,将AA3法与国标法的测定结果进行比较显示,当样品浓度大于仪器检出限(0.000 5 mg/L)时,AA3法和国标法的结果没有明显差异。综上所述,AA3流动分析仪对总氰的测定具有高准确度和高精密度以及更低检出限等优点。     

Investigation of the microstructure of alkali-activated cements by neutron scattering

Significant research has been devoted to understanding and modeling the neutron scattering behavior of Portland cement pastes. The present work examines the potential of neutron scattering to noninvasively evaluate the properties of alternative cementitious materials encountered in the field. To interpret the scattering of both alkali-activated and slag-cement systems, alternative models to those typically adopted for Portland cement pastes were considered. Investigation of alkali-activated and slag-cement coupons were conducted for different sample thickness (∼0.5, 1, 2, 4, 6, 8 and 12 mm) over a wide scattering vector (Q) range (0.0005<Q>0.03 nm⁻¹ and 0.04<Q>4 nm⁻¹) on both ultra (USANS) and conventional small-angle neutron scattering (SANS) spectrometers. This wide Q range allowed determination of the fractal properties of the microstructure as well as the radius of the main scattering particle in the material. An empirical correction for multiple scattering was made based on the Dexter-Beeman equation and demonstrated that for thicker sample widths the theory correlated reasonably well. Alkali-activated fly ash was found to have the largest R value while the OPC and slag mix exhibited the largest Guinier radius. This difference was attributed to variations in the extent of multiple scattering for the samples. Successful application of this model was limited to sample thickness ≥1 mm. A combined power law-Sabine expression was also utilized to successfully model the SANS data over a Q range of 0.04-4 nm⁻¹.     

Biological activities of Solanum paludosum Moric. extracts obtained by maceration and supercritical fluid extraction

Solanum paludosum extracts obtained by maceration (SP-EtOH_CRUDE and SP-EtOH_MARC) and supercritical fluid extraction (SP-SFECO₂) were evaluated. Three extracts with distinct chromatographic profiles were obtained: SP-EtOH_CRUDE, with a complex phenolic composition; SP-SFECO₂, containing methoxylated flavonoids; and SP-EtOH_MARC, which bears mainly polar polyphenols. All extracts were strong antioxidants, as measured using the diphenylpicrylhydrazyl (DPPH) method, xanthine/xanthine oxidase/luminol and iron-induced lipid peroxidation systems. Extracts were also evaluated as modifiers of antibiotic activity in strains of Staphylococcus aureus expressing fluoroquinolone, macrolide and tetracycline efflux proteins. Despite their lack of antibacterial activity, all extracts were able to potentiate antibiotics activities by as much as eight fold. Both the maceration and supercritical fluid extraction processes were adequate to obtain extracts with different biological activities according to their patterns of phenolic compounds. The data suggest that S. paludosum could be a valuable source of antioxidants and putative efflux pumps inhibitors.     

PAA-AM-AMPS与PAA-AM高吸水性树脂的合成及保水性能

利用水溶液聚合法合成了聚丙烯酸系高吸水性高保水性树脂,其吸水倍率均在800 g/g以上,且在50 min内吸水饱和。研究了共聚单体和交联剂用量对树脂加压保水能力和恒温保水能力的影响。研究结果表明,树脂恒压放置7 d后保水率均在30%以上,保水能力随丙烯酰胺用量增加先增大后减小,随交联剂MBA用量增加先增大后减小。同时,PAA-AM-AMPS在沙土中恒温50℃时放置7 h后,保水率为75.5%,说明树脂能提高沙土的饱和含水量,有效地改良沙土的保水能力,为沙漠保水提供有效的保水剂。     

Impact of ac/dc spark anodizing on the corrosion resistance of Al–Cu alloys

An ac/dc spark anodization method was used to deposit an oxide film (6 ± 3 μm in thickness) on the Al–Cu alloy AA2219. The oxide films were formed at 10 mA/cm² for 30 min in an alkaline silicate solution, showing three main stages of growth. Scanning electron microscopy and electron microprobe analysis revealed that the oxide films are not uniform and consist of three main layers, an inner Al-rich barrier layer (∼1 μm), an intermediate Al–Si mixed oxide layer (∼2 ± 1 μm), and an outer porous Si-rich layer (∼3 ± 3 μm). In addition, microscopic analysis showed that the Al₂Cu intermetallics present in the alloy have not been excessively oxidized during the anodization process and thus are retained beneath the oxide film, as desired. The coating passivity and corrosion resistance, evaluated using linear sweep voltammetry (LSV) in pH 7 borate buffer solution and electrochemical impedance spectroscopy (EIS) in 0.86 M NaCl solution, respectively, were both significantly improved after spark-anodization.     

Synthesis and biological activity of phthalimide‐based polymers containing 5‐fluorouracil

The attachment of anticancer agents to polymers is a promising approach towards reducing the toxic side‐effects and retaining the potent antitumour activity of these agents. A new tetrahydrophthalimido monomer containing 5‐fluorouracil (ETPFU) and its homopolymer and copolymers with acrylic acid (AA) and with vinyl acetate (VAc) have been synthesized and spectroscopically characterized. The ETPFU contents in poly(ETPFU‐co‐AA) and poly(ETPFU‐co‐VAc) obtained by elemental analysis were 21 mol% and 20 mol%, respectively. The average molecular weights of the polymers determined by gel permeation chromatography were as follows: M_n = 8900 g mol^?1, M_w = 13 300 g mol^?1, M_w/M_n = 1.5 for poly(ETPFU); M_n = 13 500 g mol^?1, M_w = 16 600 g mol^?1, M_w/M_n = 1.2 for poly(ETPFU‐co‐AA); M_n = 8300 g mol^?1, M_w = 11 600 g mol^?1, M_w/M_n = 1.4 poly(ETPFU‐co‐VAc). The in vitro cytotoxicity of the compounds against FM3A and U937 cancer cell lines increased in the following order: ETPFU > 5‐FU > poly(ETPFU) > poly(ETPFU‐co‐AA) > poly(ETPFU‐co‐VAc). The in vivo antitumour activities of all the polymers in Balb/C mice bearing the sarcoma 180 tumour cell line were greater than those of 5‐FU and monomer at the highest dose (800 mg kg^?1). © 2002 Society of Chemical Industry     

The application of synchrotron-based spectroscopic techniques to the study of chromate conversion coatings

This work utilized synchrotron spectroscopic techniques such as extended X-ray absorption fine structure (EXAFS), X-ray absorption near edge structure (XANES) and synchrotron infrared microspectroscopy (SIRMS) to understand the chemistry, formation, structure and aging of protective chromate conversion coatings (CCC). We shall discuss issues related CCC formed on aluminum-copper alloys. SIRMS combined with argon ion sputtering demonstrated spatial and depth chemical variations of the CCC formed on AA2024-T3. XANES indicated that in the first stages of CCC formation the thickness depends on the Cu content of the substrate and that thinner CCC appears to contain less Cr⁶⁺ for protection. Micro-XANES shows that even monolayer coverage of chromate can protect the alloy surface. EXAFS and XANES measurements were used to monitor the structural changes of the CCC with time. It was observed that a slight decrease in the Cr(VI)Cr(III) ratio occurred during the first 24 h following coating. The structure of the CCC is in close agreement with a Cr mixed oxide. EXAFS data appeared to indicate an increase in ordering in the CCC structure with time.     

VAc/AA改性的VAE乳液高速接嘴卷烟胶的研制

介绍了VAc/AA改性的VAE乳液高速接嘴卷烟胶的制备方法。研究了各种因素对胶粘剂性能的影响。结果表明 :VAc/AA用量增加 ,VAE乳液的粘接性能增强。选择与VAE乳液相适应的乳化剂和控制适宜的pH值 ,可以增加VAE乳液的稳定性。采用滴加引发剂和混合单体的方法 ,可以避免过速反应产生及大粒径胶粒生成