Study on combustion characteristics of blended coals

Power plants in China have to burn blended coal instead of one specific coal for a variety of reasons. So it is of great necessity to investigate the combustion of blended coals. Using a test rig with a capacity of 640 MJ/h with an absolute milling system and flue gas online analysis system, characteristics such as burnout, slag, and pollution of some blended coals were investigated. The ratio of coke and slag as a method of distinguishing coal slagging characteristic was introduced. The results show that the blending of coal has some effect on NO _x but there is no obvious rule. SO _x emission can be reduced by blending low sulfur coal. Translated from Proceedings of the CSEE, 2005, 25(18): 97–103 [译自: 中国电机工程学报]     

Effects of various post-treatments on carbon nanotube films for reliable field emission

In this report, the FE characteristics of carbon nanotubes (CNTs) treated using both thermal annealing and mechanical coatings on the as-grown CNTs systematically studied. It was found that in the high temperature annealed samples, CNTs were attacked at its root during annealing due to a small amount of oxygen, and were pulled out of the substrate in places after FE measurements because of the contact resistance. However, for the mechanically coated samples both with spin on glass (SOG) and polymethyl methacrylate (PMMA), CNTs were found to be nearly intact after FE measurements and showed reliable FE characteristics over repeatable voltage scan. The reliability of CNTs during FE could be owing to the strong adhesion of CNTs to the substrate both by SOG and PMMA coatings.     

环保中/高密度纤维板生产成本与性能问题 系统解决方案的研究(Ⅲ)

使用永港·伟方UF-1改性剂制备的改性脲醛胶粘剂生产E1级中纤板,胶粘剂生产成本降低10%,板材的各项力学性能均能达到国家标准,甲醛释放量达到了E1级标准,具有推广价值。     

致密低渗透气田的试井特征分析--以新场气田为例

经对新场气田的试井资料处理,建立了不同类型储层典型井试井解释范例,得出低渗透试井判别式和判别图版,对该区具有低渗透特征的试井曲线进行了讨论。根据试井结果,可识别气藏(气层)储集类型,确定产层物性参数,为气藏动态分析提供基础资料。为开发致密低渗砂岩气藏、保持稳产高产奠定基础。     

浅谈水泥基渗透结晶型防水材料标准及性能指标

针对GB18445-2001《水泥基渗透结晶型防水材料》标准在使用过程中发现的一些问题，对标准中的部分性能指标的确定及试验方法提出修改意见。     

世界汽车及其润滑油的发展与排放的相关性分析

介绍了美国，欧洲，日本，中国汽油机油与柴油机油的发展过程，现状，趋势及其与排放的相关性，指出：90年代美国环保要求与节能变得更加严格，美国内燃机油规格进展充分反映了这一变化；欧洲，日本进入21世纪总的方向也是如此；中国的轿车工业主要是世界知名汽车厂商合资生产，其内燃机油规格遵守世界汽车厂商的要求，基本上跟随欧洲规格。     

高频超声波在氧化皮中传播性能标定

对高频超声小在12Cr2MoWVTiB(G102钢）和12Cr1MoV钢钢管运行所产生氧化皮中的传播速度进行了定量标定，并对标定误差进行了统计计算，结果表明，12Cr1MoV钢氧化皮测厚标定点最大偶然误差值为0．050mm,G102钢为0．030mm，并指明了误差来源。     

硅尖阵列-敏感薄膜复合型阴极真空微电子压力传感器特性的测试

封装、测试了硅尖阵列-敏感薄膜复合型阴极的真空微电子压力传感器，在计算机模拟计算的基础上，对封装好的真空微电子压力传感器进行了实物测试，得出实物测试场发射电流曲线（开启电压低，发射电流曲线与计算机模拟曲线一样，电压45V时发射电流可达到86mA，平均每个硅尖为21μA）、压力特性曲线（呈线性变化，与计算机模拟计算的曲线相近）及灵敏度数据。电压1.5V即可测试并且其压力特性成线性变化，灵敏度为0.3μA/kPa。     

工业锅炉热效率测试方法与实践

本从测试原理、测试仪器及测试计算等方面系统介绍了利用ENERAC942－XP型燃烧效率计算机测试工业锅炉效率的一种方法。