Determination of heavy metals and volatile aromatic compounds in used engine oils and sludges

Assessment of contaminant releases during utilization of used oils is essential for the determination of environmental acceptability. These paper reports the results of the study examining a toxic metal leachability from used engine oil and sludge samples employing leaching test (TCLP). The leaching test indicated that lead in oil samples exceeded 5-ppm concentration level what qualified them as a toxic waste. The samples of contaminated sludge were found to contain high concentration of total lead, barium and chromium, but the leaching test showed concentration below regulatory limit. The total content of benzene, ethylbenzene, toluene, and xylenes (BETX), and naphthalene in used oil and sludge samples was also determined and was found not to be a significant factor to contamination.     

PP／mPE／无机填料三元复合材料的形态结构和力学性能

采用刚性无机填料对茂金属聚乙烯（mPE)弹性体增韧聚丙烯（PP）二元共混体系进行增强，从而制得PP／mPE无机填料三元复合材料。分别探讨了CaCO3用量对复合材料拉伸性能和低温冲击性能影响，并考察了不同填料的增强效果。实验结果表明，由于弹性体的存在，无机填料的增强作用减弱；共混物的低温冲击强度也因填料的加入而大幅度下降，但经过表面处理的高岭土体系的冲击强度反而提高。SEM断裂形貌显示，未经表面处理的填料和基体的界面结合较弱，而改性高岭土则以层状结构分散于基体中，并呈现牢固的界面结合。     

低翘曲玻纤增强PET复合材料的制备和性能研究

依据降低翘曲的机理，选用不同降低翘曲的方法，制备了系列翘曲玻纤增强PET复合材料，结果表明，具有较高形状对称性的填料，如滑石粉，云母粉和玻璃微珠都能不同程度地降低玻纤增强PET体系的翘曲，非晶聚合物也能有效改进该体系的翘曲性能。     

Recent Advances in Conjugated Transition Metal-containing Polymers and Materials

Metal-containing conjugated oligomers and polymers are reviewed, focusing on the work carried out by the author and coworkers since 1995. The synthesis of model systems, electropolymerizable monomers and polymer films are discussed, along with the electronic and spectroscopic properties of these systems. The application of phosphino-oligothiophene ligands as an entry to conjugated metallopolymers is described.     

补强剂和共混工艺对PA/PVC/NBR三元共混弹性体性能的影响

在选择三元共聚尼龙（PA）、聚氯乙烯（PVC）、丁腈橡胶（NBR）为主体材料，制备PA／PVC／NBR（10／30／60）三元共混弹性体的工作基础上，进一步探讨了填料品种和用量，共混温度，加料顺序等因素PA／PVC／NBR三元共混弹性体的影响。试验结果表明：在PA／PVC／NBR（10／30／60）共混体系中，补强型填料的补强效果优于非补强型的填料，6种填料补强效果依次是：快压出炭黑＞半补强炭黑＞白炭黑＞活性重质，CaCO3＞陶土＞滑石粉，快压出炭黑的适宜用量是20－50份。在制备PA／PVC／NBR三元共混物时，适宜的共混温度是122－140℃，并且采用二段法混工艺制得的共混物性能优于采用一段法共混工艺。     

电磁屏蔽涂料的发展现状及趋势

电子产品的日益普及使得电磁干扰成为一个突出问题,应用电磁屏蔽涂料是消除电磁干扰简单而有效的方法,本文介绍了电磁屏蔽涂料的组成、效能评价方法、技术思想、存在的问题以及发展趋势。复合型以及水性屏蔽涂料具有广阔的研发前景,高效能、宽频带、寿命长的电磁屏蔽涂料将会受到市场欢迎。     

废旧电池中有价金属回收利用探讨

随着中国经济的稳步发展和投资环境的不断优化,中国已成为电池的制造和消费大国,每年产生数亿只废旧电池。对废旧电池的回收利用已成为全社会关注的问题。介绍了废旧电池中有价金属的回收利用方法,着重介绍了锂离子二次电池正极材料有价金属的回收利用方法。指出,中国商品化的正极材料只有钴酸锂（LiCoO2）,这种正极材料钴含量高,且钴价值高,并且回收工艺可行,因此,从钴酸锂正极材料中回收钴等有价金属,对发展中国的循环经济具有重要意义。同时介绍了锂离子二次电池正极材料的研究现状。     

高强度超轻填料──氧化铝空心微珠

介绍氧化铝空心微珠的用途、性能及生产过程。     

A Solder Alloy Filled Z-Axis Conductive Epoxy Adhesive

Epoxy adhesives filled with four different volume fractions of eutectic tin-bismuth solder alloy were prepared and the effect of filler content on the electrical and mechanical properties of these anisotropic electrically conductive adhesives was investigated. The results show that the adhesive containing the lowest amount of the filler alloy had the best combination of conductivity, insulation resistance and shear strength. The DSC-measurements suggested that the filler melts before the cure of the resin begins which allows the filler to wet and bond well to the conductors. This was verified by SEM/EPMA examinations. A temperature cycling test and high humidity, high temperature treatment were conducted on the best composite adhesive. The temperature variation had no effect on conductivity of the joints while humid and hot environment decreased the conductivity.     

从煤矸石制取氯化铝联产橡胶填料的研究

在实验室小试、中试装置上进行了从煤矸石制取氯化铝联产橡胶填料的研究，考察了煤矸石性质、工艺条件等对产品质量的影响，结果发现最佳工艺参数为焙烧温度６００～ｑ００℃．焙烧时间为１５～９０ｍｉｎ．焙烧温度对产品质量影响更为显著，制得结晶氯化铝产品质量达到合格品标准，填料用作橡胶制品填充剂具有较好补强与抗曲性能，其胶片的物理机械性能达到普通橡胶板标准。