机械合金化Fe50Ti50非晶的形成及球磨强度对它的影响

本文通过电子扫描和Ｘ衍射对机械合金人Ｆｅ５０Ｔｉ５０非晶粉末形成做了研究。研究发现：机械合金非晶形成可以大致地分为二个阶段－粉末的破碎阶段和非晶的形成阶段。另外，对球磨强度对非晶形成的影响进行了研究。结果表明：强度低时粉末需要较长的时间才能形成非晶，强度高时粉末形成非晶的时间大大缩短，但在随后的球磨中，粉末会重新晶化形成新相。     

Al—Si—Mn—Fe合金中相组成的电子衍射鉴定

本文利用选区电子衍射,并结合X射线衍射对六种不同成份的急冷合金及其退火后的相组成进行了鉴定,得到了它们的相组成。     

用过滤工艺全面提高铸锭质量

探讨了过滤器孔径对6063铝合金铸锭组织和性能的影响规律。在此基础上指出,在过滤工艺恰当时,不仅可以减少铸锭中的夹杂物,而且可以有效地防止裂纹、羽毛晶等连续铸锭中的常见缺陷。     

微量Ag对CP276合金性能和组织的影响

研究添加不同含量的Ａｇ对ＣＰ２７６合金的拉伸性能和时效组织的影响。对拉伸强度、延伸率测试及透射电镜观察表明：０．１１ｗｔ％加入可促进Ｔ１相析出，使合金强度值升高；０．３５ｗｔ％Ａｇ的加入可在时效前期生成富Ａｇ、Ｍｇ的稳定的ＧＰ区，从而降低合金中Ｃｕ的固溶度，阻碍Ｔ１相析出，时效后期，ＧＰ区分解，生成大量Ｔ１相，使合金强度值显著升高。     

Effect of cationic surfactant and inorganic anions on the electrochemical behavior of carbon steel in formation water

Corrosion behavior of carbon steel in formation water associated crude oil from Egyptian western desert was studied at various concentrations of dodecyl dimethyl ammonium chloride (CS) as a cationic surfactant. Polarization curves indicate that CS has a good inhibition efficiency for carbon steel in formation water and behaves as cathodic inhibitor. The inhibition efficiency was found to increase with increase in CS concentration until reaches a maximum constant value corresponding to the critical micelle concentration of CS and decrease with increase in solution temperature. The adsorption of CS follows the kinetic thermodynamic model and Flory-Huggins isotherm. Thermodynamic parameters obtained indicate that that the presence of the CS increases the activation energy. Polarization and Impedance measurements indicate that the addition of KI has a significant synergistic effect with CS and results in increase the inhibition efficiency of CS in formation water.     

Growth and optical property of zinc oxide thornballs

A new microstructure, thornball, of zinc oxide (ZnO) was synthesized by a very simple solid vapor deposition process under lead oxide (PbO) atmosphere. The microthornballs consist of numerous needles, which extend outwards in all directions symmetrically. They have dimensions of 120 μm in diameter, while the average diameter of the needles is about 100-200 nm. The needles on the balls grow along the 〈0 0 0 1〉 orientation and have gradient compositions along radial. Control experiments proved that PbO played an important role in the growth. Additionally, photoluminescence property was observed and provided the evidence that PbO did not deteriorate the optical properties of ZnO thornballs. This kind of microstructures has potential applications in the field of photochemical catalysis.     

Isothermal Gas Forming of Mg Alloy AZ31 Sheet

There have been reports on sheet forming of Mg alloy in industry via the punch and die method;this paper is probably the first formal one for studying the sheet formability of AZ31 employing pressurized gas to press the sheet into a female die cavity at various elevated temperatures.The results indicate it is feasible to form a rectangular box via pressurized gas from extruded sheets of 0.5 and 1.7 mm thick.The formed box has 1:2 depth over width ratio,which should be large enough when dealing with realistic industrial sheet forming parts.Presently,forming a sheet of 0.5 mm thick is considered a technical challenge by industry,and it is conquered as demonstrated in this paper.Gas forming technique applied to Mg alloy is unprecedented and shows potential for industrial utilization.     

Influence of Ti Powder Characteristics on Combustion Synthesis of Porous NiTi Alloy

Porous NiTi shape memory alloy (SMA) is a novel biomedical material used for human hard tissue implant .The influence of elemental titanium powder characteristics such as powder morphology, particle size and specific surface area( SSA) on the minimal ignition temperature ,combustion temperature and final product of porous Ni-Ti SMA fabricated by combustion synthesis method was investigated in this paper by scanning electron microscopy (SEM) and laser diffraction.The preliminary data indicated that the titanium powder characteristics had a strong effect on combustion synthesis of porous NiTi SMA.     

Antimutagenic activity of natural phenolic compounds present in the common bean ( Phaseolus vulgaris ) against aflatoxin B 1

Polyphenols with antimutagenic and anticarcinogenic properties are present in fruits, vegetables and legumes. In this study, the Salmonella typhimurium tester strains TA98 and TA100 were used in the microsuspension assay to examine the antimutagenic effect of phenolic compounds extracted from the common bean (Phaseolus vulgaris) against mutagenicity induced by aflatoxin B 1 (AFB 1 ). A dose-response curve was constructed for AFB 1 ; from which a level of 40ng AFB 1 /tube was selected for all antimutagenicity assays. The AFB 1 and phenolic extract (PE) were not toxic to the bacteria at concentrations tested. In the case of PE, results were similar to the number of spontaneous revertants for TA98 and TA100. The inhibitory effect of PE against AFB 1 mutagenicity was dose-dependent at the lower concentrations tested (2.5, 5, 10, 12.5, 15 and 25 μg-equivalent ( + )-catechin/tube for TA98; 0.5, 1, 1.5, 2.5, 5, 10 and 25 μg-equivalent ( + )-catechin/ tube for TA100). Further, a two-stage incubation procedure was used to investigate the potential interaction between PE and AFB 1 . The greatest inhibitory effect of the PE on AFB 1 mutagenicity occurred when PE and AFB 1 were incubated together. When the bacteria were first incubated with PE followed by a second incubation with AFB 1 , lower inhibition was observed. Lower inhibition was also observed when the bacteria were first incubated with AFB 1 followed by a second incubation with PE. The results suggest that the mechanism of inhibition could involve the formation of a chemical complex between of PE and AFB 1 .     

复合聚全氟乙丙烯材料的介电及高频击穿性能研究

在聚全氟乙丙烯(FEP)中添加 TiO_2和 Al_2O_3,通过热压成型的方法制备了 FEP/TiO_2复合材料和 FEP/Al_2O_3复合材料,研究了氧化物添加量对复合材料介电常数、介电损耗和高频击穿性能的影响。结果表明,随氧化物含量的增加,复合材料的介电常数和介电损耗均增加;在同一添加量下,TiO_2对复合体系的介电性能影响较大。FEP/TiO_2复合材料的高频击穿性能随 TiO_2含量的增加而下降,在 TiO_2含量为4.0%(质量分数,下同)时,复合材料的损伤阈值已降为 FEP 材料损伤阈值的48.9 %。而 FEP/Al_2O_3复合材料的高频击穿性能随 Al_2O_3含量的增加而升高,当 Al_2O_3含量为1.2%时,复合材料的损伤阈值已增大到 FEP 材料损伤阈值的2倍,达到313 J/m~2。