碳纤维经氧等离子/KH550处理后的表面形态和结构

碳纤维(CF)表面经氧等离子、KH550和 LiAlH_4处理后,其物理和化学性能得以改善.由于提高了 CF 和树脂间的联结,使 CF 复合材料的层间剪切强度提高50%以上,在湿热下的强度保留率达94%以上.使用纤维接触角测定仪,SEM 和 XPS 等对 CF 表面的浸润性、形态和化学组成进行了研究.实验指出:CF 经等离子和 KH550处理后,其临界表面能有了提高;CF 本身仅受氧离子刻蚀,故其拉伸强度的损失小于其他处理方法.     

纳米碳酸钙的表面活化改性研究

本文主要介绍通过加入特定的表面改性剂,制得了表面改性的活性碳酸钙.并对活化过程中的一系列影响因素,如活化温度、活化时间、碳酸钙悬浊液浓度、表面改性剂用量进行了研究.     

改性活性炭的表面特性及其对苯酚的吸附性能

研究了表面改性对活性炭吸附苯酚性能的影响。研究发现,硫酸氧化可增加活性炭表面酸性基团的含量,提高了活性炭的表面亲水性,降低pHPZC值,因而对吸附水中的苯酚的性能产生明显影响,降低了对苯酚的吸附。     

Surface Preparation of Tantalum for Encapsulation and Adhesive Bonding

A number of methods of surface preparation of tantalum for encapsulation in silicone rubber and for structural adhesive bonding were explored. The only ones which could be generally useful were boiling for 24 hours in distilled water (28% improvement) or boiling for 4 hours in 20% sodium hydroxide solution followed by boiling for 2 hours in dilute hydrochloric acid (34% improvement). An alternative, which could sometimes be used, was heating in air for at least 2 hours at 100°C.     

An Experimental Study of Fatigue Strength for Adhesively Bonded Tubular Single Lap Joints

In this paper, manufacturing technology of the tubular single lap adhesive joint was studied to obtain reliable and optimal joint quality. In addition, a surface preparation method and a bonding process for the joint were devised. The effect of the adhesive thickness and the adherend roughness on the fatigue strength of the joint was experimentally investigated. From experiments, it has been found that the fatigue strength of the joint increased as the adhesive thickness decreased and the optimal arithmetic surface roughness of the adherends was about 2 μm.     

In situ observation of methoxide hydrogenation on the Ni(111) surface

The surface chemistry of methoxide (CH₃O-) on the Ni(111) surface has been studied in the presence of hydrogen pressures up to 2 Torr. During heating in vacuum methoxide decomposes to H₂ and CO, which desorb at 380 and 445 K, respectively. The CH₃O-decomposition process is rate limited by CH bond breaking and exhibits a strong deuterium kinetic isotope effect in CD₃O-. In the presence of ambient hydrogen pressures of 0.02–2.0 Torr both CH₃O- and CD₃O-are hydrogenated directly to methanol at 310 K. Methoxide is hydrogenated by adsorbed hydrogen, which nearly saturates the surface at these pressures and temperatures.     

无机颜料的表面处理

介绍了无机颜料表面处理的作用及实现途径,并对其作用机理进行了分析,还叙述了表面活性剂的选择和处理方式。     

碳钢贮热水箱的模拟腐蚀试验及涂层耐蚀性能研究

碳钢贮热水箱长期在30～80°C温变的热水环境中工作,易受到热水及水中杂质的腐蚀。研究了不同温度下Q235钢在自来水及含100μg/mLNaCl的自来水中的腐蚀速率。对裸钢及其涂覆相同厚度的不同涂层──酚醛环氧(自制)、钛纳米聚合物和改性聚乙烯后在70°C自来水中的极化曲线进行了比较。采用动电位扫描极化曲线测量和电化学交流阻抗谱法(EIS)分别对涂覆不同涂层的Q235钢进行了耐蚀性能研究。结果表明,3种防腐涂层均具有较佳的抗热水性,耐蚀能力较强,适宜对Q235钢贮热水箱进行防护。     

汽车工业生产用热熔胶膜的研制

介绍了汽车工业生产内装饰复合材料用热熔胶膜的性能及其研制状况。这种热熔胶膜具有使用便捷,高效,生产、使用过程中没有污染的具有热熔胶膜的特长。     

Monodisperse polymer/metal composite particles by electroless chemical deposition: Effect of surface functionality of polymer particles

Micron‐sized polymer particles were coated with layers of nickel compounds by plating electrolessly in the presence of aqueous solutions of nickel chloride, sodium hypophosphite, sodium citrate, and ammonium chloride at elevated temperature. The uniform functional polymer particle could be obtained by seeded polymerization. To investigate the effect of surface functionality on the conditions for nickel deposition, the polymer particle was functionalized with the thiol group. From morphological observation, it was found that the mode of nickel deposition was greatly dependent on the surface functionality of the polymer particle. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 420–424, 2003