考虑渗流力的基坑涌砂分析

本文根据基坑防渗帷幕周围的地下水渗流特征，分析了渗流力对基坑流砂的影响，提出了按涌砂安全系数进行防渗帷幕埋入深度计算的方法。     

冷弯型钢纵向变形的理论分析及计算

对冷弯型钢的纵向变形过程进行了力学分析，得到了变形微分方程，求得了转动角的理论公式，并对其变形形状进行了分析计算。     

Equilibrium Studies of the System'(Fe,Co)O'–(Fe,Co)3O4 by Solid-State emf Measurements in the Temperature Range 970 to 1370 K

The equilibrium reaction 3'(Fe, Co)O'( ss ) +1/2O₂ ( g ) ⇄ (Fe, Co)₃O₄( ss ) was studied in the temperature range 970 to 1370 K for seven different total compositions of molar ratios 0.5 < Fe/(Fe + Co) ≤ 1.0. The equilibrium pressures of oxygen were determined by using galvanic cells incorporating calcia stabilized zirconia as solid electrolyte and the Fe/Co ratios in the solid-solution phases by wavelength dispersive spectrometry microprobe analyses. The activities of 'FeO' in the cobaltowüstite phase were then derived from the experimental results obtained.     

不能移动封隔器管柱变形受力分析——封隔器管柱受力分析系统讨论之五

不能移动封隔器管柱是油气井封隔器完井的一种常见类型 ,在井内压力、温度、流体 (井内压力、温度、流体简称井内条件 ,下同 )发生变化时 ,不能移动封隔器管柱受力分析是保证井下安全和完井作业成功的关键 ,同时该管柱受力分析与自由移动封隔器管柱受力分析有很大的差别。文中对不能移动封隔器管柱变形受力的有关问题进行了分析、推导和讨论 ,并给出了算例。     

�����޵�Ԫ�������Ż����������²�������

下部钻具组合力学性能分析中,稳定器与井壁的间隙是影响其性能的重要因素。对于多稳定器组合,事先设定稳定器与井壁接触情况既困难也不准确。本文从有限单元的基本总势能表达式出发,采用最优化理论中的罚函数法,分析了稳定器间隙对下部钻具力学性能的影响,为解决稳定器与井壁的接触问题找到了一个新方向。     

Discrete quadratic curvature energies

We present a family of discrete isometric bending models (IBMs) for triangulated surfaces in 3-space. These models are derived from an axiomatic treatment of discrete Laplace operators, using these operators to obtain linear models for discrete mean curvature from which bending energies are assembled. Under the assumption of isometric surface deformations we show that these energies are quadratic in surface positions. The corresponding linear energy gradients and constant energy Hessians constitute an efficient model for computing bending forces and their derivatives, enabling fast time-integration of cloth dynamics with a two- to three-fold net speedup over existing nonlinear methods, and near-interactive rates for Willmore smoothing of large meshes.     

Handling of fine-particles by time-averaged particle driving method in plasmas

We developed a noble technique for the fine-particle handling in plasmas. In this method a pair of point electrodes are introduced in the plasma, to which positive pulses are applied alternatively. When the pulse repetition period is shorter than the particle response time, the particles feel only time-averaged force because of their large mass. Spatial profile of the equivalent potential of the time-averaged force varies from a circle to an ellipse with an increase in the local discharge at the electrodes. The particles are eventually transported toward a middle point between two point-electrodes, being almost independent of their initial positions. This method is quite effective for converging fine particles in the plasma.     

Atomic force microscopic analysis of hydrogen peroxide bleached kraft northern black spruce fibres

Hydrogen peroxide is a potent, relatively inexpensive oxidant that chemically degrades chromophoric components in pulps and textiles. Oxidation of cellulose is a byproduct of this process step that decreases the tensile strength of individual fibres. The residence time of pulp in the bleaching reactor must be optimized to achieve the desired brightness and minimizing fibre degradation. To evaluate the impact of peroxide bleaching at the microfibrillar level, a single black spruce tree was chosen and kraft pulped. Peroxide bleaching was conducted via benchtop polyethylene bag bleaching in a temperature-controlled waterbath. Atomic force microscopy (AFM) topographical images acquired before and after the bleaching step show dramatic changes in fibre structure consistent with delignification and defects in the surface topography. This was further verified by X-ray work at Brookhaven National Laboratory, NY, U.S.A.     

均布压力作用下厚壁圆管弯矩计算方法的探讨

建立了厚壁圆管弯矩计算公式，通过分析的均布压力作用下厚壁圆管与薄壁圆管压力相对误差，给出了厚壁圆管与薄壁圆管分类原则，了解和掌握这一原则对工程师大有禅益。     

封闭式差动轮系的功率分流和力分流

对封闭式差动轮系进行了受力分析，揭示了封闭系统所起的作用以及轮系中的功率分流和力分流的现象．