压铸件包紧力的动态分析

铝合金压铸件包紧力从模具内的冷却开始到顶出铸件的过程中,始终是动态变化的。模具与合金随温度变化对应有不同的热膨胀系数,模具设计时应根据不同压铸合金选择不同的收缩率。压铸生产中因为温度变化造成的顶出铸件故障可以通过调整温度来解决。     

一种新型4H-SiC双极结型晶体管的研究

研制了一种功率型4H-SiC双极结型晶体管。通过采用深能级降低工艺和一氧化氮退火钝化工艺,提高了电流增益。详细研究了发射极-基极几何结构与电流增益的关系,发现随着发射极线宽或发射极-基极间距的逐渐增加,最大电流增益也逐渐提高并趋于饱和。器件在反向阻断电压1 200 V时漏电流为5.7 μA。在基极电流为160 mA时集电极电流达11 A,电流增益达到68。     

Preparation and dielectric properties of BaCu(B2O5)-doped SrTiO3-based ceramics for energy storage

BaCu(B₂O₅) (BCB) was used as sintering aids to lower the sintering temperature of multi-ions doped SrTiO₃ ceramics effectively from 1300 °C to 1075 °C by conventional solid state method. The effect of BCB content on crystalline structures, microstructures and properties of the ceramics was investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and dielectric measurements, respectively. The addition of BCB enhanced the breakdown strength (BDS) while did not sacrifice the dielectric constant. The enhancement of BDS should be due to the modification of microstructures, i.e., smaller and more homogeneous grain sizes after BCB addition. The dielectric constant of BCB-doped ceramics maintained a stable value with 1.0 mol% BCB, which was dominated by the combination of two opposite effects caused by the presence of second phases and the incorporation of Cu²⁺ and Ba²⁺, while further increase was owing to the increase of dissolved Ba²⁺ ions when the content of BCB is more than 2.0 mol%. The multi-ions doped SrTiO₃ ceramics with 1.0 mol% BCB addition showed optimal dielectric properties as follows: dielectric constant of 311.37, average breakdown strength of 28.78 kV/mm, discharged energy density of 1.05 J/cm³ and energy efficiency of 98.83%.     

线路故障的火灾危险性分析及鉴定

本文就常见的电气线路故障原因及其火灾危险性作出了分析,并结合实际情况阐明了各种线路故障的痕迹特征及其鉴定方法。     

数据流分析技术在电控汽油发动机维修中的应用举例

0前言现代汽车上所配备的电控发动机是机电一体化高新技术的产物,由此给传统的汽车维修业带来了根本性的变革,给汽修从业人员提出了新的挑战。维修中,如果能将传统的维修经验结合现代专业理论知识,并借助先进的检测、维修设备,从而制定出切实可行又经济的维修方案,定能让汽修从业人员更精准更快捷地检修汽车     

氧化膜强化技术在钽电容器生产中的应用

采用氧化膜强化技术在钽阳极体外表面形成抗机械应力的强化氧化膜,并模拟钽电容器回流焊过程,研究回流焊前后钽电容器漏电流变化以及对击穿电压(BDV)的影响。试验结果显示:在回流焊安装前后,应用氧化膜强化技术的电容器漏电流增幅小于普通产品14%;耐BDV比普通产品高6 V。     

Electrical characteristics and TDDB breakdown mechanism of N2-RTA-treated Hf-based high-κ gate dielectrics

This study investigates the effects of rapid thermal annealing (RTA) in nitrogen ambient on HfO₂ and HfSiO_x gate dielectrics, including their electrical characteristics, film properties, TDDB reliability and breakdown mechanism. The optimal temperature for N₂ RTA treatment is also investigated. The positive oxide trap charges (oxygen vacancies) in HfO₂ and HfSiO_x dielectric films can be reduced by the thermal annealing, but as the annealing temperature increased, many positive oxide trap charges (oxygen vacancies) with shallow or deep trap energy level will be formed in the grain boundaries, degrading the electrical characteristics, and changing the breakdown mechanism. We believe that variation in the number of positive oxide trap charges (oxygen vacancies) with shallow or deep trap energy levels is the main cause of the CV shift and difference in the breakdown behaviors between HfO₂ and HfSiO_x dielectrics. With respect to CV characteristics and TDDB reliability, the optimal temperature for N₂ RTA treatment is in the range 500-600 °C and 800-900 °C, respectively.     

电极结构对辉光放电着火电压的影响

用于微波传感的辉光管存在着火电压高的问题.本文研究了针形电极在几种电极结构下的辉光放电着火电压,电极结构分别为2针、3针和4针.在本实验的氩气压0.5～2.5 kPa范围内,几种电极结构下着火电压有明显的不同,在0.5kPa气压下着火电压差值最大(208 V).进行了电场计算,根据计算结果简要分析了着火电压变化行为.本...     

WBS在海外项目中的应用分析

WBS全称Work Breakdown Structure,即工作分解结构。根据国际通行的做法,WBS主要用来明确项目的工作范围,也就是说,在满足合同要求的情况下,建立承包商和业主之间,对于项目具体工作内容的共识。笔者探讨了WBS的重要性,编制WBS的正确方法,以及如何更新及应用WBS,在海外项目这个平台上,真正让WBS发挥出应有的作用（项目范围管理、进展检测和费用控制）。     

电动机故障分析及维修

从介绍三相异步电动机的应用特点及工作原理人手,阐述了电动机绕组烧坏原因及采取的措施,对一相或两相绕组烧坏(过热)过程进行了系统分析,结合电动机维修的实例及工作经验,在实践的基础上提出了电动机维修方法及注意事项.