脉冲相干激光雷达对运动目标成像模拟

针对运动目标，在考虑激光雷达方程、信噪比和自动增益、成像指标、噪声、图像处理等模块的基础上，对脉冲相干成像激光雷达进行了运动目标的成像模拟。     

步进电机在红外系统扫描机构中的应用

介绍了在红外系统中，采用步进电机作为扫描机构驱动元件，以Ｄ／Ａ数模转换器作细分方式的定频脉宽调制驱动方式，实现微机控制下的扫描机的构步距均匀稳定，满足红外系统分辨率的要求。     

激光干涉环圆心位置测定技术及应用

本文利用在平面内绕定轴旋转的线阵ＣＣＤ及微机系统自动测定激光干涉环圆心位置及应用于激光外径千分尺平行度检查仪平行度检查结果的自动数字化输出。     

高性能小型扫描器

本文讨论了一种高性能小型扫描器的基本原理及扫描时序变换。对采用该小型扫描器的热成像系统也作了详细的介绍。该小型扫描器可满足多种用途。     

一种红外成像系统作用距离试验评估方法

进行红外成像系统作用距离考核试验时，由于外场试验中的目标特性及气象条件与指标提出对应的目标特性及气象条件有差别，因此需要进行必要的折算。提出一种基于信噪比准则的可行的红外成像系统作用距离试验评估方法。     

A new surface characterization technique: RIMAPS (Rotated Image with Maximum Average Power Spectrum)

This work introduces a new imaging technique, Rotated Image with Maximum Average Power Spectrum (RIMAPS), for use in determining orientation and characteristics of surface topography. It consists of computing the maximum value of the averaged power spectrum, given by one step of the two‐dimensional Fourier transform, for each angle of rotation of a digitized image. The basic measurement science of this technique is described and different cases are studied. The characterization of simple geometrical figures explains the meaning of peaks and their angular positions given by RIMAPS analysis. A known surface pattern made on a sample of pure copper, mechanically ground, is used to study reproducibility, dependence on image quality and topography scale relative to pixel size and magnification. Samples of pure zinc, mechanically ground and chemically etched, were used to show the main features of RIMAPS analysis when characterizing a more complicated pattern on a real surface. All the studies performed under different conditions for observation and acquisition of images give strong evidence of the stability and robustness of RIMAPS as a technique for the characterization of topography.     

CCD技术与图像测量在叶片测量中的应用

本文主要针对叶片前缘R的性能测量，介绍一下我单位研制的专用测量设备的原理、CCD与图像预测技术的应用以及为提高测量效率、直观准确显示测量结果而采用的一些新技术的情况。     

MR imaging of focal liver lesions: comparison between turbo spin-echo and conventional spin-echo pulse sequences

The aim of this study was to compare conventional spin-echo (CSE)T ₂-weighted (T2W) images with turbo spin-echo (TSE) T2W pulse sequences in their ability to detect focal liver lesions. Seventy-eight consecutive patients with focal liver lesions were entered into this study. All patients were imaged using the gradient-echo (GE) sequence with the breath-hold technique forT ₁-weighted (T1W) images, and CSE and TSE sequences for T2W images. Qualitative evaluation included lesion detection (number of lesions detected) and conspicuity (extent of visualization of lesional borders); quantitative evaluation included the signal-to-noise (S/N) ratio and the contrast-to-noise (C/N) ratio. TSE showed the best performance in terms of lesion detection; however, the difference between TSE and CSE was significant only in the case of benign cysts (p<0.01). Conspicuity was higher with TSE and CSE, and lower with GE. The S/N and C/N ratios of the two T2W sequences were also comparable, and better than those of GE. However, the combined use of GE and TSE resulted in improved lesion detection. The results show that, because the acquisition time is greatly reduced with TSE sequences, these should be considered as first-line approach to magnetic resonance imaging of the liver for the study of focal lesions.     

利用线阵CCD实现宽波段、大视场短脉冲激光波长的远场测量

介绍了一种利用线阵ＣＣＤ实现宽波段、大视场脉冲激光波长及方向远场测量的原理和实验装置；对强烈背景下激光信号的提取与处理方法进行了理论分析和实验研究，给出了系统信噪比与探测器件工作频率的理论公式；最后简要介绍了远场实验和测试结果     

功率管焊接质量射线检测

介绍采用射线方法检测功率管芯片与基座之间的焊接质量。试验证明，选用合适的透照参数可使X射线照相和X射线实时成像对焊接部位的检测均得到较高的对比灵敏度，但X射线照相法成本低廉，一次可透照多个工件，效率高，为该功率管焊接质量的理想检测方法。