Hybrid gas-to-particle conversion and chemical vapor deposition for the production of porous alumina films

Porous alumina films can be found in a wide variety of materials, including filters, thermal insulation components, dielectrics, biomedical and catalyst supports, coatings and adsorbents. Production methods for these films are as equally diverse as their applications. In this work, a hybrid process based upon chemical vapor deposition and gas-to-particle conversion is presented as an alternative technique for producing porous alumina films, with the main advantages of solvent-free, low substrate-temperature operation. In this process, nanoparticles were produced in the vapor phase by reaction of aluminum acetylacetonate in the presence of oxygen. Downstream of this reaction zone, these nanoparticles were collected via thermophoresis onto a cooled substrate, forming a porous film. Some deposited films were subjected to post-processing in the form of annealing in air. Fourier-transform infrared spectra and X-ray energy-dispersive spectroscopy analysis confirmed the production of alumina at processing temperatures above 973 K. X-Ray diffraction revealed that the films were amorphous. Film thickness, ranging from 30 to 250 μm, and the average deposition rate were determined from scanning electron microscopy results. From transmission electron microscopy, the average primary particle size was determined to be approximately 18 nm and the formation of nanoparticle aggregates was evident. Annealing of the films at temperatures ranging from 523 to 1173 K in the presence of air did not have an effect on particle size. The specific surface area of the powder composing the films ranged from 10 to 185 m² g⁻¹, as determined from nitrogen gas adsorption by the Brunauer–Emmett–Teller method.     

热丝辅助ECR CVD制备cBN薄膜

立方氮化硼(cBN)是一种具有广泛应用价值的Ⅲ-Ⅴ族二元化合物，其优异性质可与金刚石相比拟或胜之．立方氮化硼的制备与性能研究是近二十年来材料领域关注的焦点之一．我们用热丝辅助ECR CVD方法制备了cBN薄膜，并初步探讨了热丝对cBN形成的作用．偏压并不是cBN形成的唯一主要条件，活性粒子也有非常关键的作用．     

金刚石薄膜中晶粒尺寸的研究

扫描电子显微研究表明，化学汽相沉积的金刚石薄膜中晶粒大小比较均匀。但随着沉积时间和薄膜厚度的增加，晶粒逐渐变大，且每一层内，存在少量的大金刚石颗粒，讨论了晶粒尺寸变化和大晶粒形成的原因和机制。     

超声波对化学镀Ni－Cr－P非晶态薄膜的金刚石性能的影响

研究了超声波对化学镀Ｎｉ－Ｃｒ－Ｐ非晶态薄膜的金刚石性能的影响。结果表明，超声波可使金刚石表面非晶态薄膜更加均匀和致密，从而提高了抗压强度，氧化温度和晶化后的强度。随超声波频率的增加，金刚石性能有增加的趋势。     

金刚石排锯及其合理使用

本文分析总结了锯切加工大理石、花岗石、毛板的金刚石排锯条的安装,使用原则,研究了金刚石刀头的配方,结构等质量性能。     

微机控制托辊管筒加工机床的设计

介绍了一种生产效率高、加工质量稳定、利用单片机控制液压传动系列带式输送机托辊管筒自动加工机床的设计过程。     

Multi‐layered flat‐surface micro‐optical components directly molded on an LCD panel

Abstract— We have developed a process to fabricate optical components, such as a lens, prism, or diffuser, directly on to a glass substrate. Processes include precision mastering by diamond cutting and multi‐layer photopolymer (2P) molding to realize flat surfaces and the integration of multiple components with an alignment within a few micrometers.     

Teaching-Material Design Center: An ontology-based system for customizing reusable e-materials

Use of electronic teaching materials (e-material) to support teaching is a trend. e-Material design is therefore an important issue. Currently, most e-material providers offer a package of solutions for different purposes. However, not all teachers and learners need everything from a single package. A preferable alternative is to find useful material from different packages and combine them for a particular course. Currently, most educators collect the material manually, which is time-consuming and may result in missed material. In this paper, we describe a system – the Teaching-Material Design Center, which follows the standard of Sharable Content Object Reference Model – to separate e-material for use as teaching templates and learning objects and to label the material with use of semantic metadata for searching. This system can find existing teaching templates and learning objects for e-material designers and provide a convenient environment for constructing customized e-material for different requirements. We describe the implementation and evaluation of the proposed system for a course. Our system is efficient in finding teaching templates and learning objects and shortening the e-material development process.     

新型PDC钻头的防斜打快效果及评价

大庆油田海拉尔地区的地层倾角大、岩屑录井荧光级别低,亟待解决满足岩屑录井要求的防斜打直问题。为了能够在获得足够大的岩屑颗粒和提高机械钻速的基础上达到防斜打直的目的,制定了采用大切削齿B425型PDC钻头配以小钟摆钻具组合的现场试验方案。试验表明:B425钻头与牙轮钻头所破碎的岩屑颗粒基本相当,能够满足地质岩屑录井的要求;与牙轮钻头相比,B425钻头显著地提高了机械钻速,降低了钻头费用,减少了起下钻次数;单只B425的进尺可达1000m以上,相当于2~3只牙轮钻头的进尺;采用PDC钻头配以小钟摆钻具组合,可以较好地解决防斜打直问题。此外,针对试验中遇到的问题,通过改进井身结构和调整钻井参数,形成了一套适合于海拉尔地区的防斜打快技术。