耐高温绝缘涂层的研制

采用有机硅树脂、无机粘结剂和无机填料制备的有机无机复合耐高温绝缘漆，其涂层经600℃，1h的热处理后可具有良好的附着力和绝缘性能。配套后的绝缘涂层，可在250℃下长期使用，并具有良好的耐冷热循环、耐湿热的能力。     

Thermal Shock Failure in Thick Epoxy Coatings

In this paper we describe an apparatus for reproducibly measuring thermal shock resistance of thick polymer layers bonded to metals. The thermal shock behavior is discussed in terms of epoxy samples bonded to an aluminum substrate. It was found that both high resin toughness and low resin thermal expansion coefficient improved thermal shock resistance of thick coatings, but only a sample containing 60wt. % glass beads did not develop a failure crack. Effects of sample thickness, temperature gradient, and resin composition on thermal shock behavior are discussed.     

Improvement of structural stability and electrochemical activity of a cathode material LiNi0.7Co0.3O2 by chlorine doping

In the process of Li⁺ intercalation-deintercalation, electron removal is accompanied simultaneously. Oxygen was found to compensate electron removal both in theoretical calculations and practical experiments. Chlorine addition to LiNi_0.7Co_0.3O₂ was expected to exchange electrons in that Cl⁻ was easier to lose electrons than O²⁻. LiNi_0.7Co_0.3O_2−xCl_x was identified as a pure hexagonal lattice of α-NaFeO₂ type by X-ray diffraction. X-ray photoelectron spectroscopy was used to analyze the influence of chlorine substitution on the oxidation state of transition-metal ions. Charge-discharge experiments and cyclic voltammetry confirmed that chlorine addition was an effective way to improve reversible capacity and structural stability in cycles.     

Molybdenum Oxycarbide and Tungsten Oxycarbide Coatings on Silicon Carbide Fibers

The strength and toughness of fibrous composites depend on the interface properties which control the bonding between the fibers and matrices. One method of controlling the interface involves coating the fiber with an appropriate material. In a previous study, it was found that there is a definite advantage in using low coating temperatures to prevent fibers from degrading. We therefore were interested in a report that Mo₂C could be deposited from Mo(CO)₆ at temperatures as low as 300° to 475°C. Our studies indicated that the material was not Mo₂C, but an oxycarbide, which, with an analogous tungsten oxycarbide coating, was applied to SiC yarns. Both oxycarbides could be converted to the metals by heat-treating in N₂.     

船舶防污涂料的研究与发展

简要介绍船舶防污涂料的发展历程,并对几种新型无毒防污涂料的前景作了展望。     

飞行器电磁窗耐雨蚀复合涂层的制备

研制了电磁窗用耐雨蚀底漆和耐雨蚀面漆，介绍了该配套涂料体系的制备工艺，并列举了其性能指标。讨论了耐雨蚀面漆中聚酯树脂、多元醇和颜料对其性能的影响，施工工艺对耐雨蚀涂层与底涂层之间配套性能的影响。     

The structure of model coatings: latex-bound plastic pigment coatings

The immobilization and consolidation of model coatings based on monodisperse polystyrene (plastic pigment) and S/B latexes of known particle sizes were studied in terms of their packing volumes and the extent of latex shrinkage, which was found to increase with increasing pigment volume up to the critical pigment volume concentration (CPVC). The maximum latex shrinkage was estimated from the CPVC. Then, the porosity of model coatings was calculated based on three proposed latex shrinkage models: maximum, minimum, and linearly decreasing latex shrinkage. The number of pores and the average equivalent spherical pore diameters were subsequently calculated. The opacity and gloss of model coatings on polyester films were measured and their porosity was also determined by a simple coat weight-thickness method. The CPVC values determined by the opacity, gloss, and porosity versus PVC relationships, respectively, agreed very well with each other. The CPVCs determined by the opacity and porosity versus PVC curves were identical. The comparison between the theoretically calculated and experimental porosity values showed that the linearly decreasing value between the maximum and minimum latex shrinkage would best fit the experimental porosity data. The effect of plastic pigment particle size on the optical properties and porosity of model coatings was also studied and it was observed that the coating opacity and porosity increased with increasing plastic pigment particle size, but the gloss decreased. Additionally, a minimum crack-free temperature (MCFT) of latex-bound coatings was proposed to better predict the behaviors of latexes as pigment binders. The wet state of model coating dispersions, the surfaces of consolidated model coatings, and their internal structure were examined by both electron and atomic force microscopy, and their micrographs were found to be consistent with our immobilization and consolidation models.     

负离子乳胶漆的研究及应用进展

介绍了空气中负离子的作用、负离子乳胶漆释放负离子的原理和国内外负离子乳胶漆产品的研发进展。     

氮掺杂纳米TiO_2改性涂料及其抗菌性能

将自制的氮掺杂锐钛矿型纳米二氧化钛光催化剂作为功能性组分,加入耐光催化氧化的硅丙乳胶涂料中,制备出一种新型光催化功能性建筑涂料,实现了可见光光催化效应。使用紫外-可见光吸收光谱研究该功能性涂料对紫外线的吸收能力;采用菌落计数法研究该涂料在可见光照射下对金黄色葡萄球菌的杀灭性能。同时分析了纳米粉体种类、引入量及方式对涂料紫外线的吸收性能和抗菌性能的影响。     

抗菌灭病毒涂料的研制及表征

在评价多种杀菌剂的抗病毒性能的基础上,筛选出杀菌和抗病毒性能均优异的功能助剂三氯苯基马来酰亚胺,用以研制成一种杀菌灭病毒功能内墙涂料。