储层识别模式的研究

用数学方法建立气测井油气储层识别模式,以解决录井中实时软件在判别依据少的条件下,及时识别油气显示假异常的难题。该判别式经实用,正到率达90％。     

Analysis of culture fluorescence by a fiber-optic sensor inNicotiana tabacum plant cell culture

The on-line sensing of viable cell weight in plant cell culture process is applied to analysis and control of process. The fiber-optic fluorescence sensor was constructed to measure the NADH-dependent fluorescence inNicotiana tabacum plant cell culture and the analysis of fluorescence signal was done to be correlated with the viable cell weight. The structured kinetic model for cell growth was proposed to estimate the theoretical viable cell weight. The dimensional analysis was proposed for the interpretation of fluorescence signal, in which the path length, the inner filter effect and the hydrodynamic conditions were considered as the key factors on fluorescence signal. The dimensional analysis and empirical correlation of fluorescence signal to viable cell weight was applied to the interpretation of the detected fluorescence signal during cultivation. The proposed interpretation of fluorescence signal using dimensional analysis was well correlated with the viable cell weight estimated by the structured kinetic model as well as by empirical correlation.     

圆管状声波换能器瞬态过程的分析

结合石油测井的实际情况,首次从理论上对常规声波测井仪中采用的圆管状压电陶瓷声波换能器在阶跃电压、冲激电压和正弦间断电压等激励信号的作用下的瞬态过程进行了分析,推导出了在上述几种情况下圆管状压电陶瓷换能器的声源函数和谱函数,并叙述了推导结果在声皮测井中的应用。     

Application of a Three-dimensional Wind Driven Circulation Model to Assess the Locations of New Drinking Water Intakes in Lake Ontario

A 3D transport model is used to perform a comparative analysis of several potential drinking water intakes located along the northwest shore of Lake Ontario between Toronto and Oshawa. The model is specifically used to assess each intake under both long- and short-term transport of a potential pollutant release from the Pickering Nuclear Generating Station and potential and actual pollutant releases from local land sources respectively. A model based on a 500 m grid resolution is calibrated using data collected in the aftermath of the 1992 tritium spill at the Pickering Nuclear Generation Station and subsequently used to simulate long-term transport. A model based on a 100 m grid resolution is verified using drogue studies and used to simulate short-term transport events. Both models are used to assess pollutant levels at each of nine potential intake locations under different wind scenarios and pollutant releases. Field data for the study included water quality and flow measurements from local sewers and rivers, and estimates of pollutant levels from the local waste water treatment plants. This paper describes the model setup for both the long-term and short-term transport models, calibration using field data, long-term transport modeling, short-term transport modeling, and the comprehensive analysis approach used to evaluate the nine potential intake locations proposed. Results indicated that four intakes in particular outperformed other intake locations by maintaining bottom pollutant levels within governmental standards and warning times that exceeded 20 hours.     

Model checker aided design of a controller for a wafer scanner

For a case-study of a wafer scanner from the semiconductor industry it is shown how model checking techniques can be used to compute (1) a simple yet optimal deadlock avoidance policy, and (2) an infinite schedule that optimizes throughput. in the absence of errors. Deadlock avoidance is studied based on a simple finite state model using Smv, and for throughput analysis a more detailed timed automaton model has been constructed and analyzed using the Uppaal tool. The Smv and Uppaal models are formally related through the notion of a stuttering bisimulation. The results were obtained within 2 weeks, which confirms once more that model checking techniques may help to improve the design process of realistic, industrial systems. Methodologically, the case study is interesting since two models were used to obtain results that could not have been obtained using only a single model. Supported by the European Community Project IST-2001-35304 (Ametist), http://ametist.cs.utwente.nl/.     

The formal-CAFE methodology and model checking patterns in the specification of e-commerce systems

Electronic commerce is an important application that has evolved significantly recently. However, electronic commerce systems are complex and difficult to be correctly designed. Guaranteeing the correctness of an e-commerce system is not an easy task due to the great amount of scenarios where errors occur, many of them very subtle. In this work we presents a methodology that uses formal-method techniques, specifically symbolic model checking, to design electronic commerce applications and to automatically verify them. Also, a model checking pattern hierarchy has been developed—it specifies patterns to construct and verify the formal model of e-commerce systems. We consider this research the first step to the development of a framework, which will integrate the methodology, an e-commerce specification language based on business rules, and a model checker. Adriano Pereira received the B.S. and M.S. degrees in computer science in 2000 and 2002, respectively, and he is currently pursuing the Ph.D. degree in computer science from the Federal University of Minas Gerais, Belo Horizonte, Brazil. His current interests are on performance analysis and modeling of e-business and distributed systems, and formal methods. Mark Song received the B.S., M.S. and Ph.D. degrees in computer science from the Federal University of Minas Gerais, Belo Horizonte, Brazil. His current interests are on distributed systems and formal methods – especially BMC (Bounded Model Checking). Gustavo Franco received the B.S. and M.S. degrees in computer science in 2001 and 2004, respectively, from the Federal University of Minas Gerais, Belo Horizonte, Brazil. His research was on modeling the user behavior of e-business and distributed systems, and formal methods. Actually his current interests are on software engeneering and project management of IT projects.     

Approximate feedback linearization of discrete-time non-linear systems using virtual input direct design

The design of feedback-linearization and poles-placement controllers for discrete-time non-linear plants, using Input/Output/State measurements only, is typically addressed via indirect design. In this paper we propose the use of a new technique, based on a Virtual Input Direct Design (VID²) approach. The main feature of such a technique is to reduce the control design problem into a standard non-linear mapping approximation problem, without calling for the preliminary construction of an appropriate model of the plant. As compared with the existing methods, the new one requires less computational effort, while taking full advantage of the non-linear approximation software tools already available. In this paper, the new method is described, a simple theoretical analysis is given, and some numerical examples are presented.     

Adaptive predictive control algorithm based on Laguerre Functional Model

Laguerre Functional Model has many advantages such as good approximation capability for the variances of system time‐delay, order and other structural parameters, low computational complexity, and the facility of online parameter identification, etc., so this model is suitable for complex industrial process control. A series of successful applications have been gained in linear and non‐linear predictive control fields by the control algorithm based on Laguerre Functional Model, however, former researchers have not systemically brought forward the theoretical analyses of the stability, robustness, and steady‐state performance of this algorithm, which are the keys to guarantee the feasibility of the control algorithm fundamentally. Aimed at this problem, we introduce the principles of the Incremental Mode Linear Laguerre Predictive Control (IMLLPC) algorithm, and then systemically propose the theoretical analyses and proofs of the stability and robustness of the algorithm, in addition, we also put forward the steady‐state performance analysis. At last, the control performances of this algorithm on two different physical industrial plants are presented in detail, and a number of experimental results validate the feasibility and superiority of IMLLPC algorithm. Copyright © 2005 John Wiley & Sons, Ltd.     

STUDY ON RESIDUES OF ~（14）C－FENITROTHION IN MODEL RICE－FISH ECOSYSTEM AND FIELD RICE－FISH ECOSYSTEM

ＳＴＵＤＹＯＮＲＥＳＩＤＵＥＳＯＦ~（１４）Ｃ－ＦＥＮＩＴＲＯＴＨＩＯＮＩＮＭＯＤＥＬＲＩＣＥ－ＦＩＳＨＥＣＯＳＹＳＴＥＭＡＮＤＦＩＥＬＤＲＩＣＥ－ＦＩＳＨＥＣＯＳＹＳＴＥＭＺｈａｎｇＺｈｏｎｇｌｉａｎｇ（张仲良）；ＷａｎｇＨｕａｘｉｎ（王化新）；Ｇ?..     

一种结合知识挖掘的进化规划算法

进化规划是一种进化计算方法。进化规划主要使用随机化技术来实现优化过程。与其它进化算法相比,进化规划只有变异操作,而没有交叉操作,因此变异操作的有效性对进化规划算法的成功至关重要。在传统进化规划算法中,进化规划的变异操作具有完全的随机性,这虽然有利于避免局部极值,但却导致较大的计算量。在本文算法中,将知识挖掘技术引入进化规划之中。知识挖掘技术主要用于发现规则,然后利用发现的规则指导变异操作过程,提高变异操作的效率。最终加快了进化规划算法的速度,而计算效果没有明显下降。通过知识挖掘技术的引入,进化规划算法有了初步的智能特性。将本文所介绍的新算法应用于视频编码的运动估计实验中,结果表明新算法有良好的计算速度和计算精确性。