基于中心组合实验设计的注塑成型过程优化

从统计过程控制（SPC）的观点出发，在中心组合实验设计方案的基础上，对注塑成型过程的过程参数进行优化，对参与实验的因素及各因素的交互作用对注塑制品质量特性的影响进行定量非线性分析，获得制品质量与注塑过程参数之间的非线性回归方程，寻找出对制品质量特性影响较大的因素，找出它最有利于关键指标的水平，并对其加以统计控制从而达到优化过程的目的。     

The permeation resistance of interface and the directional dependence of permeation in plasma-grafted composite membranes

Composite membranes were prepared by grafting plasma-polymerized films onto the surface of nonporous poly (dimethylsiloxane) films. Gas permeabilities of the composite membranes were measured at 35°C, 1 atm for N₂, 0₂, CO₂ and CH₄. The permeation properties of the composite membrane was analyzed using the series resistance model. There was a great interfacial resistance to CH₄ permeation through the composite membrane. The interfacial resistance was negligible for the other gases. The interfacial resistance seems to be a result of an interfacial layer caused by the interaction between the bulk two layers. For CH₄ gas, the permeation rate through the composite membrane was affected by the direction of flow. The directional dependence was negligible for the other gases.     

Electrodeposition of smooth and adherent film of polypyrrole on lead electrode

Electropolymerization of pyrrole on lead substrate electrode was studied. Due to electrochemical activity of Pb in acidic media, this process is only possible at basic pHs. For this purpose, electropolymerization process was performed in an aqueous solution of Na₂SO₄ with pH 12. Potentiodynamic cycling shows the Pb oxidation at the first cycles. In subsequent cycles, polypyrrole film grows on the oxidized lead substrate. Of course, as the passive film is highly porous, a composite of polypyrrole/PbSO₄ is formed in the first layers. However, subsequent cycling leads to the formation of pure polypyrrole film. According to this structure and strong connection of the polymer film to the substrate surface via this composite layer, the polypyrrole film deposited on the lead surface has enhanced mechanical stability. AFM measurements showed peculiar smoothness of both composite and lateral polypyrrole films. This synthesis approach is of particular interest for the preparation of highly stable polymer films and fabrication of supercapacitors with a polymer/PbSO₄ conductive structure.     

Electrochemical capacitance of well-coated single-walled carbon nanotube with polyaniline composites

Well-coated single-walled carbon nanotube (SWNT) with polyaniline (PANI) composite electrodes with good uniformity for electrochemical capacitors are prepared by the polymerization of aniline containing well-dissolved SWNTs. The capacitance properties are investigated with cyclic voltammetry, charge-discharge tests and ac impedance spectroscopy. The composite electrode shows much higher specific capacitance, better power characteristics and is more promising for application in capacitor than pure PANI electrode. The effect and role of SWNT in the composite electrode are also discussed in detail.     

1991—1992国外工程塑料进展

介绍了1991～1992年国外工程塑料研究和生产概况。论述了通用工程塑料、特种工程塑料和聚合物合金的研究开发、改性和应用方面的进展。且指出工程塑料发展趋势和特点;对复合材料技术进展作了较详尽的分析与阐述。     

ASPECTS OF JOINT DESIGN AND EVALUATION IN THICK-ADHEREND APPLICATIONS

Structural adhesives are gaining wide recognition by industry as they offer engineering designers greater flexibility to achieve economic and technical advantages. In the marine industry there are potential applications for adhesives in various types of construction, for example, thick steel and composite adherends, (typically 5-15 mm thick). The applications include panels and large pipes. This article is largely concerned with the use of two-part epoxy adhesives. The purpose of this article is to understand and evaluate the weaknesses of adhesives and adherends, in relation to specific applications and to use design and material selection to alleviate them. This understanding can be extended to other thick adherend applications. This article will also highlight the impact of structural epoxy adhesive technology on the design and fabrication of steel, composite, and hybrid constructions. The benefits and inherent limitations that can accrue are quantified through three case studies related to thick adherend connections.     

热塑型聚氨酯复合体系力学性能研究

采用压延机，在加工温度不高于１２０°Ｃ的条件下，成功地制备出热塑型聚氨酯弹性体（ＴＰＵ）与高氯酸铵、铝粉及增塑剂邻苯二甲酸二丁酯（ＤＢＰ）等组成的复合胶片，拉伸实验结果指出了所制备的热塑性弹性体复合体系具有良好的力学性能，完全达到或超过推进剂体系的要求指标。     

无卤阻燃高抗冲聚苯乙烯的研制

研究了纳米改性氢氧化铝（CG-ATH）、改性聚苯醚（MPPO）和红磷母料对高抗冲聚苯乙烯（HIPS）的阻燃作用及SBS对所得阻燃材料的增韧作用，得到了具有良好阻燃性能和物理机械性能的复合材料。结果表明，CG-ATH和MPPO与红磷母料之间有很好的协效阻燃作用，配合使用可以使HIPS的垂直燃烧达到FV-0级，氧指数达到27．5％，但是所得复合材料的冲击强度较低。SBS对复合材料有很好的增韧作用，可以使冲击强度提高一倍以上，并且不影响复合材料的阻燃性能。     

Fabrication of SiO2-ZrO2 composite fiber mats via electrospinning

(1 − x)SiO₂-(x)ZrO₂ (x = 0.1, 0.2) composite fiber mats were prepared by electrospinning their sol-gel precursors of zirconium acetate and tetraethyl orthosilicate (TEOS) without using a polymer binder. The electrospun composite fibers were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FT-IR) and mercury porosimetry. The composite fibers having a tetragonal crystalline ZrO₂ were obtained by calcining the electrospun composite fibers at high temperatures. The results show that the structure and crystallization of ZrO₂ in the composite fibers can be controlled by sintering temperature, while the porosity and morphology of the fiber mats did not depend on the sintering temperature.     

Organic–silicate hybrid catalysts based on various defined structures for Knoevenagel condensation

Two types of organic–inorganic hybrid base catalysts are prepared. Organic-functionalized molecular sieves (OFMSs), particularly “amine-immobilized porous silicates”, are designed based on common idea to immobilize catalytic active sites on silicate surface. Silicate–organic composite materials (SOCMs), such as “ordered porous silicate–quaternary ammonium composite materials”, are the precursors of ordered porous silicates obtained during the synthesis. Both the OFMS and the SOCM are used as the catalysts for Knoevenagel condensation. Among the OFMSs, there is clear tendency that the use of molecular sieve with larger pore volume and/or surface area gives the product in higher yield. Aminopropylsilyl (AP)-functionalized mesoporous silicates such as AP-MCM-41 gives the product in high yield under mild conditions. No loss of activity is observed after repeated use for three times. The SOCMs are also active for the same reaction. The precursors of the mesoporous silicates are more active than those of microporous silicates. This material can be repeatedly used without significant loss of activity. High activity is not due to the leached species. The active sites of the SOCM catalysts are considered to be SiO⁻ moieties located on the pore-mouth. Activity of the SOCM increases when the reaction is carried out without solvent, whereas decrease in activity of the OFMS is observed in the solvent-free system.