Thermal stability behaviors of Cr(N,O)/CrN double-layered coatings by TGA/DTA analysis

In this study, Cr(N,O)/CrN double-layered coatings were synthesized using the cathodic arc deposition (CAD) process. CrN film was first deposited onto a substrate as an interlayer to ensure better adhesion, and Cr(N,O) film was subsequently deposited on top of the CrN layer as the surface layer. Variation in the Cr(N,O) coating composition was achieved through changing the O₂/N₂ flow ratio during the last stage of processing. Phase structure, chemical composition, and morphology of the resulting coatings were analyzed and observed using the X-ray diffractometer, Auger electron spectrometer and SEM. In addition, oxidation behavior of the coatings was investigated using TGA/DTA methods. The tests were carried out by increasing temperature up to 1000 °C in ambient air. With the introduction of oxygen gas during the CAD process, a superficial layer was produced in the Cr(N,O) constituent containing CrN and Cr₂O₃ phases. The formation of the oxide phase attributed to the reaction of chromium and oxygen was more favorable than that of chromium and nitrogen. The results also showed that Cr(N,O)/CrN double-layered coatings exhibited superior oxidation resistance at elevated temperature than that of CrN single-layer coated specimen (870 °C vs. 750 °C).     

3Cr2W8V钢锻件表面裂纹的成因及预防措施

通过对难变形钢3Cr2W8V进行实验,证明了合理地选择锻造工艺参数,也是解决表面裂纹的重要途径之一。     

金属型铸造高铬白口铸铁磨球的复合变质处理研究

研究了复合变质处理对金属型铸造的高铬格白口铸铁磨球组织及性能的影响。结果表明，采用ＲＥ、Ｂ、Ｖ、Ｔｉ元素复合变质处理，可有效细化磨球结晶组织，改善碳化物的形态与分布，并显著提高冲击韧性和耐磨性能。     

利用"正火液"作为高铬铸铁磨球淬火介质的生产实践

高铬铸铁件在没有添加贵重元素的条件下,利用"正火液"配入适量的水作为淬火介质进行了试验和生产.实践证明,产品在热处理淬火时从未发生炸裂现象,同时完全达到了要求的力学性能指标.生产的锤头其使用寿命为高锰钢的6～8倍,为低铬白口铸铁的4～6倍.     

00Cr17Ni14Mo2不锈钢的性能及应用研究

研究了00Crl7Nil4M02不锈钢材料的机械性能、焊接性能和耐腐蚀性能，从用户和研究开发的角度探讨了其在压力容器、化工装置、化肥装置、海洋装置和建筑业等领域的应用。     

ZG3Cr18Ni25Si2耐热钢熔炼工艺的改进

介绍了改进后的ZG3Cr18Ni25Si2耐热钢熔炼工艺及特点，它具有较高的合金元素收得率，铸件的使用寿命比改进前延长了35％－45％。     

Cr3Si／Crl3Ni5Si2金属间化合物合金组织与高温滑动磨损性能的研究

利用水冷铜模激光熔炼炉制得了由初生枝晶Cr3Si和枝晶间Cr3Si／Crl3Ni5Si2共晶组成的金属间化合物合金。利用OM，SEM，TEM，EDS和XRD分析了该金属间化合物的显微组织，在400℃，500℃和600℃条件下测试了其耐磨性能。结果表明，由于Cr3Si和Crl3NisSi2硬度高、原子键合力强、组织细小、均匀，在高温滑动磨损条件下具有优良的耐磨性能。     

铝合金型材热挤压模具的热处理

根据铝合金型材热挤压模具的工作条件及失效形式，通过试验，采用硼、碳、氮共渗并淬火、回火处理，来提高其使用寿命，获得了良好的效果。     

Oxidation Mechanism of Ni—20Cr Foils and Its Relation to the Oxide-Scale Microstructure

The oxidation behavior of Ni—20Cr foils of 100- and 200-m thickness wasstudied in air between 500 and 900°C. Simultaneously, the morphology,microstructure, and composition of the oxide layers were determined byscanning and transmission electron microscopies. Depending on thetemperature, the oxide layer differed significantly. The scale formedat all temperatures was complex, with an outer NiO layer having columnargrains, and an inner layer of equiaxedNiCr₂O₄+NiO+Cr₂O₃ grains. At low temperatures (500 and 600°C),the chromium content was insufficient to form a continuousCr₂O₃ layer, while such a continuous layer formed at theinner interface at oxidation temperatures of 700 to 900°C. At 600°C,internal oxidation of chromium occurred in the substrate. The oxidationmechanism is described taking into account these morphologies and theoxidation kinetics. The observation of no significant differences betweenthe oxidation behavior of thin strips and thick materials is related to thelimited exposure times of the study.     

12Cr2Ni4MoVNb钢热处理工艺参数的研究

通过对12Cr2Ni4MoVNb钢锻件的热处理工艺试验研究,重点进行了晶粒长大倾向、奥氏体化温度、奥氏体化保温时间、回火温度及回火保温时间对性能的影响的试验工作,分析了各种热处理工艺参数对力学性能的影响,优化了热处理工艺参数并在生产中进行了验证。在限定回火温度并且不损失塑韧性的前提下可以使σ_b和σ_(0.2)满足订货条件要求:σ_b≥90OMPa、σ_(0.2)≥60OMPa。