压铸条件和淬火时效对GD—AlSi9Cu3合金力学性能的影响

通过改变压铸工艺参数和淬火时效，测定在静态载荷和动态循环载荷下ＧＤＡｌＳｉ９Ｃｕ３合金的力学性能和断裂力学性能，试验所获得的数据可用来估算压铸件的失效风险率     

Crack initiation and propagation induced by inclusions in a nickel-base P/M superalloy under fatigue load

1 IntroductionRecently the key components in advanced aircraftengines are widely made of nickel-base P/M super-alloy. However, non-metallic inclusions are intro-duced into this material during powder metallurgyprocessing. In industry, although many method…     

300M钢腐蚀疲劳裂纹萌生的超载特性

本文对３００Ｍ钢在空气与３．５％ＮａＣｌ溶液中疲劳裂纹萌生的周期超载和单次超载特性进行了试验研究与理论分析。试验结果表明，３．５％ＮａＣｌ溶液中，单次超载所致腐蚀疲劳裂纹迟滞萌生的迟滞强度远小于周期超载的对应值。３．５％ＮａＣｌ溶液与空气中，超载迟滞强度均随超载比增大或等效应力幅水平的提高而增大，在腐蚀疲劳裂纹萌生寿命估算中，只考虑单次超载的迟滞规律，会得出大大保守的寿命估计，只有将单次超载和周期     

A fatigue-life prediction methodology for notched aluminum-magnesium alloy in gulf seawater environment

Local-strain and linear-elastic fracture-mechanics (LEFM) methodologies have been investigated for prediction of the corrosion-fatigue life of notched components of specially developed Al-2.5Mg alloys exposed to Arabian Gulf seawater environment. Corrosion-fatigue crack initiation life estimates were obtained using strain-life relationships; corrosion-fatigue crack propagation life estimates were obtained using LEFM relationships. The total corrosion-fatigue life was considered to be the sum of the crack initiation and crack propagation lives. Estimated corrosion-fatigue lives were compared with experimentally obtained corrosion-fatigue life data using center-notched specimens of three types of Al-2.5Mg alloys (containing different amounts of chromium) exposed to Arabian Gulf seawater environment. Two notch geometries, a circular notch (K _t= 2.42) and an elliptical notch (K _t= 4.2), were investigated. Good corrosion-fatigue life predictions can be obtained using local-strain and LEFM methodologies by determining the relevant material constants via a few simple fatigue tests on smooth specimens and a few crack-growth-rate tests in the environment at the frequency of interest.     

单塔汽提水罐开裂原因分析及解决对策

单塔汽提装置原料水罐产生腐蚀裂纹的原因分析判断为低温HCN-H2S-H2O环境下的硫化物应力腐蚀开裂,根据腐蚀成因制定了合理的焊接补焊工艺;涂料防护施工的重点在于表面处理,喷砂后用面粘效果理想且节约施工时间,可延长涂层寿命。     

低冲击条件下凝聚炸药延迟起爆现象的研究进展

描述了凝聚炸药在低强度冲击作用下的延迟现象XTD介绍并分析研究XDT现象的试验和数值模拟方法，提出了XDT研究的发展方向。     

PBX炸药细观损伤的实验研究

为研究PBX炸药在冲击作用下的物理损伤、化学损伤及成热的物理机制,采用炸药爆炸驱动隔板实验技术对PBX炸药进行了冲击压缩实验,回收炸药试样并对其不同位置处的断面形貌进行SEM分析.结果表明,随着冲击能量的增加,其温度效应的影响越来越显著,损伤模式从物理损伤向化学损伤过渡.这为XDT问题中的"热点"形成机制等研究提供了实验基础.     

气相色谱-质谱法联用定性2,2-二羟甲基丁醛

应用气-质谱联用法。并结合质谱解析及化学合成，探讨了2，2-二羟甲基丁醛的裂解方式。确定了该物质的质谱谱图。     

蒎烷氧化反应机理及动力学研究

分别推导了单分子退化支化引发和双分子退化支化引发时的动力学模型，并根据实验数据对两种模型进行了分析。结果表明：在蒎烷氧化反应中，认为单分子退化支化引发为主的模型假设是合理的，根据这一机理，建立了相应的动力学模型，并由实验得到了相关的动力学参数。     

浅析SRT-Ⅳ裂解炉炉管弯曲及断裂原因

主要分析计算了裂解炉炉管受力情况，进而得出结论：裂解炉自身结构的相互约束力和炉管渗碳是导致炉管弯曲、断裂的主要原因，并提出了相应的解决措施。