降低玻璃钢产品的收缩及变形的实验研究

本文介绍了如何通过控制原材料的选用、玻璃钢产品的成型工艺、加入填料、模具结构设计来最大限度的减少铁路客车用玻璃钢(FRP)产品的收缩及变形。     

复合材料夹层结构产品固化变形分析

本文讨论产生复合材料产品固化变形的主要原因是树脂收缩引起的各方向上不同的线膨胀系数具体分析了复合材料夹层结构的的固化变形，经技术上的改进解决了固化变形，以满足产品的设计要求。     

地层主曲率在研究储层裂缝发育中的应用

曲面曲率的几何意义可以反映曲面一点邻近区域的具体形态和变形特征,因而可以用主曲率法来评价和预测油气储层裂缝分布和发育程度,应用这种方法对泌阳深凹陷中心安棚鼻状构造带进行了评价。研究结果表明,采用主曲率法预测的结果与地质解释、钻井和测井资料吻合较好,具有很好的应用前景。     

软土地基油罐底板变形分析

分析了造成油罐底板变形的原因、形式及其危害，结合工程实例，提出了减少油罐底板不均匀变形的措施。     

Particle-Substrate Collisions, Particle Rebound and Removal

Recent progress in particle capture and rebound and its effect on the adhesion force is reviewed in this paper. Particles rebound when the incident velocity is greater than a characteristic critical velocity. Lower impaction velocity particles experience elastic and plastic deformation. Recent models for particle rebound and capture are discussed and evaluated in terms of their restrictive assumptions and results. Recent experimental data of particle rebound and capture is also discussed, as is the hydrodynamic removal of captured particles. The removal of particles occurs when the applied hydrodynamic removal force overcomes the adhesion force. The effect of adhesion-induced deformation on the removal of particles is introduced and discussed.     

Deformation Dynamics of a Reactive Medium During Gasless Combustion

Deformation during gasless combustion of 5Ti + 3Si and Ti + C samples was studied experimentally. The dynamics of motion of the material in a gasless combustion wave was studied using highspeed video recording (500 frames/sec) with a spatial resolution of the order of 10 m. It was shown that behind the combustion front, the medium was first expanded and then compressed. The dimensions of the expansion and compression zones were determined.     

Augment low-field intra-operative MRI with preoperative MRI using a hybrid non-rigid registration method

Background

Preoperatively acquired diffusion tensor image (DTI) and blood oxygen level dependent (BOLD) have been proved to be effective in providing more anatomical and functional information; however, the brain deformation induced by brain shift and tumor resection severely impairs the correspondence between the image space and the patient space in image-guided neurosurgery.

Method

To address the brain deformation, we developed a hybrid non-rigid registration method to register high-field preoperative MRI with low-field intra-operative MRI in order to recover the deformation induced by brain shift and tumor resection. The registered DTI and BOLD are fused with low-field intra-operative MRI for image-guided neurosurgery.

Results

The proposed hybrid registration method was evaluated by comparing the landmarks predicted by the hybrid registration method with the landmarks identified in the low-field intra-operative MRI for 10 patients. The prediction error of the hybrid method is 1.92 ± 0.54 mm, and the compensation accuracy is 74.3 ± 5.0%. Compared to the landmarks far from the resection region, those near the resection region demonstrated a higher compensation accuracy (P-value = .003) although these landmarks had larger initial displacements.

Conclusions

The proposed hybrid registration method is able to bring preoperatively acquired BOLD and DTI into the operating room and compensate for the deformation to augment low-field intra-operative MRI with rich anatomical and functional information.     

基于Gabor多尺度空间的不变兴趣点检测

针对以往仿射不变兴趣点的特征尺度不能直接断定的问题, 提出一种基于Gabor多尺度空间的不变兴趣点检测算法。该算法主要包括三个步骤：应用Gabor滤波器组与图像卷积建立图像Gabor多尺度空间; 通过极大值准则检测兴趣点并直接断定特征尺度; 采用二阶矩矩阵描述兴趣点局部结构。实验结果表明, 相比较其他Hessian-Affine、MSER等算法, 该算法在图像模糊和JPEG压缩情况下可重复率和可匹配率均取得最好结果, 是一种能有效直接提取特征尺度的兴趣点检测算法。     

Transient and steady-state deformations and breakup of dispersed-phase droplets of immiscible polymer blends in steady shear flow

Transient and steady-state deformations and breakup of viscoelastic polystyrene droplets dispersed in viscoelastic high-density polyethylene matrices were observed in a simple steady shear flow between two transparent parallel disks. By separately varying the elasticities of the individual blend components, the matrix shear viscosity, and the viscosity ratio, their effects on the transient deformation, steady-state droplet size, and the breakup sequence were determined. After the startup of a steady shear flow, the viscoelastic droplet initially exhibits oscillations of its length in the flow direction, but eventually stretches preferentially in the vorticity direction. We find that at fixed capillary number, the oscillation amplitude decreases with increasing droplet elasticity, while the oscillation period depends primarily on, and increases with, the viscosity ratio. At steady-state, the droplet length along the vorticity direction increases with increasing capillary number, viscosity ratio, and droplet elasticity. Remarkably, at a viscosity ratio of unity, the droplets remain in a nearly undeformed state as the capillary number is varied between 2 and 8, apparently because under these conditions a tendency for the droplets to widen in the vorticity direction counteracts their tendency to stretch in the flow direction. When a critical capillary number, Ca_c, is exceeded, the droplet finally stretches in the vorticity direction and forms a string which becomes thinner and finally breaks up, provided that the droplet elasticity is sufficiently high. For a fixed matrix shear stress and droplet elasticity, the steady-state deformation along the vorticity direction and the critical capillary number for breakup both increase with increasing viscosity ratio.     

In situ visualization of drop deformation,erosion, and breakup in high viscosity ratio polymeric systems under high shearing stress conditions

In this paper, deformation and breakup under simple shear of single molten polymer drops in a polymer matrix were investigated. Flow visualization was carried out in a Couette‐Flow apparatus under relatively high shear rates and temperatures up to 230°C. Drop/Matrix combinations were composed of polystyrene drops of 0.5–0.6 mm in diameter in polyethylene matrix, and ethylene–propylene copolymer drops of approximately the same size in polypropylene matrix. The deformation and breakup processes were studied under steady state and time‐dependent shearing conditions. Either for steady state or time‐dependant shearing conditions, drop elasticity generated at relatively high shear rates helped the drops to align perpendicular to the flow direction, i.e., parallel to vorticity axis. Also, the most striking non‐Newtonian effects for the high viscosity ratio systems were the surface erosion and the drop splitting mechanisms. The particles eroded off the main droplet surface were very fine, in the range of 10–50 μm, and led to a significant reduction in main drop size before its final breakup. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2582–2591, 2006