机床铸件导轨镶铸冷却水管的工艺技术

机床铸件导轨镶铸冷却水管是一项新技术,介绍该技术的试验开发过程、铸造工艺参数的设计、生产过程的铸造工艺规范,本试验开发项目的成功将促进镶铸技术在机床铸件上的应用.     

并联机床发展的历史、研究现状与展望

介绍了并联机床的其本概念和特点.详细地阐述了国内外并联机床的发展历史、现状、研究领域和研究前沿,并对并联机床的发展趋势进行了展望.     

Optimizing the use of dry cutting in rough turning steel operations

The main objective of using cutting fluids in machining operations is the reduction of temperature in the cutting region to increase tool life. However, the advantages offered by cutting fluids have been strongly debated because of their negative effects on the economic aspect, the environment and the health of workers using them. A trend to solve these problems is cutting without fluid, a method named dry cutting, which has been made possible due to technological innovations. This work aims to seek conditions in which dry cutting is satisfactory compared with the flood of fluid (called here wet cutting) usually used. Aiming at this goal, several experiments were carried out varying parameters such as cutting speed, feed, depth of cut and tool material in rough turning of ABNT 1045 steel in dry and wet cutting. The analysis of the results showed that wet turning is, as expected, better for tool life. The second conclusion is that dry cutting cannot be used with large depth of cut. But the main conclusion is that, if the tool material is changed to a more wear resistant one, dry cutting can be used with results very similar to those obtained with a flood of fluid.     

高速机床进给系统的发展趋势

在明确了高速加工对机床进给进给系统要求的基础上，比较和分析了滚珠丝杠、直线电机和并联虚拟轴机构等三种高速进给系统的性能、特点、存在问题及其解决办法，指出了它们各自的适用范围和应用前景。     

高速机床电主轴过盈配合量的计算

电主轴是高速机床的核心部件,电机转子与机床主轴间过盈配合量的大小是影响主轴性能的重要因素。本文根据材料力学和弹性力学理论,对电主轴的配合特性进行了分析,分别推导出电主轴在静态和高速运转条件下,主轴过盈量和应力分布的理论公式。最后,根据理论公式计算出ＧＤ－Ⅱ型电主轴的过盈配合量,研究结果表明,采用理论公式设计的过盈配合能较好地满足高速电主轴的需要。     

Investigating the correlation between nano-impact fracture resistance and hardness/modulus ratio from nanoindentation at 25-500 °C and the fracture resistance and lifetime of cutting tools with Ti1−xAlxN (x = 0.5 and 0.67) PVD coatings in milling operations

A novel laboratory technique, nano-impact testing, has been used to test Ti_1−xAl_xN (x = 0.5 and 0.67) PVD coated WC-Co inserts at 25-500 °C. Cutting tool life was studied under conditions of face milling of the structural AISI 1040 steel; the end milling of hardened 4340 steel (HRC 40) and TiAl6V4 alloy. A correlation was found between the results of the rapid nano-impact test and milling tests. When x = 0.67 improved resistance to fracture was found during milling operations and also in the nano-impact test of this coating compared to when x = 0.50. The coating protects the cutting tool surface against the chipping that is typical for cutting operations with intensive adhesive interaction with workpiece materials such as machining of Ti-based alloys. The results give encouragement that the elevated temperature nano-impact test can be used to predict the wear and fracture resistance of hard coatings during milling operations. At 500 °C nanoindentation shows there is a lower H/E_r ratio for the PVD coatings compared to room temperature, consistent with reduced fracture observed at this temperature in the nano-impact test.     

基于切削力的铣削加工误差数学模型

针对铣削加工过程中由于工件、设备系统弹性变形以及刀具磨损导致的加工误差进行了分析和研究.提出了以切削分力作为主要参数的由于刀具磨损和工件与机械系统的弹性变形所带来的加工误差的数学模型.     

数控机床主轴无报警故障的检修

以XK71SF数控铣床、XHK716加工中心及进口加工中心为例，介绍了数控机床主轴无报警故障的几种检修方法。     

数控机床位置伺服在线调试与动态性能分析研究

介绍一种在数控机床位置伺服系统在线调试中应用系统动态性能分析方法的基本原理，给出了一种位置伺服系统动态响应曲线、动态性能分析及其主要技术指标的实例。     

翅片模开条子模结构的优化设计

针对翅片模开条子模制造周期长、拆卸不便、片形不容易调整、精度很难保证等问题 ,通过对原模具结构的探讨与分析 ,设计出1副结构合理、拆卸方便、尺寸位置精度很好保证、开条刀间隙很容易调整的开条子模 ,解决了原模具存在的问题