核测井仪器中的磁屏蔽研究

核测井仪器受套管剩磁的影响比较严重，常常用在探测器的周围缠绕多层坡莫合金带的方法进行磁屏蔽，由于缠绕的坡莫合金圆筒不能闭合，加上缠绕过程中坡莫合金带的形变造成材料本身磁导率的下降，传统的磁屏蔽方法的效果不好。本文介绍一种简单易行、磁屏蔽效果较好的方法，实验的结果说明用电工纯铁做探测器的外壳可以达到令人满意的效果。     

长25-29井卡钻事故的处理

长２５－２９井在完井阶段通井过程中发生粘附卡钻事故，在处理卡钻过程中又发生卡套铣筒、井漏、溢流等事故及复杂情况。通过对井下情况的认真分析，采取先堵漏后循环再解卡的处理方案，顺利地解除了该次卡钻事故，大大地减少了经济损失。     

钻杆接头螺纹退刀尺寸对接头寿命的影响

钻杆接头螺纹退刀尺寸是指外螺纹接头的台肩面到螺纹消失前第一个完整螺纹之间的距离。GB9253．1－88规定退刀尺寸应小于或等于12．7mm内螺纹，钻杆接头内螺纹的锤孔尺寸为16±2mm，以保证内、外螺纹啮合良好。经检测发现，从日本NKK公司进口的所有φ127mm钻杆接头外螺纹退刀尺寸都大于12．7mm，镗孔尺寸为16～18mm。而APISpec7K规定钻杆接头内螺纹最小镗孔尺寸为15．9mm。鉴于此，建议对我国的有关标准作相应修改，与API标准保持一致。     

面向对象系统中的特性表机制与复合对象

本文主要讨论特性表机制与复合对象的概念、功能及实现．在基于知识的面向对象系统中引入特性表机制与复合对象概念的目的在于增强系统的知识表达能力．文中提出的特性表机制包括了三种类型的特性说明表：类说明特性表、继承关系特性表和变量特性说明表．复合对象在系统中是通过引入一个称为“影子类”的新概念来构造和实现的．     

Ti,N,Mg对M2高速钢凝固组织和硬度的影响

为了改善Ｍ２高速钢共晶碳化物的分布，本文利用小凝固试样变质的方法研究了Ｔｉ，Ｎ和Ｍｇ对Ｍ２高速钢凝固组织和硬度的影响。试验结果表明，加入Ｔｉ或Ｔｉ－Ｎ后，共晶碳化物形态和分布有很大改善，而加入Ｔｉ－Ｎ后对凝固组织有轻微的细化作用，但只添加Ｔｉ不补碳时，钢的淬火硬度和回火硬度均下降；加入适量的Ｍｇ可以使片状的Ｍ２Ｃ型共晶碳化物转为鱼骨状的Ｍ６Ｃ型共晶碳化物，使其分布有所改善，Ｔｉ和Ｍｇ复合加入可以明     

数控加工的基本坐标系和对刀问题

数控加工中的对刀问题影响机械加工的各个方面。这里从介绍数控机床的基本坐标系出发，重点阐述了对刀的基本原理和方法以及常见数控机床对刀问题的处理。     

升深2-17井络合铝聚合物充气钻井液现场试验

为加快徐加固子深层天然气的勘探开发步伐，缩短深层气井的建井周期，在升深2-17井进行了充气钻井试验。介绍了络合铝聚合物充气钻井液技术的现场应用概况及效果以及井漏的发生与处理过程、钻井液起泡的解决措施。在现场试验过程中，络合铝聚合物钻井液性能稳定，具有较强的抑制性和较好的流变性能，流性指数控制在0．7左右，具有良好的携屑和稳定井壁能力，而且粘度较低，基本上控制在33～52s之间，满足了现场充气和脱气的需要；该钻井液抗温可达180℃，润滑性能较好，在钻井过程中无粘卡显示，在深井欠平衡井眼稳定方面取得了较好的效果；在不同的气液比条件下，可以在0．83～1．08g／cm。之间实现对当量密度的调节;与常规钻井工艺相比，充气钻井可以使机械钻速提高30％～50％；在钻进过程中实现了充气和点火同时进行，达到了欠平衡钻井工艺技术的要求，为进一步开展气体钻井打下了良好的基础。     

Gorillas (Gorilla gorilla) and Orangutans (Pongo pygmaeus) Encode Relevant Problem Features in a Tool-Using Task.

Two important elements in problem solving are the abilities to encode relevant task features and to combine multiple actions to achieve the goal. The authors investigated these 2 elements in a task in which gorillas (Gorilla gorilla) and orangutans (Pongo pygmaeus) had to use a tool to retrieve an out-of-reach reward. Subjects were able to select tools of an appropriate length to reach the reward even when the position of the reward and tools were not simultaneously visible. When presented with tools that were too short to retrieve the reward, subjects were more likely to refuse to use them than when tools were the appropriate length. Subjects were proficient at using tools in sequence to retrieve the reward. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Simulation and optimization of tool-life in manufacturing centers

This paper presents the development of an optimization and a computer-simulation model to evaluate the process plans of a manufacturing center by analyzing the effect of tool failure on system performance. The GPSS/PC simulation program that is used in this study has been built with variables, functions and matrices so that many experiments could be conducted with the model. Sensitivity analysis is presented and the developed model has proven to be useful in determining optimum sequencing of parts for various operating policies.     

Programming tool-use actions.

When humans plan to execute a tool-use action, they can only specify the bodily movement parameters by taking into account the external target or goal of the tool-use action and the target-movement mapping implemented by the tool. In this study, the authors used the movement precuing method to investigate how people prepare for actions made with tools. More specifically, they asked whether people would be able to specify the spatial target and the target-movement mapping of the tool-use action independently of each other, and to what degree they would be able to prepare these components in advance. In 3 experiments, they precued either the target or the target-movement mapping of tool-use actions involving either a compatible or an incompatible target-movement mapping. Results indicate that participants benefit from partial advance information about the target-movement mapping, whereas no significant effects were found for precuing the spatial target of the action. These results occurred regardless of whether the target-movement mapping was compatible or incompatible and provide evidence for the notion that the target-movement mapping of a tool-use action is part of its cognitive representation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)