汽车涂料使用的颜料（Ⅰ）

汽车涂料是一种高质量涂饰剂，其制造必须要使用一些具有多方面优良性能的高级颜料。本文对汽车涂料使用的各色颜料的选择作以推荐。     

Experimental study on temperature stress calculation and temperature control optimization of concrete based on early age parameters

Temperature control curve is the key to achieving temperature control and crack prevention of high concrete dam during construction,and its rationality depends on the accurate measurement of temperature stress.With the simulation testing machine for the temperature stress,in the present study,we carried out the deformation process tests of concrete under three temperature curves：convex,straight and concave.Besides,we not only measured the early-age elastic modulus,creep parameters and stress process,but also proposed the preferred type.The results show that at early age,higher temperature always leads to greater elastic modulus and smaller creep.However,the traditional indoor experiments have underestimated the elastic modulus and creep development at early age,which makes the calculated value of temperature stress too small,thus increasing the cracking risk.In this study,the stress values of the three curves calculated based on the strain and early-age parameters are in good agreement with the temperature stress measured by the temperature stress testing machine,which verifies the method accuracy.When the temperature changes along the concave curve,the law of stress development is in consistent with that of strength.Under this condition,the stress fluctuation is small and the crack prevention safety of the concave type is higher,so the concave type is better.The test results provide a reliable basis and support for temperature control curve design and optimization of concrete dams.     

一种基于并联机构的航天器姿态模拟装置的设计开发

航天器发射升空前进行地面测试和试验是航天器研制过程中的重要环节。文中针对一种基于并联机构的姿态模拟装置的设计开发,从位置分析、速度分析和虚拟样机的建造和仿真分析等方面对3UPS-PU并联机构进行研究,完成姿态模拟装置的设计,为航天器装配、试验和测试设备的设计提供一种新的思路。     

全媒体时代新闻学专业实践教学模式的研究

全媒体时代,需要全媒体型新闻传播人才。新闻学专业教育者,要顺应时代要求,转变教育、教学观念,不断探索教学模式,加大实践教学内容比重,使课堂理论知识和实践教学环节相融合。营造多层次的实践平台,注重单项实践与综合实训相结合,增加"双师型"的教师比例,提高实践教学质量。     

“顶岗置换”模式培养高师准幼儿教师的探讨

＂顶岗置换＂模式不仅促进了一线学前教师的职后培训,更有利于高师准幼儿教师的培养;同时,＂顶岗置换＂对高师准幼儿教师的培养提出了相应的挑战：顶岗对学生的高要求——能否从学生变为教师,顶岗对学生的低回报——能否从教中学。提出相应策略,促进＂顶岗置换＂模式下准幼儿教师的培养。     

本科生导师制激励问题研究

运用博弈论的分析方法解释本科生导师制在推行过程中遇到的激励问题。通过构建一个非对称信息的静态模型,发现导师指导学生的努力程度将取决于学校的惩罚力度、考核成本以及该制度给学校带来的收益,而学校对教师指导情况的考核概率则主要受到其制定的奖惩规则和教师科研水平的影响。     

A global cutter positioning method for multi-axis machining of sculptured surfaces

Traditional cutter positioning methods have defects of global errors and incomplete optimization. Because of using local differential geometry and focusing on the cutting contact point, these defects cannot be avoided and will deteriorate accuracy in precision machining. The authors presented the conception of actual cutting edge of a toroidal mill which was extended from cutting contact point, and pointed out its importance in programming. Instantaneous cutter position error (ICPE) was also investigated. A new global method based on the ICPE curve was presented. Taking the relationship between surface and cutter into consideration thoroughly, this global method shows many advantages which have been verified by simulation and cutting tests.     

低成本改造焊管定尺锯切系统

介绍了一项低成本改造焊管定尺锯切系统的技术。该技术以PLC为控制中心,旋转编码器、接近开关为检测元件,采用机电结合的方法,解决了老式焊管定尺锯切系统普遍存在的定尺不准、可靠性差等问题。新系统控制可靠,工作稳定,定尺误差为±5mm,改造成本2万元左右,能够满足生产的需要。     

High temperature corrosion mechanisms and effect of alloying elements for materials used in waste incineration environment

Corrosion products on two typical materials, SA213-T12 steel and alloy 625 exposed to the actual combustion gas, were analyzed in addition to laboratory tests for penetration of corrosive matter. It has been clarified that corrosion products of oxides containing a little chlorides and sulphides show lamellar structures and that at the alloy-scale interface, chlorination, sulphidation, and oxidation occur under a low P_O2-high P_Cl2 condition. The formation of scale structures and the effect of corrosion-resistant alloying elements can be explained according to the stability tendencies of metals, chlorides, and oxides in the M-Cl-O equilibrium diagrams. The severity of corrosion environments at the interface is influenced by the penetration extent of corrosive matters through deposits and scales, and the protective effects of oxide films derived from alloying elements play an important role in preventing the corrosion. On the other hand, it has been shown that thermal fluctuation characterized in this kind of environment makes the lamellar scale structures and sometimes breaks and peels off the scale, and thus accelerates the corrosion. On the basis of the above mentioned knowledge, a new corrosion model is presented.     

混合室分配板成形工艺及模具设计

对混合室分配板零件介绍了一种落料拉伸成形和立体切沿分割的工艺思路以及模具结构和相关的理论计算 ,在实际应用中获得了好的效果。对同类形状产品 ,尤其是涉及到需要进行立体切沿分割的制件 ,可提供借鉴。