PPS：基于PROSITE数据库检索蛋白质功能位点的计算机程序

用标准Ｃ语言在ＩＢＭ－ＰＣ兼容微机上开发了基于ＰＲＯＳＩＴＥ数据库检索蛋白质序列功能位点的ＰＰＳ程序，ＰＲＯＳＩＴＥ是Ｂａｉｒｏｃｈ建立的蛋白质功能位点或结构模式的资料库，为蛋白质序列分析和结构功能研究提供了新工具。     

发光二极管的研究现状与发展趋势

Ⅱ－Ⅵ族，Ⅲ－Ⅴ族化全物半导体是制作显示器件的重要材料，随着制作工艺日趋成熟，发光二极管已广泛地应用于 民经济各部门。要方要介绍了国内外发光二有管的研究两头和发展趋势。     

Peculiarities of erosion-corrosion processes

Investigations have been carried out on an erosion-corrosion apparatus to investigate the behaviour of corrosion-resistant highalloy iron-base materials containing hard phases. These materials had been optimized for increased wear resistance under complex stress conditions. As expected, in dry erosion tests, very low mass losses were established; there was little difference between the materials. Also, in corrosive environments (NaCl, H₂SO₄), the materials showed good stability; however, the duplex structures were superior to the martensitic ones. The combination of erosion and corrosion produced large differences and, in some cases, markedly reduced resistance to damage. These results confirmed observations that it is impossible to deduce the environmentally influenced mechanical behaviour of an alloy from its behaviour in separate corrosion and erosion experiments. The basic mechanisms underlying these processes have been investigated only tentatively.     

方块电阻测试中的有限元理论

介绍了用有限元方法计算半导体方块电阻四探针测试中二维点电流势场的模型并且证明了其正确性。由于有限元方法对边界没有限制，该方法为方块电阻测试中精确确定边界修正系数，更重要的是为微样品测试结构确定提供直接明了的理论依据。     

A semi-analytic boundary element method for parabolic problems

A new semi-analytic solution method is proposed for solving linear parabolic problems using the boundary element method. This method constructs a solution as an eigenfunction expansion using separation of variables. The eigenfunctions are determined using the dual reciprocity boundary element method. This separation of variables-dual reciprocity method (SOV-DRM) allows a solution to be determined without requiring either time-stepping or domain discretisation. The accuracy and computational efficiency of the SOV-DRM is found to improve as time increases. These properties make the SOV-DRM an attractive technique for solving parabolic problems.     

微量Ag对CP276合金性能和组织的影响

研究添加不同含量的Ａｇ对ＣＰ２７６合金的拉伸性能和时效组织的影响。对拉伸强度、延伸率测试及透射电镜观察表明：０．１１ｗｔ％加入可促进Ｔ１相析出，使合金强度值升高；０．３５ｗｔ％Ａｇ的加入可在时效前期生成富Ａｇ、Ｍｇ的稳定的ＧＰ区，从而降低合金中Ｃｕ的固溶度，阻碍Ｔ１相析出，时效后期，ＧＰ区分解，生成大量Ｔ１相，使合金强度值显著升高。     

A Survey of Inverse Surface Design From Light Transport Behavior Specification

Inverse surface design problems from light transport behavior specification usually represent extremely complex and costly processes, but their importance is well known. In particular, they are very interesting for lighting and luminaire design, in which it is usually difficult to test design decisions on a physical model in order to avoid costly mistakes. In this survey, we present the main ideas behind these kinds of problems, characterize them, and summarize existing work in the area, revealing problems that remain open and possible areas of further research.     

激光辐照对不同饵料微藻生长的影响

利用Nd:YAG激光(波长1.06μm,功率5W,照射时间0.5-3min)和Ar 激光(波长:488nm,功率70mw,照射时间5-20min)分别照射角毛藻和叉鞭金藻,辐照后进行细胞增殖和生长速率的测定。实验结果表明:照射剂量为1min的Nd:YAG激光及剂量为5min的Ar 激光对叉鞭金藻有较明显的促长效果,这两种激光处理组的细胞增殖量在辐照后的两天内较对照组分别高42.9%和48.1%,但这种促长效果随时间的推移逐渐消失。不同剂量的两种激光辐照角毛藻后,在延滞期均出现生长抑制现象,但进入指数生长期或传代培养后,剂量为1min的Nd:YAG激光及剂量为10min的Ar 激光对角毛藻有明显的促长效果,其中在指数生长期1min剂量的Nd:YAG激光处理可促长27.0%,传代培养后10min的Ar 激光处理组生长速率提高达51.2%。本文对不同激光及不同激光参数条件下,两种饵料藻的耐受性及生长特性的差异也进行分析探讨。本实验结果不仅证实了已有研究的推论,还展示出激光技术在饵料藻种选育中的应用前景。     

Impact of dams on point bar habitat: a case for the extirpation of the Sacramento Valley Tiger Beetle,C. hirticollis abrupta

Quantitative analyses of flow and stage data, remote sensing and geographic information systems analysis, and field studies were used to assess the impact of dams and diversions on the point bar habitat of the Sacramento Valley Tiger Beetle (Cicindela hirticollis abrupta). The reaches of interest include sites of known historic populations of C. h. abrupta along the Sacramento River from approximately 8 km north of Colusa southward to the confluence with the Feather River and along the Feather River between Yuba City and its confluence with the Sacramento River. The results from this study show that construction of two major dams has altered flows such that prolonged and increased flows during summer, fall, and early winter have most likely disrupted life cycles, flooded larvae, drowned overwintering adults and led to high mortality. Additionally, habitat availability has decreased over time because point bars have decreased in number and area causing increased distances between populations and isolation of populations. Moreover, point bar armouring, channel scouring, altered flows, redirected flows through weirs, and lithologic controls have produced a bimodal distribution of mean grain sizes in the Sacramento River in which the more northern bars contain gravel deposits and more southern bars possess fine sands. These conditions negatively alter moisture retention and sediment compaction and, consequently, burrowing conditions needed by this tiger beetle. Additionally, more stabilized flows (reduced variability) and increased fine‐grained deposition have enabled development and encroachment of vegetation onto the sand bars. Finally, human stresses, such as foot traffic and vehicular traffic may have interfered with burrowing, ovipositing, and foraging. The combination of these stress factors has most likely led to a reduction in source populations and, ultimately, the apparent extirpation of the entire metapopulation. Copyright © 2006 John Wiley & Sons, Ltd.     

长安之星车用空调放大器的反求设计

长安之星空调放大器所具有延时启动、温度控制、过热保护、加速切断、点火控制以及转速控制等功能.该放大器以进口空调放大器为原型,通过其原理、结构及功能的分析,对软件和硬件分别进行反求设计,研制开发出能替代原产品的新产品.该产品硬件采用MDT2005单片机作核心控制,温度和水温采集用LM324实现模数转换,发动机转速经过两级滤波、降压后,再进入LM324作波形整理.MDT2005的8位计数器采用递增方式计数,当计至FFH时自动复零,并重新开始计数,一直循环.程序设计以循环方式与分支处理方式相结合,以实现空调放大器的各种控制功能与技术指标.