Gas-phase residence time distribution in a falling-film microreactor

Industrial-scale performance of gas-liquid reactors can be difficult to optimise for very rapid or highly exothermic reactions. Microstructured reactors for laboratory measurements offer new opportunities for the study of these reactions by enabling precise heat management and fine control of reactor operating conditions. For accurate experimental study, characterisation of the flow conditions within these new reactor devices is essential.The present study examines experimental residence time distributions for the gas phase through a microstructured falling-film reactor, in order to develop an appropriate flow model for further study of gas-phase mass-transfer characteristics in the system. For the gas-phase residence time distribution experiments, the detection system involves a flow of oxygen containing ozone as a tracer gas with continuous monitoring of the concentration by UV-light absorption. The experimental results are used to model the flow behaviour in the gas volume over the gas-liquid contact zone as a series of continuous stirred tank reactors whose number is a simple function of the gas Reynolds number.The experimental results are compared with computational fluid dynamics calculations of the gas flow within the reactor. The comparison indicates a clear correlation of the flow model behaviour with the appearance of recirculation loops in the reaction chamber and the effect of the gas jet at the entrance of the gas-liquid contact zone.     

Vibrational dynamics and heat capacity in syndiotactic poly(propylene) form I

Normal modes of vibration of syndiotactic polypropylene (sPP) and their dispersion are obtained in the reduced zone scheme for helical form I having the conformational sequence (t₂g₂) using Urey-Bradley force field and Wilson's GF matrix method as modified by Higgs. Optically active frequencies corresponding to the zone center and zone boundary are assigned and characteristic features of the dispersion curves are discussed. In general the dispersion in the helical form is less as compared to the planar form. Heat capacity has been calculated via density-of-states using Debye relation in the temperature range 10-460 K and compared with the experimental measurements.     

分散因素对氯乙烯微悬浮聚合的影响及对策

本文对氯乙烯微悬浮聚合中影响氯乙烯分散的诸因素:乳化剂及其助剂,氯乙烯以及分散系统自聚等进行了分析,并针对目前生产中出现的问题提出相应对策。     

基于系统上升时间预算的高速光传输系统设计与仿真

传统光传输系统设计多针对低速率传输系统,单一采用光功率分配预算即可满足系统设计要求。随着光传输速率和光通信容量的不断增加,高速光传输系统受色散影响严重,传统方法无法满足系统可靠性和有效性的要求,需要对系统色散进行补偿。针对系统大容量高速率的需求设计,采取DWDM光传输系统总体设计方案,提出了一种基于光功率分配、传输误码率、系统上升时间和线路色散预算的综合性能评价方法,分析了系统受各种因素的影响,通过系统参数优化选取与仿真设计,给出了系统仿真评估结果。     

接枝梳型高分子的SCF理论模拟

利用Scheutjens—Fleer自洽场（SF—SCF）理论,对表面接枝梳型高分子的体系进行模拟研究。模拟结果表明,柔性梳型高分子主链的链段密度分布仅与支链的总链段数有关,主链随支链链段数目的增加而伸展。当总链段数一定且主链长度相同时,线性高分子表现出较高的接枝率,比接枝的梳型高分子具有更大的分子伸展程度与更厚的接枝层。对于线性高分子的接枝层,提高链长比提高接枝率能得到更厚的接枝层。     

Optical properties of amorphous Ge28-xSe72Sbx thin films

Bulk glasses of formal composition Ge_28−xSe₇₂Sb_x with 0≤x≤28 were prepared by applying the quench technique. The optical transmission spectra—using a melt were measured in the range from 200 to 1200 nm for Ge_28−xSe₇₂Sb_x films which are prepared by thermal evaporation technique. A simple, straightforward procedure suggested by Swanepoel, which is based on the use of interference fringes, has been applied to calculate the film thickness. On other hand the driving absorption coefficient (α), consequently the band tail width E_e and the optical band gap have been estimated. The real (ε′) and imaginary parts (ε″) of the dielectric constant have been determined and the optical band gap can also be calculated as a function of imaginary part (ε″). The dispersion parameters such as E₀(single-oscillator energy), E_d (dispersive energy) and M₋₁, M₋₃ (moments) were discussed in terms of the single-oscillator Wemple–DiDomenico model.     

Dispersion-strengthening effect of Cu-based Mn, Al, and Zn rich alloys

In this systematic study, dispersion-strengthening effect of the Cu–25.91Mn (wt.%), Cu–26.62Mn–8.99Al (wt.%), Cu–22.17Mn–12.32Zn (wt.%) ingot alloys have been investigated. Samples were homogenized at a high fixed temperature in different periods and cooled with different cooling rates. After processes, microanalysis of the samples were interpreted by using scanning electron microscope (SEM) and weight percentages of the elements of the occurrence phases in the samples obtained by using electron dispersion spectroscopy (EDS) technique. Additionally, some characteristic properties of the heat treated samples with different conditions of Cu–Mn, Cu–Mn–Al, Cu–Mn–Zn ingot alloys were also discussed.     

A class of aggregation functions encompassing two-dimensional OWA operators

In this paper we prove that, under suitable conditions, Atanassov’s K_α operators, which act on intervals, provide the same numerical results as OWA operators of dimension two. On one hand, this allows us to recover OWA operators from K_α operators. On the other hand, by analyzing the properties of Atanassov’s operators, we can generalize them. In this way, we introduce a class of aggregation functions - the generalized Atanassov operators - that, in particular, include two-dimensional OWA operators. We investigate under which conditions these generalized Atanassov operators satisfy some properties usually required for aggregation functions, such as bisymmetry, strictness, monotonicity, etc. We also show that if we apply these aggregation functions to interval-valued fuzzy sets, we obtain an ordered family of fuzzy sets.     

常规光纤非线性对色散补偿光纤位置的影响

通过数值计算的方法分析了色散、自相位调制和激光器啁啾等因素对１０Ｇｂ／ｓ１００ｋｍＧ．６５２光纤通信系统的综合效应。对１０Ｇｂ／ｓＧ．６５２光纤系统中用色散补偿光纤（Ｄｉｓｐｅｒｓｉｏｎ Ｃｏｍｐｅｎｓａｔｉｏｎ Ｆｉｂｅｒ,即ＤＳＦ）的两种方案进行了比较,然后简单讨论了色散补偿光纤在密集波分复用（ＤＷＤＭ）中的应用,最后给出通过以上分析得出的结论。     

微粉体聚集颗粒的气流分散研究

采用细长管、孔喷嘴和缩扩式3种分散器分别对滑石粉、高岭土等5种微粉体聚集颗粒进行气流分散研究。建立了气流条件与聚集颗粒分散程度的关系,关联所得计算值与实验值符合程度较好。实验结果表明,孔喷嘴分散器比细长管和缩扩式分散器更有利于实际应用。本文所设计的6级串级碰撞器可便捷地测定微粉聚集颗粒的大小及分布。