Oxygen glow discharge experiment to remove deposited layers and to release trapped hydrogen isotopes in HT-7 superconducting tokamak

An experiment to remove re-deposited layers and to release hydrogen using a glow discharge in oxygen (O-GDC) has been performed in the HT-7 superconducting tokamak. In the absence of magnetic fields, the O-GDC wall conditioning had produced rapid, controlled co-deposit removal. Average removal rates, 5.2 × 10²² H-atoms/h, 5.65 × 10²¹ D-atoms/h and 5.53 × 10²² C-atoms/h, respectively, were obtained during 145 min O-GDC experiment in the pressure range 0.5-1.5 Pa. The corresponding removal rate of co-deposited films was ∼1.19 μm/day (26.5 g/day for carbon) based on an area of 12 m². Compared to thermo-oxidation and O-ICR experiment, high pressure O-GDC wall conditioning promoted the oxidation and improved the C and D atoms removal. In the O-GDC experiment, the removal rates of H-atoms and D-atoms as H₂O, HDO and D₂O were higher than that of H₂ and D₂ by factors of about 20 and 50, respectively. During the 145 min O-GDC experiment, about 14.5% O-atoms were converted into carbon oxides and hydroxides, and about 5.37 × 10²² O-atoms were adsorbed on the walls corresponding to a coverage of 4.5 × 10²¹ O/m² on an wall area of 12 m². In a 100 min helium glow discharge (He-GDC) following the O-GDC experiment, 1.53 × 10²² O-atoms, about 28.5% oxygen retained on the walls, were removed. The removal rate of H-atoms in He-GDC cleaning after O-GDC experiment was lower than that in He-GDC cleaning before O-GDC experiment, which indicates that the O-GDC wall conditioning had effectively reduced hydrogen retention on the walls.     

Pressure infiltration of boron nitride preforms with molten aluminum

The infiltration of compacted cubic BN (cBN) with molten aluminum has been investigated as a potential route for a cheap and easy method of manufacturing cBN/metal composites. CBN compacts have been infiltrated with molten Al at a temperature between 670 and 800 °C and pressure of 15 MPa in vacuum. At these temperatures no pronounced interactions between hexagonal and cubic BN with Al was observed, allowing the complete infiltration of cBN with 12 μm mean grain size. After infiltration at 800 °C, the temperature was increased without pressure to convert aluminum into borides and AlN. The hardness of the resulting materials depends on the content of hexagonal, cubic BN and the rate of conversion of Al into borides and AlN. The infiltration height of less than 1 mm obtained from infiltrating the 3 μm cBN powder green compacts gave a hardness of 22.0 ± 0.6 GPa after heat treatment.     

L波段窄脉宽500W固态功放组件的设计

介绍了作者研制的应用于固态雷达发射机上的L波段500W固态功放组件的工作原理、用途及其主要技术指标。描述了功放组件的设计过程和测试结果。该功放组件在窄脉宽条件下实现了快速上升沿,性能优良,工作稳定可靠。     

Equilibrium Moisture Characteristics of High Oleic Sunflower Seeds and Kernels

The equilibrium moisture content (EMC) characteristics of high oleic sunflower seeds and kernels between 10 and 55°C were determined by equilibrating the samples to known relative humidities (RH) above saturated salt solutions. EMC of the kernels was lower than that of seeds in the range of 11 to 96% ERH and at 25 and 40°C. Hysteresis effect was found for the EMC properties of seeds and kernels at 25°C. Four EMC-ERH models (modified Henderson, Chung-Pfost, Halsey, and Guggenheim-Anderson-de Boer) and their estimated parameters were evaluated for goodness of fit. GAB and Halsey equations showed the best fitting of experimental data although GAB equation adjusted for temperature described the EMC data the best. Components of the seed as oil content or hull/kernel ratio did not explain the slight differences in EMC found between the varieties.     

Formation of ordered microporous films with water as templates from poly(D,L‐lactic‐co‐glycolic acid) solution

Recently a method that uses water droplets at the air–solution interface as an ordered template was reported for the preparation of ordered micrometer‐size honeycomb structures. Here we show that the method can also be used for formation of honeycomb‐like porous films from random copolymers with certain hydrophilicity, besides those polymers with defined structures such as block copolymers, starlike homopolymers, amd amphiphilic polymers. This demonstrates that the stabilization of water droplets is the key factor for the regular structure. Also we indicate that size and structure of the films can be regulated by such variables as concentration and atmospheric humidity. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1846–1850, 2003     

基于Pro/Engineer的标准件库建立技术

通过应用实例，简要介绍了在Pro／Engineer环境下，利用其二次开发工具族表(Family Table)和程序(Program)建立标准件库的方法和技巧。     

水稻花后衰退珠心和胚乳发育初期Ca2+的超微细胞化学定位

应用焦锑酸盐沉淀技术对水稻花后衰退珠心和胚乳发育初期进行了Ca^2 的超微细胞化学定位。结果显示在初始衰退的珠心细胞中Ca^2 主要分布于液泡膜上和核内；在衰退中期的珠心细胞中，Ca^ 主要分布在核膜、液泡膜及质膜上；在严重衰退的珠心细胞，Ca^2 仅存在于液泡中。珠心降解的Ca^2 跨过胚囊壁，通过质外体向胚乳内运输；发育初期的胚乳细胞，Ca^2 主要位于胞间隙，线粒体和液泡中也有少量分布。讨论了Ca^2 与珠心PCD的关系。     

Preparation of core–shell type nanoparticles of diblock copolymers of poly(L‐lactide)/poly(ethylene glycol) and their characterization in vitro

Core–shell type nanoparticles of poly(L ‐lactide)/poly(ethylene glycol) (LE) diblock copolymer were prepared by a dialysis technique. Their size was confirmed as 40–70 nm using photon correlation spectroscopy. The ¹H‐NMR analysis confirmed the formation of core–shell type nanoparticles and drug loading. The particle size, drug loading, and drug release rate of the LE nanoparticles were slightly changed by the initial solvents that were used. The drug release behavior of LE core–shell type nanoparticles showed an initial burst during the first 12 h and then a sustained release until 100 h. The degradation behavior of LE block copolymer nanoparticles was divided into three phases: the initial rapid degradation phase, the stationary phase, and the rapid degradation phase until complete degradation. It was suggested that lidocaine release kinetics were predominantly governed by the diffusion mechanism in the initial burst phase and after that by both of the diffusion and degradation mechanisms. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2625–2634, 2002     

Partitioned half-explicit Runge-Kutta methods for differential-algebraic systems of index 2

A class of half-explicit methods for index 2 differential-algebraic systems in Hessenberg form is proposed, which takes advantage of the partitioned structure of such problems. For this family of methods, which we call partitioned half-explicit Runge-Kutta methods, a better choice in the parameters of the method than for previously available half-explicit Runge-Kutta methods can be made. In particular we construct a family of 6-stage methods of order 5, and determine its parameters (based on the coefficients of the successful explicit Runge-Kutta method DOPRI5) in order to optimize the local error coefficients. Numerical experiments demonstrate the efficiency of this method for the solution of constrained multi-body systems.     

Olfactory recognition of nonhosts aspen and birch by conifer bark beetlesTomicus piniperda andHylurgops palliatus

The field response ofTomicus piniperda (L.) andHylurgops palliatus (Gyll.) (Coleoptera: Scolytidae) to the attractant ethanol in combination with volatile wood constituents released from the nonhost tree speciesPopulus tremula L. (Salicaceae) andBetula pendula Roth (Betulaceae) was studied using flight barrier traps. The attraction of both species decreased when aspen or birch wood was added to the ethanol bait. The same was true forRhizophagus depressus (F.) (Coleoptera: Rhizophagidae), a predatory species associated with conifer bark beetles.Glischrochilus quadripunctatus (L-),Epuraea bickhardti St.-Claire Deville,E. unicolor (Oliv.) (Coleoptera: Nitidulidae), andRhizophagus parvutus (Payk.) (Coleoptera: Rhizophagidae) were caught in higher numbers in traps baited with both ethanol and wood of aspen or birch than in traps baited with ethanol alone. In a separate experiment, landings ofT. piniperda andH. palliatus on nonhosts (black plastic tubes) were demonstrated with sticky traps.