羟基磷灰石涂层人工关节的应用研究

采用人工合成高纯度的羟基磷灰石粉末，喷涂在具有注册证的钛合金和钴铬钼合金人工关节上。通过生物学基础检测、动物实验和临床试用，证明所制作的各种羟基磷灰石涂层人工关节，能诱发骨质生长，起生物固定作用，对治疗丧失功能的骨胳效果甚佳。     

异常高压低渗透地层测试技术的改进

针对异常高压低渗透地层在测试关井恢复过程中出现关井压力外泄的情况，对测试管柱进行了改进，即在P—T封隔器上方组装一个水力锚，水力锚上方组配一个裸眼旁通阀，封隔器和水力锚之间加1—2根油管，并适当增大关井时的加压负荷，较好的解决了关井压力外泄问题，提高了测试一次成功率。     

250W带功率因数校正整流电源模块的研制

功率因数校正技术越来越成为电源行业研究的热点。文中介绍了适用于雷达等设备的250W带功率因数校正整流电源模块的设计，分析了其中升压电感器设计、主开关管保护、控制电路消振、散热设计和表面贴装等关键技术，完成了实验研究，获得了满意的试验结果。     

Ability of a contactless inductive device for the characterization of the critical current versus temperature in superconducting rings at temperatures close to TC

Critical current measurements for three polycrystalline rings of YBCO, three Bi-2223, and one YBCO + Ag were developed from a temperature close to 80 K to the critical temperature using a previously reported contactless inductive device based on the transformer method. These data were used to analyze the ability of this device to characterize, in superconducting rings, the Ginzburg-Landau, Ambegaokar-Baratoff, and De Gennes regimes as well as the crossover temperature between them.     

Investigation on vapor-cooled current leads operating in a pulse mode

This paper describes transient numerical modeling for thermal characteristic of vapor-cooled current leads under pulse operation. The transient thermal analysis considers the temperature difference between a helium gas flow and a copper lead with temperature dependent properties of helium gas, copper and stainless steel. The numerical analysis was validated by an experiment with commercially available 100 A vapor-cooled current leads. A proper overloading factor calculation and the effect of intermediate cooling are presented for the current leads under pulse operation, which can significantly reduce heat input to a cryostat.     

SLIMLINE+K型多功能撬装双滚筒试井绞车简介

SLIMLINE K型多功能撬装双滚筒试井绞车为整体式结构，多用于海上平台，可进行电子压力计和机械压力计试井，以及井下工具的投放、震击、打捞等完井作业。该试井绞车采用先进的数控技术，使起下纲丝／电缆实现自动化控制，该系统能够对斜井、定向井进行随钻测试。     

Low-cycle fatigue properties of eutectic solders at high temperatures

This paper details the deformation mechanism and low‐cycle fatigue life of eutectic solder alloys at high temperature (around 0.8T_m). Grain boundary sliding generally nucleates a wedge‐type cavity that reduces the low‐cycle fatigue life of metals. In this study, grain boundary sliding has promoted intergranular failure contributing to the reduction in fatigue life of Sn–Ag–Cu alloy. However, grain boundary sliding has exerted no deleterious effects on fatigue resistance of eutectic Pb–Sn and Bi–Sn alloys. The phase boundary sliding with very fine microstructure induces exceptional ductility in these alloys leading to superior low‐cycle fatigue endurance for theses eutectic Pb–Sn and Bi–Sn alloys.     

RD取样器及其应用

RD取样器是在APR-M2工具基础上发展起来的专用取样设备，由取样心轴、取样外筒、破裂盘、样品腔几部分组成。与RD安全循环阀配合使用，完全可以替代APR-M2工具，具有取样准确、缩短施工工期，取样过程简单、安全等特点。     

Non-destructive testing of rock bolts using guided ultrasonic waves

The research outlined in this paper is aimed at the development of a portable non-destructive testing instrument for evaluating the condition of rock bolts. In applications such as coal mine roof reinforcement, the opportunities for rock bolt inspection are currently limited to destructive techniques such as the pull-out test. It is proposed that guided ultrasonic waves can be used to solve this inspection problem, using a pulse-echo test carried out from the free end of the bolt. Suitable test frequencies have been identified through the use of modelling software, and successful laboratory and site trials have been undertaken. The research has shown that the proposed approach is capable of determining the bolt length, and of identifying major defects such as necking, deformation, and loss of resin encapsulation.