我国环保产业研究与发展的探讨

在总结我国环保产业研究与发展现状的基础上 ,指出我国环保产业的发展必须得到理论研究的指导 ,并对有关问题进行了深入地探讨。根据我国加入WTO后的环保产业现状 ,预测、分析了将在我国环保产业形成投资热点的几个领域     

CORDIS无机粘结剂的特性与试验

介绍了德国HA公司最新研制的CORDIS无机粘结剂的组成与性能以及应用中的问题。     

宝钢粉煤灰处理利用与展望

介绍宝钢粉煤灰处理利用实现排出量与处理量动态平衡的各项有效措施，并提出进一步拓展利用粉煤灰的途径与措施。     

Impacts of a marine fish farm in Argolikos Gulf (Greece) on the water column and the sediment

The aim of this study was the qualitative and quantitative assessment of impacts on the physicochemical characteristics of the water column and the sediment caused by an intensive marine fish farm. The study area was the Plateia Island which is located in an open seawater area in the outer part of Argolikos Gulf (Northeastern Peloponnese, Greece). The particular plant has been in operation since 1988, producing about 350-400 tons per year of Gilthead seabream (Sparus auratus) and European seabass (Dicentrarchus labrax). The samples were taken on a three-season period started in August 2001 and ended in May 2002. During this study, the main physical and geochemical parameters on the water column and the sediment were investigated. Specifically, the parameters that were measured included: ammonium-nitrogen, phosphate and suspended solids in the water column and organic matter, organic carbon, and phosphorus (total and inorganic) in the sediment samples. The conclusions drawn from this work clearly verify that the most important impacts, mainly identified as increased nutrients and organics concentrations both in the water column and the sediment, were realized at the stations closest to the farm. These concentrations gradually decreased with increasing distance from the cages. The peak values in most of the parameters measured were obtained during summer or spring. However, it has to be mentioned that although the measured concentrations clearly depict the influence of the fish farm especially on the sediment, their values were, in general, considerably lower than those reported in relative studies in Greek fish farms.     

Hybrid systems in seawater desalination—practical design aspects, present status and development perspectives

Ever since seawater desalination has been applied on an industrial scale, and particular in the countries of the Arabian Gulf, the application of desalination processes in dual-purpose facilities—water and power—as a hybrid configuration has been discussed in many feasibility investigations and also planning concepts. It is above all the combination of reverse osmosis with thermal processes that has found increasing interest with the aim of ensuring, as economically as possible, uniform water supplies under the specific, greatly varying load conditions in the Gulf countries. Such design concepts for hybrid configurations encompass straightforward structures with a low degree of coupling between membrane and thermal desalination processes, but range up to very complex configurations with strong interconnections on both the water side and thermally, as well as with several desalination processes connected in series or in parallel. Classical hybrid concepts in which the permeate from an RO desalination component is mixed with distillate from thermal desalination have already been implemented in Saudi Arabian dual-purpose plants, like Jeddah and Yanbu-Medina. Although hybrid systems of greater complexity have been addressed in many design studies and publications, up to now none has been brought to fruition. Coming into consideration asthe design basis for determining the capacity shares of the various desalination processes operated in a hybrid configuration are: arrangement of thermal cycle of the power plant component; water/power ratio of the dual-purpose seawater desalination and power plant; provision of undiminished water production of the desalination plant as electricity generation varies; provision of a specified drinking water quality with regard to composition and salt content; combination of all these aspects. Also gaining in importance are concerns of environmental pollution and sustainable development when selecting seawater desalination and power plant configurations, as well as their optimization when considering desalination and electricity generation as a whole. In the practical design of hybrid membrane and thermal systems, aspects come to light, though, that restrict linking of the two systems and joint utilization of facilities, as conceived in studies and conceptual design investigations. This applies both for common utilization of intakes and the use of heated up cooling water from thermal processes as a feed stream for the RO part of the desalination process. Additionally, requirements of drinking water composition, particularly chloride content, TDS and compliance with a specific residual content of boron, influence specifically the design of the membrane process part and its share in the total desalination capacity. Such practical aspects have greatly influenced the design and configuration of the Fujairah hybrid plant for which, from a total desalination capacity of 100 MIGD (454,600 m³/d), the share of 37.5 MIGD (170,500 m³/d) makes its seawater RO plant the biggest currently being constructed anywhere in the world. From the findings of the engineering of this plant and the idea that, by increasing interconnection between the two processes on the water side, it is possible to advance a hybrid configuration of this type with regard to cost optimization in the membrane installation, but also by joint utilization of the intake equipment, perspectives result for applied research efforts over the near and long terms, for example: long-term behavior of membranes at elevated temperatures; tendency for biofouling in membrane process with common utilization of cooling water and brine; influences of such interconnections on the overall availability of the facility. But also for the operation and maintenance organization of such large facilities, consequences can be foreseen for the future development of hybrid plants, particularly for operation management and organisation of the interplay of the different power plant and desalination systems, monitoring of SWRO membrane replacement and cleaning, as well as controlling water quality.     

Environmental etch performance, and scratch and mar of automotive clearcoats

Environmental etch damage to automotive coatings, and scratch and mar of these coatings are an important element of customer satisfaction as well as a significant warranty repair consideration for automotive companies. The conditions that result in environmental etch are examined and a laboratory test proposed. Data from this test are compared to automotive hoods exposed in Florida. The performance of various crosslinking chemistries is discussed and the requirements for improved environmental etch are outlined. Scratch and mar performance of these systems is also reviewed. We have found that coatings respond to physical stress by elastic recovery, by plastic flow and by brittle fracture. Classifying types of damage in this way is important for understanding the chemistry needed for improved scratch and mar of coatings.     

水体总磷测定方法的改进

采用过氧化氢消解水样，测定水中总磷的含量，春精密度为1.0%，回收率为96.8%-99.1%之间，此方法操作简单，稳定，准确，快速。     

Slow stable crack growth in high density polyethylenes

The phenomenon of slow stable crack growth in polyethylene is investigated using notched specimens subject to constant load and the concepts of fracture mechanics. The effect of specimen geometry and dimension, the loading and the mode of loading on the applied stress intensity factor versus crack speed ($\text{K}{}_{\mathrm{c}}\text{-}\text{a}\text{?}$) curves has been studied to demonstrate that K_c is the controlling stress parameter for crack growth under suitable conditions. $\text{K}{}_{\mathrm{c}}\text{-}\text{a}\text{?}$ curves are obtained for a high density polyethylene homopolymer in distilled water and in a diluted detergent solution at four different temperatures. Results are also obtained for a much tougher medium density polyethylene copolymer whenever possible. Several mechanisms can be identified from the form of the $\text{K}{}_{\mathrm{c}}\text{-}\text{a}\text{?}$ curves. Two, in particular, have been observed but not explained before: (i) crack growth with a time dependence of 0.25, and (ii) the high $\text{K}{}_{\mathrm{c}}\text{-}\text{a}\text{?}$ slopes for crack growth in a tough copolymer. With the help of scanning electron microscopic studies of the fracture surfaces, (i) is postulated to be due to diffusion controlled void growth process and (ii) is considered to be the result of crack tip blunting effects. From the temperature dependence of crack growth, the activation energy of the diffusion controlled crack growth process is found to coincide with that of the x-relaxation process in polyethylene implying that diffusion controlled crack growth may be related to the motion of main chains in the polymer.     

化肥厂造气污水处理新装置

介绍了一套新型造气污水处理装置，该装置具有处理工艺流程合理，设备布置紧凑，装置自动化运行的特点，造气污水经处理后重复循环使用，污泥送沸腾炉作燃料燃烧，实现了污水零排放的目的。     

水泥环保标准与国际接轨的技术经济分析

工艺治理和设备治理是水泥生产中防治污染物的方法。现行的《水泥厂大气污染物排放标准》(GB4915-1996)不仅与国际标准有一定差距,还与当前经济发展的形势和人们的环保要求不相适应。从我国水泥企业经济技术发展现状来看,我国水泥环保标准应与国际标准接轨。