Fast convergent study on potential－harmonic method of directly solving Schrodinger equation in few－body systems

Ｆａｓｔｃｏｎｖｅｒｇｅｎｔｓｔｕｄｙｏｎｐｏｔｅｎｔｉａｌ－ｈａｒｍｏｎｉｃｍｅｔｈｏｄｏｆｄｉｒｅｃｔｌｙｓｏｌｖｉｎｇＳｃｈｒｏｄｉｎｇｅｒｅｑｕａｔｉｏｎｉｎｆｅｗ－ｂｏｄｙｓｙｓｔｅｍｓＷａｎｇＹｉ－Ｘｕａｎ（王沂轩）ａｎｄＤｅｎｓＣｏｎｇ...     

工业产品的艺术造型与技术美学

本文从技术美学的角度，广义的介绍了工业产品艺术造型的基本方法，着重从美学原则和色彩设计两方面论述产品造型设计的手法，以及技术美学在产品造型设计中的基本应用。     

Effect of Forming Pressure on the Internal Structure of Alumina Green Bodies Examined with Immersion Liquid Technique

Green bodies prepared by compaction of alumina granules were made transparent by an immersion liquid technique, and the internal structure was characterized with an optical microscope to study the effect of forming pressure on the internal structure. Clear images obtained by the technique provide more detailed information than other existing methods for structures ranging from one to tens of micrometers. Intergranular pores were present between unfractured granules. Their sizes and concentration tended to decrease with increasing forming pressure. However, pores were clearly present even in the green body prepared at 600 MPa. A rod- and needlelike feature was also found and was concluded to correspond to a high-density region. The significance of large pores and high-density regions on processing as well as the details of the technique is discussed.     

圆锥形零件冲压变形与成形载荷的分析

由于悬空侧壁部分的变形状态是圆锥形零件成形的关键，而径向拉应力是实现悬空部分成形的必要条件，同时也是该部分冲压成形成败的关键为此，经力学分析得出了侧壁部分径向拉应力的解析式和造成圆锥形零件破裂的最大径向拉应力的计算式。同时分析了圆锥形零件的成形载荷。     

IR Radiometry Optical System View Factor and Its Application to Emissivity Investigations of Solid and Liquid Phases

An optical system for fast IR radiometry designed for investigations of thin film thermal properties and pulsed laser melting was analyzed in this work. A methodology for determination of the view factor from calibration measurements was developed. The view factor (0.0255) of the optical system containing two paraboloid mirrors was determined experimentally from calibration measurements on pure metals and metallic alloys. The knowledge of the view factor was then applied to normal emissivity investigations at IR wavelengths. The emissivity of tungsten films prepared by magnetron sputtering was determined for different deposition conditions, varying between 0.036 and 0.071. Liquid phase emissivities of Cu, Mo, Ni, Si, Sn, Ti, and steel were also determined and were found to be higher than solid-state emissivities as predicted from the literature. A knowledge of the liquid-state emissivity of silicon enabled recalculation of the IR signal evolution to the temperature evolution, during and after a nanosecond laser pulse. This was not possible by use of the usual calibration because of silicon’s semi-transparent behavior in the IR range (1–10 μm) in the solid-state phase.     

New Technology for Producing Molybdenum Wire Billets

On the basis of systematic studies of intense methods for metal forming, a production scheme has been developed, substantiated by experiment and realized for manufacturing molybdenum wire. The main stages are helical rolling of small rounded bars, vibratory drawing with induction heating of wire billets, and cold wire drawing with hydrodynamic introduction of lubricant and application to the tool of vibration in the transitional stages of the process (start-up, speed-up, slow-down, and stopping the pulling tool drive).     

SISAK快速化学分离装置的建立

SISAK(Short-lived Isotopes Studies by the AKUFVE technique)技术是目前使用最广泛的快速化学分离方法之一,主要应用在短寿命核素的分离和鉴别、超重元素的人工合成以及化学性质研究等方面的工作中.本文简单地叙述了SISAK技术的流程、原理和发展现状,介绍了自行建立的国内第一套基于SISAK技术的快速化学分离装置,并通过从裂变产物中分离短寿命核素这一实例验证了SISAK技术在快速化学分离中的优越性.     

楔块体积成形模的应用

本文介绍了几种典型楔块体积成形模的工作原理,以及它们在模具工业上的应用。     

检测骨架图形特征点的新方法

端点、折点、歧点和交点是骨架图形的重要特点是，提出用快速查表法检测侯选特征点，再进行侯选特征点聚集，用局部结构分析，去除假特征点，判别真特征点的类型，并对折点给以大致的定量描述。实验结果表明，该方法能快速有效地找出骨架图形的特征点，在目标识别、字符识别等应用中起着关键作用。     

Determination of friction coefficient encountered in large deformation processes

A new technique, namely, the open-die backward extrusion test technique, was developed as an alternative method to the ring compression test in order to quantitatively evaluate the coefficient of friction, μ, at the die/workpiece interface. This technique relates the percentage deformation in height of the specimen to the percentage increase in extruded height of the specimen. In this study, the open-die backward extrusion tests (ODBET) were simulated for different aspect ratios, (H/D), and different die geometries, (d/D), by utilizing an elastic-plastic finite element code (ANSYS) in order to obtain the friction calibration curves (FCCs). The results indicated that the extruded height is related to the friction conditions at the die/workpiece interface. Therefore, ODBET can be used to generate FCCs to determine the coefficient of friction at the die/workpiece interface in large deformation processes.