Microstructure evolution during metal forming processes

Recrystallization and grain growth evolutions during metal forming processes are considered. Coupling between the thermo-mechanical and microstructure processes is realized. Die forging of a rear-axle flange is simulated numerically on the base of the finite element method. Material parameters of the models are obtained experimentally. The influence of interpass and holding times on grain size distributions in the end product is shown.     

Determination of Flow Curves at High Strain Rates using the Electromagnetic Forming Process and an Iterative Finite Element Simulation Scheme

The knowledge of reliable material parameters is an essential requirement for the numerical analysis and planning of forming processes, especially when using high speed forming processes in industry. Therefore, a method was developed and implemented to determine the relationship between yield stress, plastic strain, and strain rate of aluminium alloys at very high strain rates of up to 10,000 s-1 by using the electromagnetic forming process (EMF) of tubular specimens. To determine the associated flow curves, an inverse engineering strategy combining an online measurement technique and multi-physical coupled finite element simulations is used. The results are discussed with regard to the anisotropic behaviour of specific aluminium alloys.     

Simulation of the Forming Behaviour of a Boron Modified P91 Ferritic Steel

The forming behaviour at high temperature of a modified 9%Cr‐1%Mo (P91) ferritic steel containing B and Ti for elevated temperature service was investigated. The microstructure of the as‐received material is mainly martensite at room temperature, but special etching revealed prior austenite grains of about 25 μm in size. Torsion tests were conducted at temperatures in the range 850 to 1250 °C to simulate the hot rolling process under comparable conditions of temperature, strain rate and strain. The deformation data obtained from these tests were correlated with the Garofalo equation with a stress exponent of 4.6 and an activation energy of 315 kJ/mol. This equation was used to predict the formability behaviour for the rolling process and also to determine the maximum forming efficiency and stability of the steel. A temperature of 1200 °C is recommended to conduct the forming process.     

服装设计中分割线的应用

分割线在服装设计中的作用极其重要 ,它既具有造型特点 ,又具有功能特点 ,从分割线的效果阐述了分割线在服装设计中的应用。     

Study of the potential valorisation of heavy metal contaminated biomass via phytoremediation by fast pyrolysis: Part II: Characterisation of the liquid and gaseous fraction as a function of the temperature

Fast pyrolysis of heavy metal contaminated birch (CMB), resulting from phytoremediation, is investigated. The effect of the pyrolysis temperature (673, 773, 873 K) on the composition and evolution of the bio-oil/tar fraction and the gas fraction has been studied. The knowledge of the composition of the gaseous and liquid pyrolysis fractions, as a function of the pyrolysis temperature, affects directly future applications and valorisation of the pyrolysis products and are indispensable for making and selecting the proper thermal conditions for their optimal use. In view of the future valorisation of this heavy metal contaminated biomass, the pyrolysis temperature is imperative, because some of the heavy metals can volatilize at temperatures generally used for the co-combustion or fast pyrolysis of biomass.     

ԥ�������С��¶���ͳ��������

豫西地区中、下二叠统太原组、山西组、上石盒子组及下石盒子组煤成气资源丰富，但成煤环境纵向发育与横向变化较大，规律难于把握。因此，开展煤成气源岩沉积环境研究有利于该区煤成气资源的勘探与开发及合理的利用。通过露头、钻井、地震资料及分析、测试资料的综合研究认为：本区中、下二叠统主要沉积了一套浅海碳酸盐岩，海湾-泻湖、潮坪、沼泽、障壁岛(砂质滩、坝)及三角洲相陆源碎屑岩和煤层。从总的沉积特征来看，下二叠统太原组、山西组基本上发育滨、浅海相碳酸盐岩、陆源碎屑岩和煤的混合沉积。上二叠统上、下石盒子组则以海陆交互相陆源碎屑沉积为主，三角洲及三角洲平原沼泽十分发育；沉积环境具有自下而上，自南东向北西方向由海相逐步过渡为陆相的基本特点。其煤成气源岩沉积环境以早二叠世山西期潮坪、泻湖过渡带之滨岸沼泽环境为最佳，其次为中二叠世下石盒子期三角洲平原沉积之平原沼泽环境。     

以循环移位控制为基础的相控阵天线快速测量方法研究

为了解决相控阵天线快速测试问题,本文研究了一种相控阵天线测量的新方法。该方法中相控阵天线和测试探头均不动,利用相控阵天线中各移相器的移相状态可循环移位控制的特点和相控阵天线一些已知可信的信息,从而使测量具有极高的效率。文中对一相控阵天线模型采用该测量方法的测量全过程进行模拟,验证了该方法的正确性和高效性。     

中密度纤维板真空机械铺装机的开发与改进浅析

简述中密度纤维板真空机械铺装机的料仓、铺装头、真空铺装等结构组成与铺装成型的关系,并结合调试与使用经过,提出改进措施。     

Efficient Legendre moment computation for grey level images

Legendre orthogonal moments have been widely used in the field of image analysis. Because their computation by a direct method is very time expensive, recent efforts have been devoted to the reduction of computational complexity. Nevertheless, the existing algorithms are mainly focused on binary images. We propose here a new fast method for computing the Legendre moments, which is not only suitable for binary images but also for grey level images. We first establish a recurrence formula of one-dimensional (1D) Legendre moments by using the recursive property of Legendre polynomials. As a result, the 1D Legendre moments of order p, L_p=L_p(0), can be expressed as a linear combination of L_p-1(1) and L_p-2(0). Based on this relationship, the 1D Legendre moments L_p(0) can thus be obtained from the arrays of L₁(a) and L₀(a), where a is an integer number less than p. To further decrease the computation complexity, an algorithm, in which no multiplication is required, is used to compute these quantities. The method is then extended to the calculation of the two-dimensional Legendre moments L_pq. We show that the proposed method is more efficient than the direct method.     

快中子探测器的效率刻度

本文叙述了用n-p散射方法刻度快中子探测器效率的基本原理、实验方法和测量结果。400 keV氘束轰击T-Ti靶,由T(d,n)~He反应得到15.2 MeV的中子,散射体是一个圆柱塑料闪烁体(φ2.2×3cm),飞行距离2m,时间分辨率约1.5ns,效率测量的能区范围为1—14MeV,对多次散射和几何条件作了修正,总的误差约2%。