一种8毫米波变张角,半径突变多模圆锥馈源

我们研制了一种8毫米波变张角、半径突变的多模圆锥馈源。计算出其模比并推导出其辐射方向图公式;给出其在两个主平面——E平面与H平面上的辐射方向图和波束场分布特性的测试结果以及电压驻波比VSWR的测量结果;同时给出频带和旁瓣特性。分析与测试共同表明,在34.5GHz～37GHz频带里,该多模馈源的辐射图在大于24dB范围内获得幅度等化且不出现旁瓣,因此具有一定的应用价值。     

美国大联盟高清晰度电视地面传输系统野外测试结果

本文概述了ＧＡ－ＨＤＴＶ的地面ＶＳＢ传输系统的野外测试验情况。此次测试由联邦以通信委员会高级电视业务咨询委员会负责组织。     

单嘴精炼装置真空室内卷渣水模型研究

本文针对长城特殊厂单嘴精炼装置进行了真空室内加渣精炼的卷渣水模型研究。在试验的基础上，首先讨论了真空室内卷渣现象的工艺过程，然后进一步得出了临界吹气量的表达式。研究结果为工业性生产进一步提高钢的质量打下了基础。     

悬浮型速溶PHPAM堵水剂及其堵水技术

本文介绍了以悬浮型速溶PHPAM为基础研制的低温油井堵水剂,讨论了影响堵水剂交联时间和成胶粘度的因素,制定了移动式弹性隔板堵水工艺并成功地应用于二连油田蒙古林砾岩油藏的油井堵水。该堵剂适用于30—60℃油井,交联时间可控、配制简便、快速、施工周期短。     

解放思想 与时是 创新技术 加强管理 为实现油田高水平高效益开发而奋斗—在2001年度大庆油田有限责任公司开发技术座谈会上的讲话

对大庆油田2001年开发技术工作进行了总体评价，分析了油田开发所面临形势和存在的问题，提出的200年油田开发工作总体思路和目标是：紧紧围绕“高水平，高效益，可持续发展”的工作方针，认真按照“发展稳油控水技术，加快三次采油研究步伐，深化油藏地质研究，优化规划方案设计，强化油田科学管理，提高开发总体效益”的要求，进一步解放思想，与时俱进，突破四人束缚，创新九项技术，强化六项管理，加强队伍建设，把油田开发工作推向一个新的水平。     

Correlation study between standard plate count and flow cytometry for determination of raw milk total bacterial count

Milk samples were collected in the dry season ( n =  155) and in the rainy season ( n =  68) to establish a correlation between electronic flow cytometry and standard plate count for the determination of total bacterial count of raw milk. Results were expressed in individual bacterial count (ibc) and colony forming unit (cfu) for electronic flow cytometry (Bactocount) and standard plate count, respectively. The accuracy of Bactocount, denoted by the residual standard deviation ( s ( y,x )), was 0.309 log cfu/mL. The predictive interval of estimated values was broad and it is suggested that total bacterial count should be expressed in ibc without transformation to cfu.     

前置酸加砂压裂新工艺试验研究及现场应用

通过整合酸压和加砂压裂技术优势，集成为前置酸加砂压裂工艺技术。该工艺技术主要通过酸液溶蚀提高储层渗透性、抑制粘土矿物膨胀、溶解压裂液滤饼及残胶、酸压缝内填充支撑剂提高导流能力等4个方面的作用来提高改造效果。结合不同试验区储层特征，优选了酸液体系，创造性地形成了与长庆低渗透储层特点相适应的前置酸加砂压裂工艺技术，在镇53等5个区块共计试验百余口，取得了较好试验效果，为长庆低渗油田的改造提供了一项新技术措施。     

一种气体缓流流量测量用传感器的研究

本文提出了一种采用悬挂靶的流量传感器，并对其工作特性进行了理论分析及试验研究，这种传感器具有很好的低流速（流量）测量特性，并且具有易于交换量程，工作可靠等优点，试验表明，悬挂靶式流量传感器可测量流速低于１ｍ／ｓ的空气管流。     

Experiments with a hybrid interior point/combinatorial approach for network flow problems

Interior point (IP) algorithms for Min Cost Flow (MCF) problems have been shown to be competitive with combinatorial approaches, at least on some problem classes and for very large instances. This is in part due to availability of specialized crossover routines for MCF; these allow early termination of the IP approach, sparing it with the final iterations where the Karush Kuhn-Tucker (KKT) systems become more difficult to solve. As the crossover procedures are nothing but combinatorial approaches to MCF that are only allowed to perform few iterations, the IP algorithm can be seen as a complex ‘multiple crash start’ routine for the combinatorial ones. We report our experiments of allowing one primal-dual combinatorial algorithm to MCF to perform as many iterations as required to solve the problem after being warm-started by an IP approach. Our results show that the efficiency of the combined approach critically depends on the accurate selection of a set of parameters among very many possible ones, for which designing accurate guidelines appears not to be an easy task; however, they also show that the combined approach can be competitive with the original combinatorial algorithm, at least on some ‘difficult’ instances.     

Simulation Method of Dynamic Characteristics of Turbine Flow Sensor

Computational Fluid Dynamics (CFD) simulation is one of the important methods to study the performance and in-fluencing factors of turbine flow sensors. According to the working characteristics of the turbine flow sensor, the passive simulation method based on the six degrees of freedom (6-DOF) model and dynamic mesh is proposed in this paper. The reliability of the simulation method is verified by steady-state experiments and unsteady-state experiments. The results show that the trend of meter factor with flow rate acquired from the simulation is close to the experimental results, and the deviation between the simulation result and the experiment result is low with a maximum deviation of 2.88%. In the unsteady simulation study, the impeller speed changes with the inlet velocity of the turbine flow sensor, which has a good follow-up. The passive simulation method can be used to predict the dynamic performance of the turbine flow sensor.