Filiform corrosion attack on pretreated aluminum alloy with tailored surface of epoxy coating

In the study, on the basis of material analysis of 6016 aluminum alloy widely used in Europe automotive industry, the influences of surface pretreatment on filiform corrosion and adhesion of epoxy coating/aluminum alloy interface were investigated, and the effect of rolling direction and coating property on filiform corrosion was also examined. The alloy surfaces were pretreated with etching solution, and then, respectively, with Aminopropyl silane solution, Aminopropyl phosphonate solution, and hexamethyldisiloxane plasma.The results showed that the susceptibility of pretreated surface to filiform corrosion was basically consistent with the distribution of intermetallic particles, and that water permeation and the tensility of coating were necessary for filament to grow. HMDSO plasma pretreatment could not only efficiently cover the matrix of 6016 aluminum alloy and cathodic intermetallic particles containing Al, Si, Mn, and Fe, but also apparently promote the adhesion of epoxy coating/aluminum alloy, as a result, the specimens with plasma pretreatment exhibited the superior performance in the filiform corrosion and peeling tests, so it was suitable to apply for the pretreatment of aluminum alloy in automotive industry.     

TiAl基合金与陶瓷界面反应的研究

借助电子探针微区分析仪、维氏显微硬度计、光学和电子显微镜对TiAl合金与Al2O3,ZrO2以及经CaO稳定的ZrO23种陶瓷型壳的界面反应进行了研究分析。结果表明，这3种材料的化学稳定性依次升高，而经CaO稳定的ZrO2型壳与TiAl反应层的厚度仅为50μm,故可望用作钛铝合金精密铸造型壳面层材料。     

Corrosion rate of magnesium and its alloys in buffered chloride solutions

The effect of the buffer capacity of test solution on the corrosion rate of cast pure (>99.95 mass%) and high-purity (>99.9999 mass%) magnesium, and AZ31 and AZ91E has been studied. Their corrosion rates were measured gravimetrically in a pH 6.5 and a pH 9 borate buffer including chloride ions, and in a conventional chloride solution. Except for the AZ91E in the pH 6.5, the corrosion rates of all the examined materials depended solely on the pH of the test solution, although the materials had a variety of purity and alloying elements. Higher buffer capacity probably masked the detrimental effect of the “cathodic impurities”. The corrosion rates measured in the buffers were considered as giving the resistivity of the passive film to anodic reactions. The high-purity magnesium had a fair corrosion resistance even in conventional chloride solution.     

铝合金车轮铸造模具CAD/CAE技术的应用

随着计算机应用技术的发展，CAD/CAE技术已广泛应用于各行各业的设计，主要介绍了铝合金年轮铸造模具上应用CAD/CAE技术的成效。     

钛合金冷坩埚电磁约束铸造工艺研究

针对液态下化学性质相对活泼的钛合金,采用冷坩埚技术对电磁约束铸造工艺过程进行了试验研究,考察了工艺条件对成形坯件表面质量和内部组织的影响.结果表明:试样抽拉速度变化对表面质量和宏观组织的影响明显,加热功率虽然对组织变化影响不大,但对表面质量影响较为显著.通过优化工艺,可以获得既有较光滑铸造表面又具有一次定向凝固组织的钛合金铸件.讨论了铸造过程裂纹和组织缺陷的形成机理,获得到了表面光滑无裂纹,宏观组织为柱状晶的钛合金大尺寸圆坯.     

Evaluation of high Ni-Cr-Mo alloys for the construction of sulfur dioxide scrubber plants

Corrosion in wet lime/limestone systems used for flue gas desulfurization in thermal power plants is of great concern. The frequent variations in acidity and in chloride and fluoride ion concentrations experienced by such systems pose a serious threat to the materials of construction. Currently used materials mostly type 316L stainless steel often fail to meet their life expectancy. The present study evaluates the performance of advanced Ni- Cr- Mo alloys 59 and C- 276 in a simulated sulfur dioxide scrubber environment. Accelerated tests showed that high Ni- Cr- Mo alloys have little tendency to leach metal ions such as chromium, nickel, and molybdenum at different impressed potentials. Scanning electron microscopy was used to examine the morphology of pitting attack.     

Ag—AgI指示电极电位滴定法测定钯

研究了铂、钯、金、铂镀金、石墨及Ag—AgI指示电极,提出了一个用Ag～AgI指示电极(vs.SCE),碘化钾电位滴定钯的方法。该方法可应用于钯合金、氯化钯、钯催化剂中钯的测定。对于含钯60％和O.5％的物料,变异系数分别为0.5％和4％。     

耐蚀钛合金的发展与应用

由于工业纯钛难于适应化工、采油等苛刻环境应用，促进了耐蚀钛合金的发展。本文对耐蚀钛合金的设计理论与试验作了分析，并对近期开发的耐蚀钛合金作了介绍，展望了耐蚀钛合金的应用。     

Cr3Si／Crl3Ni5Si2金属间化合物合金组织与高温滑动磨损性能的研究

利用水冷铜模激光熔炼炉制得了由初生枝晶Cr3Si和枝晶间Cr3Si／Crl3Ni5Si2共晶组成的金属间化合物合金。利用OM，SEM，TEM，EDS和XRD分析了该金属间化合物的显微组织，在400℃，500℃和600℃条件下测试了其耐磨性能。结果表明，由于Cr3Si和Crl3NisSi2硬度高、原子键合力强、组织细小、均匀，在高温滑动磨损条件下具有优良的耐磨性能。     

钛及钛合金电弧钎焊及接头强度

用Ti—Cu—Ni，Ti-Cr-Zr钎料在TIG电弧加热条件对TA2和Ti—6Al—4V钛合金进行钎焊。结果表明：用Ti—Cu—Ni钎料钎焊TA2和Ti—6Al—4V钛合金的搭接接头强度分别是418．3MPa和439．6MPa；用Ti—Cr—Zr钎料钎焊TA2和Ti—6Al—4V钛合金的搭接接头强度分别是575．2MPa和656．1MPa。对Ti-Cu-Ni钎料／母材界面分析认为固液异分化合物η相((Cu，Ni)Ti2)生成时呈笋状生长，嵌入钎缝对钎缝的强度提高有利。对Ti-Cr-Zr钎料／母材界面分析，认为主要是固溶体β-Ti(Cr)存在提高了钎缝强度。