窄带,高矩形度声表面波滤波器的研制

声表面波滤波器因其在电子系统中的使用和使用环境的不同，具有不同的指标要求。文章介绍了一种窄带，高矩形度声表面波滤波器的设计过程，制作出了中心频率为１４０．９～１４５．１ＭＨｚ四路器件，其相对带宽０．３９％；矩形系数小于２．５，并成功应用于整机系统。     

声表面波巴克码低旁瓣滤波器组

报道了声表面波巴克码低旁瓣滤波器组的结构、器件和电路的研制，指出了技术特点及其应用情况     

声表面波器件用零温度系数基片材料

SAW器件要求具有低延时温度系数、高机电耦合系数和高传播特性的良好基片材料。迄今为止,还没有一种材料能满足上述要求,为此,人们进行了大量的努力来寻求解决。本文主要叙述具有零温度系数的LST一切石英、双旋转切LiNbO_3、63.6°Y一切LiTaO_3单晶新切型和几种层状结构基片材料的制法和性能。并列举了实验器件的特性。     

用于频率合成的声表面波滤波器

介绍了几组用于扩频系统的声表面波滤波器的设计、制作和实验结果.器件频率为95～350MHz.插入损耗为9～24dB.阻带抑制优于45dB.     

三旋LiNbO3基片温度特性试验

介绍了一种三旋转切割ＬｉＮｂＯ３基片，以及针对这种基片而作的温度特性试验情况。     

Studies on a surface acoustic wave (SAW) dosimeter sensor for organophosphorous nerve agents

As a follow-up of previous work on a Surface Acoustic Wave (SAW) sensor for nerve agents, irreversible response effects have been studied in more detail. Surface analytical studies indicated that degradation products are responsible for the effects observed. In addition it was tried to explore these effects for the development of a nerve agent dosimeter. Experiments were conducted to test the performance of a SAW sensor coated with La(III) 2-bis(carboxymethyl)amino hexadecanoic acid. The experiments revealed that many improvements must be made especially with respect to sensitivity and linear response behaviour.     

钢制收发球筒埋弧焊焊接

介绍了长输原油管道上使用的收发球筒的焊接方法、焊接工艺、焊缝质量检验及注意事项.     

无绳电话用声表面波滤波器

本文讨论了研制的两种无绳电话机用声表面波滤波器，中心频率为４６．５７ＭＨｚ和４９．９ＭＨｚ；△ｆ＿（－３ｄＢ）＝１．７ＭＨＺ；插损≤１０ｄＢ；△ｆ＿（－４０ｄＢ）／△ｆ＿（－３ｄＢ）≤３．５；阻带抑制≤－４０ｄＢ。采用了低插损的三换能器结构。输入叉指换能器采用了波阵面均匀的孔径加权和相位加权，减小了变迹损耗。理论计算与实验结果一致。     

外加磁场对AZ31镁合金焊接接头组织性能的影响

在对5mm厚的AZ31镁合金板进行GTAW焊接的过程中,外加纵向交流磁场,研究了磁场对焊接接头的力学性能和显微组织的影响,并探讨了磁场的作用机理。结果表明:外加纵向磁场通过旋转电弧对熔池进行搅拌,不仅可以细化晶粒,使焊接接头的抗拉强度、硬度得到改善,还可以净化熔池中液态镁合金(使杂质球化并弥散分布),此外磁场的引入还可降低镁合金焊接热裂纹的敏感性,抑制热裂纹的产生。     

Improvement in Power Durability of Al Electrode Films Used in SAW Devices by Zr Additive and Ti Underlayer

In order to improve the power durability of Al electrode films and obtain fine-dimensional control in high-frequency surface acoustic wave (SAW) devices, two-layered Al-Zr/Ti electrode films were investigated on 128°Y−X LiNbO₃ substrates by sputter deposition. The results indicated that Al-Zr/Ti electrode films had improved electromigration (EM) reliability compared to Al/Ti electrode films and their lifetime was strongly dependent on the microstructure and Zr concentration. Al-Zr/Ti electrode films with a strong Al (111) texture exhibited longer EM lifetime than polycrystalline films. The Al-Zr/Ti electrode film with an ideal Zr concentration of 0.2 wt.% and a sputtering pressure of 0.25 Pa had a strong Al (111) texture, and its lifetime was approximately four times longer than that of Al/Ti films tested at a current density of 5 × 10⁷ A/cm² at 200°C. Furthermore, the Al-Zr/Ti films were easily etched in reactive ion etching and fine-dimensional control was realized during pattern replication for high-frequency SAW devices.